• Korean Journal of Construction Engineering and Management
• /
• v.20 no.1
• /
• pp.96-104
• /
• 2019

Recently, projects are being actively promoted to develop a new residential district centered around the metropolitan area, or to redevelop the residential area that was established long ago as unplanned land development. In this residential area, the owner can directly construct the building, and the way the building owner builds the residential house is called the direct construction of the owner. If the owner has the construction management (CM) capability while conducting direct management of the owner, the direct construction can be carried out by the CM method. This type of construction is called Owner-CM delivery method. However, it is very rare for small-scale construction in Korea to be implemented by the Owner-CM method. This may be due to the lack of knowledge and experience about the CM of the owner. In this study, we investigated the actual cases of the scheduling for the residential houses of similar size which were built at the same time in the residential housing complex developed near the metropolitan area. The purpose of this study is to derive the success factors of the scheduling in the small-scale construction from the cases carried out by the Owner-CM method. These success factors of the scheduling can be used as meaningful reference for the owners who want to build their own house in the future.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.21 no.4
• /
• pp.26-49
• /
• 2018

The purpose of this study was to verify the reliability of the solar radiation model and discuss its applicability to the urban area of Seoul for summer heat stress mitigation. We extended the study area closer to the city scale and enhanced the spatial resolution sufficiently to determine pedestrian-level urban radiance. The domain was a $4km^2$ residential area with high-rise building sites. Radiance modelling (SOLWEIG) was performed with LiDAR (Light Detection and Ranging)-based detailed geomorphological land cover shape. The radiance model was evaluated using surface energy balance (SEB) observations. The model showed the highest accuracy on a clear day in summer. When the mean radiation temperature (MRT) was simulated, the highest value was for a low-rise building area and road surface with a low shadow effect. On the other hand, for high-rise buildings and vegetated areas, the effect of shadows was large and showed a relatively low value of mean radiation temperature. The method proposed in this study exhibits high reliability for the management of heat stress in urban areas at pedestrian height. It is applicable for many urban micro-climate management functions related to natural and artificial urban settings; for example, when a new urban infrastructure is planned.

• Journal of the Korean Society of Earth Science Education
• /
• v.11 no.3
• /
• pp.158-171
• /
• 2018

The purpose of this research was to examine the attitudes toward science on geology and satisfaction of education according to the stage of cognitive development of middle school students mainly on the geoscience education program of IS-GEO(International School for Geoscience and Mineral Resources) which is the KIGAM(Korea Institute of Geoscience and Mineral Resources) and to see what kind of correlation it shows between these. The subjects of research are 139 out of 282 students who participated in the geoscience education program conducted at the IS-GEO which is a KIGAM in 2018 by random sampling. Therefore, the research results are as follows. First, the concrete operational stage was 44%, the transition stage was 32%, the formal operational stage was 24%, 76% of the middle school student's cognitive development level didn't reach at the formal operational stage. Also, attitudes towards science on geology indicated statistically significant differences in the sub-region in "Geology-related science class", "Suburban geological science class", "Recognition of geological science and technology". Second, there was no statistically significant difference in educational satisfaction depending on the stages of every cognitive development. In other words, all participants at the cognitive stages showed high satisfaction with the geological education program which progresses at the IS-GEO, which is the KIGAM. Third, the correlation between educational satisfaction and attitudes toward science on geology showed a statistically meaningful static correlation. Therefore, attitudes toward science on geology can be positively displayed that participants who participated in geoscience education program and training of the IS-GEO have high satisfaction of education in science behavioral system.

• Korean Journal of Environment and Ecology
• /
• v.35 no.6
• /
• pp.659-668
• /
• 2021

The purpose of this study is to propose a ventilation corridor management plan to improve the thermal environment for Busan Metropolitan City. To this end, the characteristics of hot and cool spots in Busan were identified by conducting spatial statistical analysis, and thermal image data from Landsat-7 satellites and major ventilation corridors were analyzed through WRF meteorological simulation. The results showed the areas requiring thermal environment improvement among hot spot areas were Busanjin-gu, Dongnae-gu, industrial areas in Yeonje-gu and Sasang-gu, and Busan Port piers in large-scale facilities. The main ventilation corridor was identified as Geumjeongsan Mountain-Baekyangsan Mountain-Gudeoksan Mountain Valley. Based on the results, the ventilation corridor management strategy is suggested as follows. Industrial facilities and the Busan Port area are factors that increase the air temperature and worsen the thermal environment of the surrounding area. Therefore, urban and architectural plans are required to reduce the facility's temperature and consider the ventilation corridor. Areas requiring ventilation corridor management were Mandeok-dong and Sajik-dong, and they should be managed to prevent further damage to the forests. Since large-scale, high-rise apartment complexes in areas adjacent to forests interfere with the flow of cold and fresh air generated by forests, the construction of high-rise apartment complexes near Geumjeongsan Mountain with the new redevelopment of Type 3 general residential area should be avoided. It is expected that the results of this study can be used as basic data for urban planning and environmental planning in response to climate change in Busan Metropolitan City.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.2
• /
• pp.42-54
• /
• 2023

