• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.243-247
• /
• 1999

We report the generation of inherently stable, high-speed, nearly transform-limited, optical pulses by chirped pulse compression, in which sinusoidally driven phase modulator generates frequency chirped pulses that are subsequently compressed by a dispersive optical fiber. Experimental results show that $sech^2$ shape pulses with a pulse width of ~14 ps and a time bandwidth product of ~0.34 are successfully generated at 10 GHz repetition rate. In contrast to other methods, such as higher order soliton compression, this approach does not depend on the optical power and thus shows promise for application to low-power lasers.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.34-37
• /
• 2001

In this paper the comparison of conventional PI control and nonlinear sliding mode control is presented for Switched Reluctance Motor(SRM). SRM drives require a nonlinear controller for high dynamic Performance but the high nonlinearity makes a poor performance in conventional PI control. However SRMs with sliding mode control achieve a robust performance for speed control. In this paper nonlinear sliding mode controller is suggested for high performance speed. State equation and modeling are proposed. And we present the speed comparison of PI control and SLMC.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.864-867
• /
• 2003

In this study, a controller which has a feedforward controller and two additional PI integrators was designed. But if a controller is used by only the integration of a feedforward controller and two additional PI integrators, the capability of a controller will decrease because the decoupling terms of current is feedback as the disturbance. Therefore the feedforward method with the decoupling compensation was proposed. The two additional PI integrators were replaced by two decoupling terms to simplify the calculation. The simulation and experimental using SynRM driving system were performed to verify the design of a improved decoupling feedforward controller.

• Tunnel and Underground Space
• /
• v.8 no.4
• /
• pp.342-350
• /
• 1998

In this study, fracture network in rock mass was interpreted using borehole wall images obtained by televiewer. The orientation and JRC value of major joint set were evaluated adopting image analysis techniques, of which process were written in macro-program code. As linking JRC to joint stiffness using Barton-Bandis model, fracture network map was produced for application to jointed rock modelling in numerical analysis of underground structure.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.89-96
• /
• 2003

In this paper, a CCSDS(Consultative Committee for Space Data Systems) telecommand(TC) decryptor for the security of geostationary communications satellite was implemented. For the confidentiality of CCSDS TC datalink security, Option-A which implements the security services below the transfer sublayer was selected. Also CFB(Cipher Feedback) operation mode of DES(Data Encryption Standard) was used for the encryption of 56-bit data bits in 64-bit codeblock. To verify Decryptor function, the DES CFB logic implemented on A54SX32 FPGA(Field Programmable Gate Array) was integrated with interface and control logics in a PCB(Printed Circuit Board). Using a function test PC, the encrypted codeblocks were generated, transferred into the decryptor, decrypted, and the decrypted codeblocks were transmitted to the function test PC, and then compared with the source codeblocks. Through LED(Light Emitting Diode) ON operation by driving the relay related to Op-code decoded and the comparison between the codeblock output waveforms measured and those simulated, the telecommand decryptor function was verified.

• Journal of Power System Engineering
• /
• v.15 no.1
• /
• pp.51-56
• /
• 2011

The various process parameters of thermal spray process affects on quality of Ni-based coatings. Thus, there is need to analyze the effect of process parameters on quality of Ni-based coatings. In this paper, the effects of process parameters on hardness and wear rate of Ni-based coatings were investigated using 4 design of experiments. First, the Ni-based coatings were fabricated according to $L_9(3^4)$ orthogonal array. The hardness tests and the wear tests were performed on the Ni-based coatings. The analysis of variance for the hardness and wear rate were carried out. As a results, the acetylene gas flow and the powder feed rate were identified as main factors effected on the hardness and the oxygen gas flow and the acetylene gas flow were identified as main factors effected on the wear rate. The full factorial experiments design with different levels was applied for investigation of effect of these main factors.

• The KSFM Journal of Fluid Machinery
• /
• v.14 no.6
• /
• pp.61-67
• /
• 2011

The study is to analyze the chemical and heat-flow reactions in the hydrogen generation unit(autothermal reformer), using computational numerical tools. Autothermal reformer(ATR) is involved in complex chemical reaction, mass and heat transfer due to exothermic and endothermic reactions. Therefore it is necessary to reveal the effects of various operation parameters and geometries on the ATR performance by using numerical analysis. Numerical analysis needs to dominant chemical reactions that includes Full Combustion(FC) reaction, Steam Reforming(SR) reaction, Water-Gas Shift(WGS) reaction and Direct Steam Reforming(DSR) reaction. The objective of the study is to improve theoretically the reformer design capability for the goal of high hydrogen production in the autothermal reformer using methane. Hydrogen production reached maximum in a certain value of Oxygen to Carbon Ratio(OCR) or Steam to Carbon Ratio(SCR). When the longitudinal distance to dimeter ratio(L/D) is increased, hydrogen production increases.

