• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.1
• /
• pp.38-48
• /
• 2002

This study examines the relationships between atmospheric influences and grain yields including yield components as well as growth stages. Data used in this study were collected from the long-term field experiment at Suwon for the period between 1974 and 2000. Mean grain yield of barley cultivar, Olbori, for the recent 14 years(1987∼2000) with warm winters was higher by 0.42 ton per hectare than that for 27 years(1974∼2000) at Suwon as a result of the higher numbers of spikes per unit land area and grains per spike. However, the 1000-grain weight decreased by about 0.6 gram. Mean first day of regrowth for the recent 14 years was earlier by five days than that for 27 years. Also, beginning date of regrowth was positively correlated with that of heading and ripening. Mean period of ripening for the years of 1987 through 2000 was similar to that for 27 years, but mean period of overwintering was shorter by nine days than that for 27 years. On the other hand, mean periods of seedling and tillering were longer by three days than those for 27 years. Meteorological elements at various growth stages affecting grain yield of winter barley were air temperature (positive correlation) and sunshine hour (negative correlation) of overwintering stage, precipitation (negative correlation) of tillering stage, and potential evapotranpiration (positive correlation) of tillering stage. The 1000-grain weight was not significantly correlated with the meteorological elements. Culm length was negatively influenced by high temperature and dry weather situations during the ripening period, but spike length was positively influenced. Overall, it was found that grain yield of barley, cultivar Olbori, was iufluenced by meteorological elements of overwintering, tillering, and ripening stages.

• Korean Journal of Veterinary Research
• /
• v.40 no.2
• /
• pp.361-371
• /
• 2000

It has been recently reported that 2-bromopropane (2-BP) induces male reproductive toxicity in both human and experimental animals. However, delayed effects of 2-BP on male reproductive system have not been investigated in detail. The present study was conducted to investigate the testicular toxicity of 2-BP and to determine the recovery of normal spermatogenesis in Sprague-Dawley rats. Male rats aged 5 weeks were administered 1,000mg/kg 2-BP by gavage daily for 4 weeks and sacrificed sequentially at 1, 2, 3, 4 and 12 weeks after initiation of 2-BP treatment. Testicular toxicity was evaluated qualitatively by histopathological examinations and quantitatively by reproductive organ weights, spermatid head count, and repopulation index. In the 2-BP treated rats, the body weights was significantly suppressed and the weights of testes and epididymides were also decreased in a time-dependent manner. On histopathological examination, spermatogonia in stages I-VI and preleptotene and leptotene spermatocytes in stages VII-IX were strongly depleted at 1 week of dosing. Spermatogonia were depleted extensively in all spermatogenic stages at 2 weeks. Continuing with the evolution of spermatogenic cycle, zygotene spermatocytes, pachytene spermatocytes, and round spermatids were sequentially depleted at 2, 3, and 4 weeks of dosing due to the depletion of their precursor cells. Vacuolization of Sertoli cells and spermatid retention were also observed at all time points, suggesting that 2-BP induced Sertoli cell dysfunction. At 12 weeks, after 8 weeks recovery, most of the tubules appeared severely atrophic and were lined by Sertoli cells only. Leydig cell hyperplasia in the interstitial tissue was also found. In addition, dramatic reductions in the number of spermatid heads and repopulation index were observed, indicating that 2-BP-induced testicular injury is irreversible. These results indicate that 4 weeks repeated-dose of 1,000mg/kg 2-BP results in a progressive germ cell loss due to the depletion of spermatogonia followed by long-term testicular atrophy in SD rats.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.675-681
• /
• 2021