The population is concentrated in the metropolitan areas in Korea, and low-density residential areas are transforming into high density residential areas through redevelopment to meet this demand. However, large-scale redevelopment in a short period of time has a negative impact on the urban climate, such as generating a heat island effect due to the reduction of urban green areas. In this study, the change in surface temperature from 2013 to 2022 in the redevelpment areas of Godeok-dong and Dunchon-dong, Gangdong-gu, Seoul, was analyzed using Landsat 8 satellite images. In the Godeok-dong area, the difference in surface temperature was analyzed for the target redevelopment area, forest area, mixed forest and urban area, and low density residential area. In the Dunchon-dong area, the difference in surface temperature was analyzed for the target redevelopment area, forest area, and low density residential area. The difference in surface temperature was analyzed through multiple regression analysis conducted yearly over the three different stages in redevelopment period. The results from the multiple regression analysis show that in both areas, the land surface temperature of target redevelopment area was higher than that of the forest area and lower than low density residential area. It can be seen that these results occurred because the low-density residential area in Godeok-dong and Dunchon-dong had a lower green area ratio and a higher building-to-land ratio than the target redevelopment area. The results of this study suggest that even if low-density residential areas are transforming into high-density areas, adjusting the management of green areas and building-to-land ratio can contribute to lessen urban heat island effect.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.312-312
• /
• 2023

동진강 유역은 김제평야를 품고 있어 다른 지역에 비해 농지면적이 차지하는 비중이 크며, 이에 따라 전체 용수 사용량에서 농업용수의 비중이 절대적으로 높은 유역이다. 낙양 보는 동진강 중·상류에 위치한 이수시설로 상류에 위치한 섬진강댐과 같이 동진강 유역의 농업용수 공급에 중요한 역할을 하고 있다. 낙양 보는 현재 동진강 방수문 4문, 김제간선 취입수문 2문, 정읍간선 취입수문 1문이 설치되어 있다. 관개기에는 동진강 도수로의 수문을 폐쇄하여 동진강 본류로의 하천유지용수를 차단하고 김제 배수로의 수문을 운용하여 농업용수를 공급하고 있으며 수혜구역의 용수수요 변화 및 기상상황, 하천상황에 따라 탄력적으로 운영하고 있다. 이러한 가동 보 운영으로 인하여 다양한 수위-유량관계의 변동성이 발생한다. 본 연구에서는 가동 보 운영에 따른 수위-유량관계 곡선식의 변동성을 확인하기 위해 동진강 유역 낙양보 상류에 위치한 정읍시(거산교)관측소를 대상관측소로 선정하였다. 정읍시(거산교)관측소는 2012년에 개발된 수위-유량관계곡선을 2021년까지 사용하였고, 2022년 수위-유량관계곡선식 검증과 재개발을 위하여 유량측정을 실시하였다. 2012년에 개발된 수위-유량관계곡선은 검토 결과 강우에 의한 수위 상승시 보 완전 개방 상태의 측정성과를 확보하여 수위-유량관계 곡선식을 개발하였다. 그 결과 가동 보를 운영하는 3월~9월은 상류에 위치한 정읍시(행정교)관측소와 상하류 역전 현상이 발생하였고, 매년 비정상적인 유량이 산정되는 결과를 초래하였다. 2022년 신뢰도 높은 유량자료와 수위-유량관계곡선식 개발을 위해 낙양 보 완전개방 및 부분개방에 따른 다양한 유량측정성과와 낙양 보 수문 모니터링 결과를 확보하였다. 낙양 보는 2022년 1월~3월, 10월~12월은 수문 6문을 완전 개방하여 동진강에 하천유지용수를 공급하고, 4월부터 동진강 방수문을 폐쇄하여 농번기 농업용수를 확보한 후, 5월~9월에 확보된 농용수를 김제 배수문 2문을 부분개방하면서 공급하는 방식이다. 이 기간동안 낙양 보 수문에 대한 모니터링을 위해 정읍시(거산교)관측소 수위자료에 대한 검토를 실시하였으며, 유량측정시에는 정확한 유량측정성과와 곡선식 확인을 위하여 동일한 위치에서 측정을 수행하였다. 또한, 수위 또는 유량이 변하는 구간은 연속측정을 실시하였으며, 모니터링 결과와 유량측정성과를 바탕으로 수위-유량관계 변화를 분석하였다. 그 결과 저수위1식은 수문 완전개방, 저수위2식은 수문 완전폐쇄, 저수위3~6식은 수문 부분개방 곡선식을 개발하였으며, 저수위 구간은 낙양보 운영에 따라 총 27차례 기간분리가 발생하였다. 결과적으로 본 연구에서는 낙양 보 운영에 따른 다수의 유량측정성과와 모니터링 자료를 확보하였으며, 확보한 유량측정성과의 분석을 통한 신뢰도 높은 수위-유량관계곡선식을 개발하였고 이를 통해 생산된 유량자료는 정확도가 매우 높은 것으로 분석되었다.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.3
• /
• pp.87-95
• /
• 2023