• Journal of the Korean Magnetics Society
• /
• v.5 no.5
• /
• pp.892-899
• /
• 1995

A numerical simulation program based on the finite elerrent method is developed for calculating electromagnetic field of the cylindrical electromagnetic pump. The calculated results by the developed program show that Lorentz forces show maximum peak at an optimum length ($L_c$) of the induction coil. The value of $L_c$ depends on the radius of the molten metal when the skin depth is large. On the other hand, the value of $L_c$ depends on the skin depth when it is small.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.7
• /
• pp.118-126
• /
• 2003

In this study, a battery charge and discharge regulator of modular type is designed as paralleled bi-directional converter that is possible to provide the power without failure not only in the steady state but also in the transient period by the step load variation or the unexpected faults among the converter modules. Each converter module is designed to get stability, performance, reliability, and maintainability and the average current mode method used for controller has the advantages such as noise immunity, fast response, and the real average current signal acquisition. The equivalent model and small signal model for the paralleled battery chargerIdischarger are presented, and also the transfer functions are analyzed for the CCM(Continuous Charge Mode), CDM(Continuous Discharge Mode) and DDM(Discontinuous Discharge Mode). The experiments of the paralleled bi-directional converter are carried out in the step load variation, and in faults of one converter module respectively. And the performance of paralleled bi-directional converter is verified via the experimental results.

• Proceedings of the Korean Quaternary Association Conference
• /
• 2004.11a
• /
• pp.4-13
• /
• 2004

제주도 북제주군 한림읍 협재리에는 대부분 탄산염퇴적물로 이루어진 해안사구가 분포하고 있다. 사구를 이루는 탄산염퇴적물은 연체동물과 홍조류의 조각이 약 80% 이상을 차지하며 그 외에 저서성 유공충, 성게류와 태선동물의 조각, 그리고 화산암편으로 이루어져 있어, 제주도에 분포하는 여러 탄산염 해빈퇴적물의 입자조성과 매우 유사한 경향을 나타낸다. 이러한 탄산염 입자들은 천해에 서식하던 해양생물들에 의해 생성되며, 그 각질이 해빈으로 운반되고 바람에 의해 재동되어 사구를 형성하였다. 특히 이 연구지역의 사구가 분포하는 지점에서 북쪽으로 약 1km 떨어져 있는 협재 해수욕장에는 현재에도 천해에서 생성된 많은 양의 탄산염 해빈퇴적물이 퇴적되어 있으며, 제주도의 타 지역에 비해 매우 빠른 북동${\sim}$북서방향의 바람이 불고 있어, 퇴적물을 해빈에서부터 사구형성지점으로 운반시키는 데 효과적인 역할을 했을 것으로 판단된다. 사구를 절개하여 그 단면을 관찰한 결과, 전반적으로 희미한 수평층리와 사층리가 발달하고 있으며, 그 외의 다른 뚜렷한 퇴적구조는 관찰되지 않는다. 퇴적물의 입자들은 주로 직경이 $0.27{\sim}0.40mm$로 중립질 모래에 해당한다. 이 크기의 입자들은 가장 침식이 잘 될 수 있는 입자크기에 해당하는 것으로 알려져 있으며, 따라서 해빈으로부터 퇴적물이 운반될 때에 특히 이 크기의 입자들이 차별적으로 더 많이 운반되었을 것이라고 생각된다. 또한 퇴적물 입자의 크기와 구성성분의 함량은 각 사구의 전 층준에서 크게 변화하지 않는 것으로 나타나며, 이는 사구가 형성되는 기간 동안 탄산염퇴적물을 운반한 바람의 세기가 어느 정도 일정하였음을 지시한다. 해안사구의 형성시기를 알아보기 위하여 사구의 기반을 이루는 고토양층과 사구 최하부와 최상부의 탄산염퇴적물에 대해 방사성탄소연대측정을 실시하였다. 그 결과, 사구의 형성시기를 지시하는 고토양의 연령은 $680{\sim}720\;BP\;(1,200{\sim}1,300\;AD)$로 측정되었으며, 사구를 이루는 탄산염퇴적물의 연령은 전 층준에서 모두 약 3,500 BP로 측정되었다. 따라서 약 3,500 BP에 천해에서 생성된 탄산염퇴적물이 해빈에 분포하다가 $1,200{\sim}1,300\;AD$에 바람에 의해 재동되고 현재의 위치에 쌓여 사구를 형성한 것이라고 해석할 수 있다. 사구가 형성되기 시작하던 시기는 전세계적으로 춥고 바람이 세었던 Little Ice Age ($1,300{\sim}1,820\;AD$)에 해당하며, 따라서 해빈에 분포하던 많은 양의 탄산염퇴적물이 이 시기에 집중적으로 운반된 것으로 사료된다.