Recently, the Ministry of Education stipulates in the distance class operation regulations that student lecture evaluations for distance learning subjects should be conducted at least twice per semester and the results should be disclosed to students. Therefore, the lecture evaluation of D college was compared with the first semester of 2020 and the first semester of 2021. As for the multiple-choice evaluation result of the distance learning mid-course evaluation, the overall average of the mid-course evaluation of the distance class in the first semester of 2020 increased from 4.1819 to 4.4000 in the mid-course evaluation in the first semester of 2021.In the case of the first semester of 2020, due to Corona 19, all non-face-to-face classes were held, but in the first semester of 2021, face-to-face classes increased. The overall satisfaction level rose from 4.18 points in the first semester of 2020 to 4.39 points in the first semester of 2021. The screen composition, sound and picture quality, playback time, face appearance, lecture material provision, and frequency of use of the top 3% and bottom 3% also increased. Despite the changes caused by the LMS replacement, which was a concern, student attendance, assignments, and test submission rates also increased compared to the previous year. The null hypothesis that 'the difference between the two scores is the same' is the null hypothesis because the probability of significance is 0.000 and less than 0.05 in the case of the best 3% of the test result of the test result of the mid-course evaluation of distance classes in the first semester of 2020 and the evaluation of the intermediate lectures in the first semester of 2021. As this was rejected, it can be seen that the best score for the 2021 school year has significantly increased compared to the first semester of 2020. Also, in the case of Worst 3% or less, the significance probability is 0.000, which is less than 0.05, so the null hypothesis that 'the difference between the two scores is the same' was rejected, indicating that the Worst score for the 2021 school year was significantly higher than that for the first semester of 2020.

• Economic and Environmental Geology
• /
• v.53 no.6
• /
• pp.667-675
• /
• 2020

An Alum-sludge based adsorbent (ASBA) was synthesized by the hydrothermal treatment of alum sludge obtained from settling basin in water treatment plant. ASBA was applied to remove fluoride and arsenic in artificially-contaminated aqueous solutions and mine drainage. The mineralogical crystal structure, composition, and specific surface area of ASBA were identified. The result revealed that ASBA has irregular pores and a specific surface area of 87.25 ㎡ g-1 on its surface, which is advantageous for quick and facile adsorption. The main mineral components of the adsorbent were found to be quartz(SiO2), montmorillonite((Al,Mg)2Si4O10(OH)2·4H2O) and albite(NaAlSi3O8). The effects of pH, reaction time, initial concentration, and temperature on removal of fluoride and arsenic were examined. The results of the experiments showed that, the adsorbed amount of fluoride and arsenic gradually decreased with increasing pH. Based on the results of kinetic and isotherm experiments, the maximum adsorption capacity of fluoride and arsenic were 7.6 and 5.6 mg g-1, respectively. Developed models of fluoride and arsenic were suitable for the Langmuir and Freundlich models. Moreover, As for fluoride and arsenic, the increase rate of adsorption concentration decreased after 8 and 12 hr, respectively, after the start of the reaction. Also, the thermodynamic data showed that the amount of fluoride and arsenic adsorbed onto ASBA increased with increasing temperature from 25℃ to 35℃, indicating that the adsorption was endothermic and non-spontaneous reaction. As a result of regeneration experiments, ASBA can be regenerated by 1N of NaOH. In the actual mine drainage experiment, it was found that it has relatively high removal rates of 77% and 69%. The experimental results show ASBA is effective as an adsorbent for removal fluoride and arsenic from mine drainage, which has a small flow rate and acid/neutral pH environment.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.606-612
• /
• 2022

