• Membrane Journal
• /
• v.17 no.3
• /
• pp.210-218
• /
• 2007

CEDI-BPM(Continuous Electrodeionization-Bipolar Membrane) has advantages due to high ion permselectivity through ion exchange membranes and the production of $H^+$ and $OH^-$ ions on the bipolar membrane surfaces for regeneration of ion exchange resin during electrodeionization operation. In this study, hardness materials were removed by the CEDI-BPM without scale formation and the ion exchange resins were electrically regenerated during the operation. The adsorption characteristic of ion exchange resin surface, the influence of flow rate on the hardness removal and electric regeneration were investigated in the study. The removal efficiency of Ca was higher than that of Mg in the CEDI-BPM, which was related to the high adsorption capacity of Ca on the cation exchange resin. With increasing flow rate, the flux of Ca and Mg was enhanced by the permselectivity of a cation exchange membrane. In the electric regeneration of CEDI-BPM, it was shown that the regeneration efficiency was higher with a lower regeneration potential applied between cathode and anode.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2005.10a
• /
• pp.97-106
• /
• 2005

현재 우리나라에서만 연간 약 26만들이 발생되고 있는 농업용 폐비닐은 재생원료로 재활용되어지면 국내외에서 그 용도가 매우 많으나 멀칭용으로 사용되었던 폐비닐은 그 오염도가 워낙 심하여 쉽게 재활용할 수 없는 처지이다. 즉 공급과 수요는 많으나 재생기술의 한계가 병목으로 작용하고 있는 현실이다. 따라서 간단하고 경제적인 방법으로 재활용할 수 있는 습식 및 건식 재생기술의 개발이 계속되어 요구되어 왔다. 강제 세척, 회전분리, 열풍 건조 및 압착성형을 이용한 새로운 간이습식공정을 통하여 멀칭용 농업용 폐비닐을 순도 95% 이상의 탄화 및 열화가 적은 압착 펠렛을 경제적으로 제조할 수 있었다. 이들의 재생 수지는 인장강도 $168.6{\pm}3.9kgf/cm^2$, 파단신을 315.8%, 인장탄성을 $2,551.8{\pm}50.1kgf/cm^2$, 굴곡강도와 굴곡탄성을 $166.7{\pm}7.4kgf/cm^2,\;5,716.2{\pm}242.2kgf/cm^2$ 그리고 충격강도는 $49.2kgf\;cm/cm$을 각각 보여 연질수지로써 기능하기 위한 충분한 성능을 보유하고 있음을 알 수 있었다. 또한 이들의 응용분야 확대를 위하여 fly ash 및 탄산칼슘을 배합하여 이들의 물성변화를 살폈다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.439-444
• /
• 2002

PET(Polyethylene terephthalate)수지는 engineering plastic으로서 film, 각종 용기 등의 소재로 널리 사용되고 있다 특히 PET의 투명성, 위생성, 내약품성, 우수한 기체 차단성, 내열성 등 우수한 물성을 이용한 음료용 PET bottle은 식음료 산업의 발전에 따라 그 사용량이 크게 증가하여 발생되는 폐기물 발생량 또한 사회문제로 대두되고 있으나 가공성의 문제로 재생원료로서의 이용이 미비한 실정이다.(중략)

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.59.2-59.2
• /
• 2010

결정형 태양 전지의 보급화를 위하여 고순도 실리콘을 저렴하게 제조할 수 있는 기술 개발이 필요하다. 본 연구에서는 고순도 실리콘을 경제적으로 제조하기 위하여 대역 정제에 의한 일방향성 응고법을 이용한 정련 연구를 진행하였으며, 응고 속도와 고 액상의 온도 구배가 정련도에 미치는 영향을 분석 하였다. 본 실험에 사용된 일방향 응고장치는 실리콘 용탕이 장입된 도가니 하부의 열 교환기를 통한 냉각에 의해 용탕 하부에서 상부 방향으로의 일방향성 응고가 진행되며, 응고 진행시 용탕의 흔들림에 의한 정련능의 감소를 방지하기 위해 가열 영역이 이동하는 Stober 공정을 채택하였다. 가열 영역은 실리콘 용융을 위한 상부 가열 영역과 응고 진행시 응고부의 온도 제어를 위한 하부 가열 영역으로 구성되어 있으며, 두 가열 영역의 온도 제어를 통해 응고중인 실리콘의 고 액상의 온도 구배를 조절하였다. 일방향 응고에 의한 정련법에서 고 액상의 온도 구배가 증가할수록 2차 수지상의 발달이 감소하고, 주상정의 수지상 형태를 유지하게 되어 고 액 공존영역에서 액상 영역으로의 확산이 원활하게 이루어져 분배계수를 이용한 정련도가 좋아지게 되며, ICP 분석을 통해 온도 구배의 증가에 따라 정련능이 증가하는 양상을 확인 할 수 있었다. 고 액상의 온도 구배의 조절을 통한 공정 시간 대비 정련도의 향상을 통해 결정형 태양전지의 생산성의 증가를 통한 저가화를 이룰 수 있을 것이다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.4
• /
• pp.137-142
• /
• 2018

Recycled synthetic resin materials produced from waste vinyl and waste plastic contain many foreign substances. Plastic products made from this recycled resin materials containing foreign substances are of poor quality, with reduced the strength and rigidity. Foreign substances include heavy metals, cement, foil, dyed paper and dust. In this study, the scratch-Dies process; which remove foreign sbustances, with precision and automation, through a three-stage mesh filter, is designed. The process is evaluated with finite element analysis according to vibration loading and make. After installing the manufactured equipment, recycled resin was producde, and its heavy metal content was evaluated. Recycled synthetic resin materials were also used plastic products and evaluate their strength. In addition, the change in production was assessed.

