• Journal of Navigation and Port Research
• /
• v.46 no.1
• /
• pp.33-41
• /
• 2022

An important operational goal of a container terminal is to maximize the efficiency of the operation of quay cranes (QCs) that load and/or unload containers onto and from vessels. While the maximization of the efficiency of the QC operation requires minimizing the delay of yard tractors (YT) that transport containers between the storage yard and QCs, the delay is often inevitable because of traffic congestion. In this paper, we propose a method for learning a model that predicts traffic speed in a terminal using only YT operation data, even though the YT traffic is mixed with that of external trucks. Without any information on external truck traffic, we could still make a reasonable traffic forecast because the YT operation data contains information on the YT routes in the near future. The results of simulation experiments showed that the model learned by the proposed method could predict traffic speed with significant accuracy.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.344-344
• /
• 2020

기후변화 가속화와 국민의 높아진 서비스 요구 수준에 따라 농업용수의 관리방식을 현장인력의 경험적 물관리 방식에서 계측정보 기반의 과락적 물관리 방식으로 전환의 필요성이 대두되어, 2001년부터 농업기반시설 내 무인계측, 원격제어 기능이 탑재된 물관리자동화 시스템을 보급하는 농업용수관리자동화사업을 시행하였다. 농업용수관리자동화사업은 사업시행 초기 연구 결과, 농업기반시설 무인계측 및 원격제어 시스템 보급으로 인력에 의한 관행적 물관리 대비 수리시설의 관리 효율성이 크게 향상되어 유지관리 인력의 절감 및 용수수급의 적정성이 개선될 것으로 분석되었다. 하지만 영농환경의 변화에 따라, 당초 분석결과와 달리 자동화사업 추진과 한국농어촌공사의 유지관리 인력 규모 간 뚜렷한 상관성이 보이지 않는다는 정책기관의 지적이 발생하고 있다. 현재 4차산업기술이 산업 전 분야에 걸쳐 일어나고 있으며 농업분야에도 ICT, LOT, 빅데이터 기술이 도입되어 새로운 가치를 창출하고 있다. 농업용수관리 분야에 있어서는 데이터를 활요한 수요자 중심의 지능형 물관리 사업이 추진되고 있으며, 일정규모 이상 저수지 및 양수장 농업용수 공급량 측정 계측기의 설치가 추진중에 있다. 그러나 현재까지 이러한 설치된 계측장치들의 활용방안에 대해서는 뚜렷한 결과가 도축된 바 없으며, 현재 많은 예산과 인력이 투입되어 설치·운영되고 있는 계측장치들의 활용 방안에 대해서 연구가 필요한 실정이다. 2018년 2,228개 농업기반시설물에 자동화시스템을 설치 완료 하였으나, 각종 장비의 비표준화, 효과대비 고비용, 잦은 통신두절 등의 기술적 문제로 인해 현업부서의 수자원관리 업무에서 자동화시스템의 활용성이 저조한 것으로 관측됐다. 본연구에서는 국내 수자원 계측제어 기술 동향 및 운영환경 조사 결과를 기초로, 기술적 측면의 농업용수관리자동화사업의 개선사항과 4차 산업기술의 농업용수관리자동화사업의 적용방안을 제시 하여 농업용수관리자동화사업 중장기 계획 개정등 향후 정챡수립시 참고 자료로의 활용과 농업용수 효율적 활용과 관리를 위한 TM/TC 미래추진 방안을 제시로 정확하고 신뢰도 높은 농업용수 관리 체계를 구축 하고자 한다.

• Korean Journal of Cleft Lip And Palate
• /
• v.8 no.2
• /
• pp.63-70
• /
• 2005

Patients with cleft lip and palate usually show up maxillary hypoplasia. In these cases, a large amount of maxillary advancement is often needed to correct the severe deformity, but local soft-tissue scars around the maxilla restrict maxillary advancement and increase the relapse rate. Maxillary distraction osteogenesis is an effective method for facial and occlusal improvement in these patients. By gradually lengthening both the bones and the soft tissues, distracted midface can greatly increase postoperative stability and decrease the relapse rate. However, the maxillary extraoral appliances of the early days used were esthetically unappealing as well as difficult for the patient to manage. Recently, more inconspicuous intraoral distraction appliances have been developed and used with success. We acquired favorable result in two patients(bilateral 1 patient and unilateral 1 patient) with severe maxillary hypoplasia secondary to complete cleft lip and palate were treated with midface distraction using internal distractor (Zurich Pediatric Maxillary Distractor, KLS Martin, Tuttlingen, Germany). So, we report our experience with literatures.