Recently, redevelopment of the original downtown area is underway, the necessity of construction in adjacent location is increasing. However, excavations in dense urban areas are prone to ground problems due to various causes, so it is necessary to use materials and methods that can minimize such problems. As a general earth retaining method, various methods such as diaphragm wall and CIP method are applied using cement. However, since a large amount of cement is used for the installation of earth retaining method, it is necessary to conduct research on the development of new cement substitute materials to significantly reduce greenhouse gas emissions. In this study, we utilized the hardening reaction of blast furnace slag powder, desulfurized gypsum and high calcium fly ash by alkali activation and applied it to the SCW method. As a result, it was analyzed that the compressive strength of solidified soil using development solidification material was 96.2 ~ 106.3% of OPC at 28 days of curing. In addition, the strength increment ratio was 2.06 for sandy soil and 2.41 for clayey soil, which was higher than 1.85 of OPC. It seems an advantageous in terms of long-term strength. In addition, from the environmental point of view, it was analyzed that there is no elution of heavy metals and that greenhouse gas emissions can be dramatically reduced. Therefore, if further studies are conducted, it can be applied to the SCW method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.4
• /
• pp.493-499
• /
• 2023

Recently, with the development of construction machinery, low-vibration construction machine such as Tricone-Bits, which can drill both soil and rock layers and minimize vibration, is being used frequently. However, although many studies have been conducted on the prediction of vibration values for earth augers and pile drivers, the reality is that studies on the effects of vibration on low-vibration drilling equipment are lacking. In this paper, ground vibration values for Tricone-Bits were measured, and a vibration distance damping formula was proposed using this. In addition, after predicting the vibration of the earth auger and pile driver using the previously proposed vibration distance damping formula, the degree of vibration damping for the Tricone-Bits was evaluated by comparing and analyzing it. As a result, the Tricone-Bits showed a vibration reduction effect of 97% and 93% compared to these machine and It will help with management and prediction of the ground vibration effects evaluation on the low-vibration equipment such as Tricone-Bits.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.1C
• /
• pp.37-44
• /
• 2010

Recently, urban retrofit and extension, development of new buildings and facilities, and construction of underground structures like subway tunnels in urban areas give rise to significance of site investigation at urban areas. However, ambient electric noises, traffic vibrations, embedded objects work as obstacles to high-quality and accuracy in site investigation at urban areas. In this paper, a new technique called the pseudo-DC resistivity survey (in brief, PDC-R) was proposed to minimize the adverse effect of ambient electrical noises in resistivity survey. PDC-R technique utilizes an AC current with frequency range of 0.1 to 1.0 Hz rather than DC current, which is used for conventional resistivity survey. The motivation of using low-frequency AC current is to avoid 60-Hz components or its multiples in the resistivity survey which ambient noises are mostly composed of. The implementation of PDC-R technique also included the parametric study on skin effect, frequency effect and current-level effect, which led to the determination of optimal values of frequency and current level for PDC-R survey. The reliability and feasibility of PDC-R technique was verified through field tests, accompanied by the comparison with DC resistivity survey and CapSASW tests.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.1
• /
• pp.63-71
• /
• 2024

Through the development of construction technology, various construction projects such as redevelopment projects, undergrounding of roads, expansion of subways, and metro railways are being carried out. However, this has led to an increase in the number of construction projects in existing urban centers and neighborhoods, resulting in an increase in the number of damages and disputes between neighboring buildings and residents, as well as an increase in safety accidents due to the aging of existing buildings. In this study, digital data was applied to a graphics program to objectify the progress of cracks by comparing the creation of cracks and the increase in length and width through photographic images and presenting the degree of cracks numerically. Through the application of the program, the error caused by the subjective judgment of crack change, which was mentioned as a shortcoming of the existing field survey, was solved. It is expected that the program can be used universally in the building diagnosis process by improving its reliability if supplemented and improved in the process of use. As a follow-up study, it is necessary to apply the extraction algorithm of the digital graphic data program to calculate the length and width of the crack by itself without human intervention in the preprocessing work and to check the overall change of the building.