Relatively high indoor CO₂ concentration (>1,000 ppm) has a negative impact on human health. In this work, indoor CO₂ adsorbent was developed by impregnating KOH or K₂CO₃ on commercial activated carbon, named as KOH/AC and K₂CO₃/AC. Commercial activated carbon (AC) showed relatively high BET surface area (929 m²/g) whereas KOH/AC and K₂CO₃/AC presented lower BET surface area of 13.6 m²/g and 289 m²/g. Two experimental methods of TGA (2,000 ppmCO₂, weight basis) and chamber test (initial concentration: 2,000 ppmCO₂, CO₂ IR analyzer) were used to investigate the adsorption capacity. KOH/AC and K₂CO₃/AC exhibited similar adsorption capacities (145~150 mg_CO2/g), higher than K₂CO₃/Al+Si supports adsorbent (84.1 mg_CO2/g_sample). Similarly, chamber test also showed similar trend. Both KOH/AC and K₂CO₃/AC represented higher adsorption capacities (KOH/AC: 93.5 mg_CO2/g K₂CO₃/AC: 94.5 mg_CO2/g_sample) K₂CO₃/Al+Si supports. This is due to the KOH or K₂CO₃ impregnation increased alkaline active sites (chemical adsorption), which is beneficial for CO₂ adsorption. In addition, the regeneration test results showed both K-based adsorbents pose a good regeneration and reusability. Finally, the current study suggested that both KOH/AC and K₂CO₃/AC have a great potential to be used as CO₂ adsorbent for indoor CO₂ adsorption.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.2
• /
• pp.28-41
• /
• 2023

The objective of the study was to develop an Urban Windway Forest Creation Planning Technique for the Improvement of the Urban Environment using the case of Daejeon Metropolitan City. Through a spatial analysis of fine dust and heat waves, a basin zone, in which the concentration was relatively serious, was derived, and an area with the potential of cold air flow was selected as the target area for the windway forest development by analyzing the climate and winds in the relevant zone. Extreme fine dust areas included the areas of the Daejeon Industrial Complex Regeneration Business District in Daedeok-gu and Daedeok Techno Valley in Yuseong-gu. Heat wave areas included the areas of Daedeok industrial Complex in Moksang-dong, the Daejeon Industrial Complex Regeneration Business District in Daehwa-dong, and the high-density residential area in Ojeong-dong. As a result of measuring the wind speeds in Daejeon with an Automatic Weather System, the average wind speeds during the day and night were 0.1 to 1.7 m/s,, respectively. So, a plan of for a windway forest that smoothly induces the movement of cold air formed in outer forests at night is required. The fine dust/heat wave intensive management zones of Daejeon Metropolitan City were Daejeoncheon, Yudeungcheon, Gapcheon-Yudeungcheon, and Gapcheon. The windway forest formation plan case involved the old city center of Daejeon Metropolitan City among the four zones, the Gapcheon-Yudeungcheon area, in which the windway formation effect was presumed to be high. The Gapcheon-Yudeungcheon area is a downtown area that benefits from the cold and fresh air generated on Mt. Gyejok and Mt. Wuseong, which are outer forests. Accordingly, the windway forest was planned to spread the cold air to the city center by connecting the cold air generated in the Seosa-myeon forest of Mt. Gyejok and the Namsa-myeon forest of Mt. Wuseong through Gapcheon, Yudeungcheon, and street forests. After selecting the target area for the wind ventilation forest, a climate map and wind formation function evaluation map were prepared for the area, the status of variation wind profiles (night), the status of fine dust generation, and the surface temperature distribution status were grasped in detail. The wind ventilation forest planning concept and detailed target sites by type were identified through this. In addition, a detailed action plan was established according to the direction of creation and setting of the direction of creation for each type of wind ventilation forest.

• The Korean Journal of Mycology
• /
• v.25 no.2 s.81
• /
• pp.143-151
• /
• 1997

Interspecific hybrids between Aspergillus niger and Penicillium notatum (Tyr-), hyperlipolytic enzyme-producing fungi, were obtained by nuclear transfer technique. Optimal conditions for formation of intergeneric hybrids were investigated. Maximum production of protoplasts was obtained by 1% Novozyme 234 at $30^{\circ}C$ for 3 hrs and the most effective osmotic stabilizers for the isolation of protoplasts were 0.6 M KCl. Frequencies of hybrid formation by nuclear transfer were $3.8{\times}10^{-3}{\sim}1.3{\times}10^{-3}$. From the observation of genetic stability, conidial size, DNA content, and nuclear stain, it was suggested that their karyotypes are aneuploid. The hybrids showed $1.2{\sim}1.7$ fold higher lipase activities than parental strains. It was strongly supported by results of this study that nuclear transfer technique is much more efficient in the formation of intergeneric hybrids than protoplast fusion and is very useful for the improvement of strains.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.2
• /
• pp.34-43
• /
• 2009