• Journal of Technology Innovation
• /
• v.22 no.4
• /
• pp.145-164
• /
• 2014

Nuclear fusion is one of the most promising options for generating large amounts of carbon-free energy in the future. Major countries such as China, EU, and Japan have established a national plan for DEMO construction and they are implementing it. Korea has started a nuclear fusion research and development by the KSTAR project started in 1995. There are matured needs for a full-scale research and development initiatives to ensure competition with the major countries for DEMO as well as achieve the final goal to commercialize fusion energy. In this paper, we apply the TRL and AHP methods in order to identify the key technologies to conduct DEMO R&D. We propose the priorities of future R&D on DEMO by deriving a core technology in the field. At first, we review the scientific theory of fusion and trend of progress of DEMO activities in major countries. For previous studies, we review TRL and AHP methods to examine the technology classification system of DEMO and identify key technologies. We apply TRL method to identify readiness level of DEMO technologies and AHP to compensate shortcoming of TRL. The key technologies of DEMO to be secured from a synthesis result of the TRL and AHP are burning plasma, plasma facing material, structural material, high frequency heating, neutral particle beam, safety, plasma diagnostic, and simulation technologies.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.53-53
• /
• 1999

전계방출을 이용한 평판 표시장치는 CRT가 가진 장점을 모두 갖는 동시에 얇고 가벼우며 낮은 전력소모로 완벽한 색을 구현할 수 있는 차세대 표시장치로서 이에 대한 여국가 활발히 이루어지고 있다. 여기에 사용되는 음극물질로서 실리콘이나 몰리 등을 팁모양으로 제작하여 사용해 왔다. 하지만 잔류가스에 의한 역스퍼터링이나 화학적 반응에 의해서 전계방출 성능이 점차 저하되는 등의 해결해야할 많은 문제가 있다. 이러한 문제들을 해결하기 위하여 탄소계 재료로서 다이아몬드, 다이아몬드상 카본 등을 이용하려는 노력이 진행되어 왔다. 이중 유리화 비정형 탄소는 다량의 결함을 가지고 있는 유리질의 고상 탄소 재로로서, 전기전도도가 우수하면서 outgassing이 적고 기계적 강도가 뛰어나며 고온에서도 화학적으로 안정하여 전계방출 소자의 음극재료로서 알맞은 것으로 생각된다. 유리화 비정형 탄소가루를 전기영동법으로 기판에 코팅하여 전계방출 소자를 제작하였다. 전기영동 용액으로 이소프로필알코올에 질산마그네슘과 소량의 증류수, 유리화 비정형 탄소분말을 섞어주었고 기판으로는 몰리(Mo)가 증착된 유리를 사용하였다. 균일한 증착을 위해서 증착후 역전압을 걸어 주는 방법과 증착 후 플라즈마 처리를 하는 등의 여러 가지 방법을 사용했다. 전계방출 전류는 1$\times$10-7Torr이사에서 측정하였다. 1회 제작된 용액으로 반복해서 증착한 횟수에 따라 표면의 거치기, 입자의 분포, 전계방출 측정 결과 등의 차이가 관찰되었다. 발광이미지는 전압에 따라 변화하였고, 균일한 발광을 관찰하기 위해서 오랜 시간동안 aging 과정을 거쳐야 했다. 그리고 구 모양의 양극을 사용해서 위치를 변화시키며 시동 전기장을 관찰하여 위치에 따른 전계방출의 차이를 조사하여 발광의 균일성을 알 수 있었다.on microscopy로 분석하였으며 구조 분석은 X-선 회절분석, X-ray photoelectron spectroscopy 그리고Auger electron spectroscope로 하였다. 증착된 산화바나듐 박막의 전기화학적 특성을 분석하기 위하여 리튬 메탈을 anode로 하고 EC:DMC=1:1, 1M LiPF6 액체 전해질을 사용한 Half-Cell를 구성하여 200회 이상의 정전류 충 방전 시험을 행하였다. Half-Cell test 결과 박막의 결정성과 표면상태에 따라 매우 다른 전지 특성을 나타내었다.도상승율을 갖는 경우가 다른 베이킹 시나리오 모델에 비해 효과적이라 생각되며 초대 필요 공급열량은 200kW 정도로 산출되었다. 실질적인 수치를 얻기 위해 보다 고차원 모델로의 해석이 필요하리라 생각된다. 끝으로 장기적인 관점에서 KSTAR 장치의 베이킹 계획도 살펴본다.습파라미터와 더불어, 본 연구에서 새롭게 제시된 주기분할층의 파라미터들이 모형의 학습성과를 높이기 위해 함께 고려된다. 한편, 이러한 학습과정에서 추가적으로 고려해야 할 파라미터 갯수가 증가함에 따라서, 본 모델의 학습성과가 local minimum에 빠지는 문제점이 발생될 수 있다. 즉, 웨이블릿분석과 인공신경망모형을 모두 전역적으로 최적화시켜야 하는 문제가 발생한다. 본 연구에서는 이 문제를 해결하기 위해서, 최근 local minimum의 가능성을 최소화하여 전역적인 학습성과를 높여 주는 인공지능기법으로서 유전자알고리즘기법을 본 연구이 통합모델에 반영하였다. 이에 대한 실증사례 분석결과는 일일 환율예측문제를 적용하였을 경우, 기존의 방법론보다 더 나운 예측성과를 타나내었다.pective" to workflow architectural discussions. The vocabulary suggested