• Resources Recycling
• /
• v.6 no.2
• /
• pp.47-59
• /
• 1997

Thc paper points oul ever increasing amounts of plastics used in dex, clopmg countries and the prohlelns associated with such increase. Tl~e current status of the production and usc of plaslic materials is reviewed. Also reviewed lncludc thc pahcicies and gu~dclmcs canccrning the treatment of used plastics which have already bccn mstitutcd.

• Journal of Soil and Groundwater Environment
• /
• v.8 no.1
• /
• pp.17-26
• /
• 2003

The sorption experiment of cobalt was performed after the TRIGA soil was intentionally contaminated with cobalt was found that the sorption equilibrium coeficiency of soil decontamination was high when the ratio of soil mass to the volume of citric acid becomes 1:5 The TRIGA soil contaminated with 0.01 M, 0.001 M, and 0.0001 M of cobalt solution were decontaiminated with 0.01 M citric acid. The cobalt concentrtion in the wastewater were measured to be correspondingly 36.0, 14.0, 1.5 ppm. The results of wastewater recycling experiment by chemical precipitation method revealed that corresponding cobalt removal efficiency were 97% 88%. It was shown that the removal efficiency decreases as the cobalt concentration in the wastewater decreases. During the decontamination experiment, a lot of NaOH had to be added, and the volume of final solid waste reached almost 10% of that of the contaminated soil. The result of wastewater recyling experiment by ion exchange resin meted rethod revealed that to more the strong acid resins are used, the higher the cobalt removal efficiency becomes and the cobalt removal efficiency becomes and the lower the pH of recycling wastewater become. In order to obtain more than 95% removal efficiency, more than 0.625 g of strong acid resin was necessary in each of 3 experiments. There was an unexpected problem that a lot of strong acid resin waste was produced which amounts to 9.2% (volume) of the contaminated soil.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.65-71
• /
• 2018

Paper packs, glass bottles, metal cans, and plastic materials are classified according to packaging material recycling groups that are Extended Producer Responsibility (EPR). In the case of waste paper pack, the compressed cartons are dissociated to separate polyethylene films and other foreign substance, and then these are washed, pulverized and dried to produce toilet paper. Glass bottle for recycling is provided to the bottle manufacturers after the process of collecting the waste glass bottle, removing the foreign substance, sorting by color, crushing, raw materializing process. Waste glass recycling technology of Korea is largely manual, except for removal of metal components and low specific gravity materials. Metal can is classified into iron and aluminum cans through an automatic sorting machine, compressed, and reproduced as iron and aluminum through a blast furnace. In the case of composite plastic material, the selected compressed product is crushed and then recycled through melt molding and refined products are produced through solid fuel manufacturing steps through emulsification and compression molding through pyrolysis. In the recycling process of paper packs, glass bottles, metal cans, and plastic materials, the influx of recycled materials and other substances interferes with the recycling process and increases the recycling cost and time. Therefore, the government needs to improve the legal system which is necessary to use materials and structure that are easy to recycle from the design stage of products or packaging materials.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.35-39
• /
• 2015

Continuous adsorption and recovery characteristics for gold and lead-cyanide complexes in industrial wastewater were investigated by the Dowex 21K XLT resin. The Dowex 21K XLT resin could continuously remove over 95% for gold-cyanide complex until 520 bed volumes at the 0.5 mL/min of influent flow rate, however, could not remove lead-cyanide complex at all. The 96% of gold-cyanide complex adsorbed onto Dowex 21K XLT resin could be recovered by mixed solvent with HCl and acetone (7:3 ratio) within 8 bed volumes. Also, the bed volume for gold-cyanide complex using secondly reused Dowex 21K XLT resin was maintained as the 490, therefore, continuous process using Dowex 21K XLT resin can be sufficiently applied to the industrial wastewater containing gold ions.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.1
• /
• pp.24-30
• /
• 2015

To desalinate the aqueous solutions with high salt concentration using the capacitive deionization technology, two resin/membrane capacitive deionization(RMCDI) cells were fabricated by filling mixed ion exchange resins in two different flow channels (spacer and spiral type). The salt removal efficiency of the spacer- and spiral-RMCDI was 77.21 and 99.94%, respectively. Many ions were significantly removed in a spiral RMCDI cell because the feed solution could be more evenly contacted with the ion exchange resins filled on the spiral type flow channel. As the result of the changes of pH and accumulative charges, it was observed that Faradaic reaction was diminished for a spiral RMCDI cell filled by the mixture of cation and anion exchange resins. Therefore, the desalination of the aqueous solutions with high salt concentration by the capacitive deionization technology was proven. In addition, further studies on the optimization of the mixing ratio with ion exchange resins and the introduction of the regeneration process generally occurred in the continuous electrodeionization (CEDI) technology are required to improve the RMCDI technology.