Based on previous research on ways of reducing an urban heat island phenomenon via an introduction of wind corridors, I conducted this study to see what influence a change in land cover arising of or going through urbanization has on wind corridors of urban space. As a target place, I chose Daegu city where is a representative extreme heat place in Korea and has been also largely expanded in size by incorporating its neighboring areas since the 1980s, expecially Dalseo District whose surface temperature gap is large. The population of Dalseo District has been sharply increased since its creation as a new administrative district in 1988. I studied on the urban microclimate change for a 20-year period by using satellite images on summer months in 1987, 1997 and 2007 in time frames. The finding of this study found that a reduction of natural land cover and an increase of artificial land cover serves as a disadvantageous factor for cold air creation and flowing and strikingly lowers the amount and height of cold air in the downtown area. It seemed that the cold air creation and flowing functions are influenced by land cover. In order to steadily create cold air and secure its flowing, it is thought that urban development or urban regeneration should be implemented by analysing the characteristics of the space surrounding the city. By doing so, a pleasant and healthy city could be formed.

• Weed & Turfgrass Science
• /
• v.2 no.1
• /
• pp.30-37
• /
• 2013

The objective of this research was to understand herbicidal activity of essential oils isolated from leaves of pine (Pinus densiflora), nut pine (Pinus koraiensis), larch (Larix kaempferi) and khingan fir (Abies nephrolepsis) in Korea. In a seed bioassay, essential oils of nut pine, larch and khingan fir inhibited the growth of rapeseed (Brassica napus) seedlings by 50% at 4,766, 1,865, $5,934{\mu}g\;ml^{-1}$, respectively, however, that of pine did not show any herbicidal effect. In a green house experiment, fall panicum, Southern crabgrass, sorghum, barnyardgrass, quackgrass, black nightshade, Indian jointvetch, velvet leaf, and Japanese morningglory were controlled in 24 hours by the foliar application of 10% essential oils from pine, nut pine, larch and khingan fir. The treated plant parts showed burndown effect, however, new shoots appeared 3 days after treatment. Results of GC-MS analysis showed that essential oils from pine, nut pine, larch and khingan fir contained 16, 25, 25, and 16 compounds, respectively, with hydrocarbons, alcohols, ketones, and esters. The major compounds of the essential oils were 3-carene, bornyl acetate, camphene, limonene, ${\alpha}$-pinene, ${\beta}$-pinene and ${\beta}$-phellandrene.

• Clean Technology
• /
• v.21 no.3
• /
• pp.164-170
• /
• 2015

In this study, polysulfone-Escherichia coli biomass composite fiber (PSBF) was prepared by spinning the suspension of PS and E. coli biomass and amine-methylated PSBF (AM-PSBF) was fabricated through the methylation of amine groups in PSBF. As comparing the adsorption characteristics of basic dye, Basic Blue 3 (BB3) by the PSBF and AM-PSBF, the effect of the methylation of amine groups on BB3 adsorption was confirmed. pH edge experiments showed that the BB3 uptake of PSBF and AM-PSBF increased as pH was increased and the BB3 uptake of AM-PSBF was higher than that of PSBF at the same pH. Both of PSBF and AM-PSBF was reached at equilibrium within 5 h and kinetic experimental data were well fitted by the pseudo-first-order kinetic model. By the Langmuir model, the maximum adsorption capacities of PSBF and AM-PSBF at pH 8 were evaluated to be 28.9 and 20.7 mg/g, respectively. The maximum adsorption capacity of AM-PSBF was enhanced 1.4 times comparing that of PSBF. These results indicate that the methylation of amine groups in PSBF leads to the improvement of BB3 adsorption capacity. In addition, the results of desorption experiments revealed that AM-PSBF was repeatedly reusable.