• The Journal of Korean Society for Radiation Therapy
• /
• v.19 no.1
• /
• pp.27-33
• /
• 2007

Purpose: We have performed SRS (stereotactic radiosurgery) for avm (arterry vein malformation) and brain cancer. In order to verify dose and localization of SRS, dose distributions from TPS ($X-Knife^{(R)}$ 3.0, Radionics, USA) and GafChromic $EBT^{(R)}$ film in a head phantom were compared. Materials and Methods: In this study, head and neck region of conventional humanoid phantom was modified by substituting one of 2.5 cm slap with five 0.5 cm acrylic plates to stack the GafChromic $EBT^{(R)}$ film slice by slice with 5 mm intervals. Four films and five acrylic plates were cut along the contour of head phantom in axial plane. The head phantom was fixed with SRS head ring and adapted SRS localizer as same as real SRS procedure. CT images of the head phantom were acquired in 5 mm slice intervals as film interval. Five arc 6 MV photon beams using the SRS cone with 2 cm diameter were delivered 300 cGy to the target in the phantom. Ten small pieces of the film were exposed to 0, 50, 100, 200, 300, 400, 500, 600, 700, 800, 900 cGy, respectively to calibrate the GafChromic $EBT^{(R)}$ film. The films in the phantom were digitized after 24 hours and its linearity was calibrated. The pixel values of the film were converted to the dose and compared with the dose distribution from the TPS calculation. Results: Calibration curve for the GafChromic $EBT^{(R)}$ film was linear up to 900 cGy. The R2 value was better than 0.992. Discrepancy between calculated from $X-Knife^{(R)}$ 3.0 and measured dose distributions with the film was less than 5% through all slices. Conclusion: It was possible to evaluate every slice of humanoid phantom by stacking the GafChromic EBT film which is suitable for 2 dimensional dosimetry, It was found that film dosimetry using the GafChromic $EBT^{(R)}$ film is feasible for routine dosimetric QA of stereotactic radiosurgery.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.138-144
• /
• 2013

The automation technology for overlay welding is needed due to the occurrence of severe corrosion and abrasion on the surface of internal contact in different shape of fittings. In Korea, different shapes of fittings have been manufactured by using the imported equipment of overlay welding automation at some companies. Thus the research on the development of overlay welding automation system (in short, OWAS) for a large L-type tube is urgently needed. In this paper, the investigation is focused on the optimal design of a supporting base for the (currently developing) OWAS of large L-type tube. Specifically we assume that the base which supports the equipment during the process of overlay welding is loaded as self-weight in the direction of gravity through static analysis especially when it is rotated 180 degree on the OWAS. For optimal design of a supporting base for OWAS of large L-type tube, Solidworks(R) (for 3-dimensional modelling) and ANASYS Workbench(R) (for structural analysis) are incorporated so as to proceed an optimization routines based on Response Surface Method (RSM) and Design of Experiment (DOE). In more specific, DOE finds out major factors (or dimensions) of the supporting base by using MINITAB(R). Then the regression equations between design variables (the major factors of supporting base) and response variables (deformation, stress and safety factor for the supporting base), which will be resulted in by RSM, verify the major factors of DOE. In the next step, Central Composite Design (CCD) plans 20 simulations of ANASYS Workbench(R) and then figures out the optimal values of design variables which will be reflected on the manufacturing of supporting base. Finally welding experiment is conducted to figure out the influence of overlay welding quality in applying the optimized design values of supporting base to the actual OWAS.

