• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.105-105
• /
• 2019

보나 여수로와 같은 수공구조물의 주변에서 발생하는 흐름 거동은 구조물 모서리에서 발생하는 흐름분리(flow separation)와 이에 따른 전단층(shear layer)과 재순환(recirculation) 흐름 영역의 발달 그리고 분리된 흐름의 재부착(reattachment)이 특징이다. 공학적으로 난류의 해석에 있어서 이러한 흐름 거동들을 정확하게 예측하는 것은 수공구조물 설계에 있어서 중요하다. 이 연구에서는 흐름 분리와 재순환 영역의 발달 그리고 흐름 재부착을 포함하는 후방계단(backward-facing step) 흐름을 155,000의 레이놀즈수 조건에서 하이브리드 RANS/LES 모델을 적용하여 해석결과를 평가한다. 하이브리드 모델로는 벽에 인접한 격자의 해상도에 상대적으로 민감하지 않은 SST(shear-stress transport) 난류 모델을 이용하는 DES(detached-eddy simulation) 기법을 적용하였다. 계단 높이가 h인 계산영역은 흐름방향 길이가 34h, 높이는 계단 상류와 하류에서 각각 1h와 2h 그리고 폭은 $2{\pi}$이다. 계단은 상류단으로부터 10h 하류부 지점에 위치한다. 경계조건으로 상부와 하부 벽면에 대해서는 비활조건을 적용한다. 상류부 수로에서 완전 발달한 흐름을 재현하기 위해서 유입경계조건은 유입부 하류 $2{\pi}h$ 지점에서 계산된 유속과 난류량을 매핑(mapping)기법을 이용하여 반복적으로 적용한다. 총 3.1백만개와 7.3백만개의 셀로 계산영역을 구현한 두 개의 계산격자 그리고 약 3.1백만개의 셀을 이용했지만 벽면 근처에서의 격자 구성을 다른 방식으로 설정한 두 가지 격자를 이용하여 격자 해상도가 DES 수치해석 결과에 미치는 영향을 분석하였다. 수치해석결과는 본 연구에서 상류단 조건으로 적용한 매핑기법이 대상 수로에서 완전 발달한 흐름을 잘 재현함을 보여주며, 합리적인 DES 해석 결과를 얻기 위해서는 벽에 수직한 방향으로 적절한 격자의 해상도와 분포가 필요함을 보여준다.

• Proceedings of the KSME Conference
• /
• 2001.11b
• /
• pp.312-317
• /
• 2001

Modifying effects of the rectangular forward step for suppressing the unsteady pressure fluctuation during interaction between the upstream vortical flow with the edge are studied numerically. The vortical flow is modeled by a point vortex, and the unsteady pressure coefficient is obtained from the velocity and the potential field. To investigate the effects of the edge shape the rectangular forward step is chamfered with various angles. Calculation show that the pressure peaks become decreased by increasing the vortex height as well as the chamfering angle. The pressure amplitudes are very sensitive to the change of the initial vortex height. From this study we can find out that the chamfered edge has two effects; the one is that it suppresses the pressure amplitude generated from the edge, and the other is that it decreases the time variation of unsteady pressure fluctuation. These modifying concepts can be applied to attenuate the self-sustained oscillation mechanism at the open cavity flow.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.3
• /
• pp.213-220
• /
• 2002

Modifying effects of the rectangular forward step for suppressing the unsteady pressure fluctuation during interaction between the upstream vortical flow and the edge are studied numerically. The vertical flow is modeled by a point vortex, and the unsteady pressure coefficient is obtained from the velocity and the potential fields. To investigate the effects of the edge shape the rectangular forward step is chamfered wish various angles. Calculation shows that the pressure peaks become decreased by increasing the vortex height as well as the chamfering angle. The pressure amplitudes are very sensitive to the change of the initial vertex height and its strength. From this study we can find out that the chamfered edge has two effects; the one is that it suppresses the pressure amplitude generated from the edge, and the other is that it decreases the time variation of unsteady pressure fluctuation. These modifying concepts can be applied to attenuate the self-sustained oscillation mechanism at the open cavity flow.

• Journal of Korea Water Resources Association
• /
• v.55 no.2
• /
• pp.147-157
• /
• 2022

The backward-facing step (BFS) is a benchmark geometry for analyzing flow separation occurred at the edge and resulting development of shear layer and recirculation zone that are occupied by turbulent flow. It is important to accurately reproduce and analyze the mean flow and turbulence statistics of such flows to design physically stable and performance assurance structure. We carried out 3D RANS computations with widely used, two representative turbulence models, k-ω SST and RNG k-ε, to reproduce BFS flow at the Reynolds number of 23,000 and the Froude number of 0.22. The performance of RANS computations is evaluated by comparing numerical results with an experimental measurement. Both RANS computations with two turbulence models appear to reasonably well reproduce mean flow in the shear layer and recirculation zone, while RNG k-ε computation results in about 5% larger velocity between the outer edge of boundary layer and the free surface above the recirculation zone than k-ω SST computation and experiment. Both turbulence models underestimate the shear stress distribution experimentally observed just downstream of the sharp edge of BFS, while shear stresses computed in the boundary layer downstream of reattachment point are agree reasonably well with experimental measurement. RNG k-ε modeling reproduces better shear stress distribution along the bottom boundary layer, but overestimates shear shear stress in the approaching boundary layer and above the bottom boundary layer downstream of the BFS.

• 보존과학연구
• /
• s.35
• /
• pp.121-127
• /
• 2014

The Vietnam homecoming box that has been collected in National Museum of Korean The Vietnam homecoming box that has been collected in National Museum of Korean Contemporary History got severely damaged such as rot, attached foreign substance, fading, color, wood decay. In particular, the bottom of the box was unstable state that deteriorated by pests and the left strut was severely damaged by some deep cracks and pests. The metal bands were remained on the side and bottom of the box, and all the bands were seriously corroded. On the bottom-right of the lid, black foreign matter was adhered to the surface. In the process of conservation treatments, the cleaning, filling cracks, reinforcing the bottom of the box, attaching the metal bands were proceed in order after the investigation of the state.

• Solar Energy
• /
• v.19 no.3
• /
• pp.29-41
• /
• 1999

Three-dimensional natural convective heat transfer in a vertical channel with a protruding single module was investigated experimentally. The particular interest was in the removal of thermal energy from the module by convective heat transfer. Hence radiative and conductive heat losses were estimated by using thermocouples and heat flux sensor respectively. The flow fields in the channel were visualized by means of a smoke-method. Also, local temperatures were measured by thermocouples inside the channel, along the vertical wall and module surface. It is found that convective heat transfer was promoted at the lower comer of the module and was decreased at the upper comer due to a recirculation zone. A general correlation of the critical channel ratios was found as a function of Rayleigh number. For the range of $8.28{\times}10^3<Ra^*_c<3.48{\times}10^6$, a useful correlation for the mean Nusselt number was proposed as a function of modified channel Rayleigh number.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.5
• /
• pp.367-375
• /
• 2017

RANS computational analysis was performed on the head of the launch vehicle including the hammerhead nose pairing in the supersonic regime. The two-dimensional axisymmetric analysis was performed by using laminar, fully turbulent and transition models and compared with the experimental data. It was observed that different flow phenomena occurred depending on the Reynolds number. Under the high Reynolds number condition, the boundary layer becomes turbulent, which is not separated from the surface of the launch vehicle. With the low Reynolds number condition, laminar separation bubble was produced due to the separation and reattachment of the boundary layer on the expansion-compression edge of the hammerhead type nose fairing. The three-dimensional computations with the angle of attack showed a fully detached vortical structure due to the laminar separation bubble. It is proved that the turbulent transition should be considered to predict the separation bubble with the Reynolds number.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.5
• /
• pp.260-268
• /
• 2017

In this study, wind characteristics of a shipping container were investigated through the wind tunnel test (high-frequency force balance test), and damage occurrence velocities of various containers with weights were evaluated based on results of the wind tunnel tests. As a result, mean wind force coefficients acting on containers in x-direction increased in the order of 12ft, 20ft, 40ft and 40ft high cube. On the other hand, mean wind force coefficients at y-direction increased in the order of 40ft high cube, 40ft, 20ft and 12ft. It was suggested that the shear layer separated from the corner of windward surface of the container is reattached on the sides of it, and then the mean wind force coefficient is weaker. As a result of the damage occurrence velocity on containers with weights, it was found that the probability of occurrence of sliding is higher rather than that of overturning. Further, the most unfavorable container was 40ft high cube, and the sliding and overturning occurrence velocities were 20.4 m/s and 26.8 m/s, respectively. Furthermore, the regression formula for sliding and overturing occurrence velocitys were proposed based on the results of relationship between weights of containers and damage occurrence velocities. These results are expected to be useful in establishing a guideline for external force estimation acting on container securing equipment and stacking way.