• The Journal of the Korea Contents Association
• /
• v.22 no.2
• /
• pp.35-43
• /
• 2022

The 2020 Gwangju Media Art Festival (2020 GMAF) was held in the area of the National Asian Cultural Center. Under the slogan "The entire Gwangju shines under the theme of "Aesthetics of Light and Coexistence," the media festival demonstrated projection mapping to Jeonnam (former) Provincial Office at the DATA+ Research Institute of Chung-Ang University's Graduate School of Advanced Video. This paper focuses on explaining the overall production process and content development of projection mapping demonstrated in the Jeollanam-do Provincial Government, which is a symbol of Korean democratization and is located in the center of Gwangju, Jeolla-do. It was intended to faithfully express the history of the 2020 GMAF and Jeonnam (former) provincial government, Gwangju's history, and democratization records. It was intended to show images, background sounds, sound effects, and visual effects using various special effects and high-power laser devices using unique characteristics of projection mapping. To this end, about 5 minutes and 30 seconds of content were planned, and it was divided into parts and topics, and one individual story was developed for each chapter.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.3
• /
• pp.207-214
• /
• 2015

Due to the limitations of conventional removable partial denture prostheses to treat a cleft lip & palate patient who shows scar tissue on upper lip, excessive absorption of the maxillary residual alveolar ridge, and class III malocclusion with narrow palate and undergrowth of the maxilla, 4 implants were placed on the maxillary edentulous region and a maxillary removable implant-supported partial denture was planned using a CAD/CAM milled titanium bar. Unlike metal or gold casting technique which has shrinkage after the molding, CAD/CAM milled titanium bar is highly-precise, economical and lightweight. In practice, however, it is very hard to obtain accurate friction-fit from the milled bar and reduction in retention can occur due to repetitive insertion and removal of the denture. Various auxiliary retention systems (e.g. $ERA^{(R)}$, $CEKA^{(R)}$, magnetics, $Locator^{(R)}$ attachment), in order to deal with these problems, can be used to obtain additional retention, cost-effectiveness and ease of replacement. Out of diverse auxiliary attachments, $Locator^{(R)}$ has characteristics that are dual retentive, minimal in vertical height and convenient of attachment replacement. Drill and tapping method is simple and the replacement of the metal female part of $Locator^{(R)}$ attachment is convenient. In this case, the $Locator^{(R)}$ attachment is connected to the milled titanium bar fabricated by CAD/CAM, using the drill and tapping technique. Afterward, screw holes were formed and 3 $Locator^{(R)}$ attachments were secured with 20 Ncm holding force for additional retention. Following this procedure, satisfactory results were obtained in terms of aesthetic facial form, masticatory function and denture retention, and I hereby report this case.

• The Journal of the Korea Contents Association
• /
• v.11 no.7
• /
• pp.234-238
• /
• 2011

This paper will evaluate the usefulness of 3D target of CBCT by comparing human body's posture and position when simulated treatment is being carried out as well as human phantom posture and position using CBCT which is applying OBI. From the Rando Phantom which is located in the datum point moved in parallel and rotationary direction using CBCT. Then the mean and standard deviation difference on images location difference that are acquired were compared with real the Rando Phantom' moved distance. To make a plan of simulated treatment with the same procedure of real radiation therapy, we are going to setup the Rando Phantom. With an assumption that the position is set in accurate place, we measured the setup errors accroding to the change of the translation and rotation. Tests are repeated 10 times to get the standard deviation of the error values. The variability in couch shift after positioning equivalent to average residual error showed lateral $0.2{\pm}0.2$mm, longitudinal $0.4{\pm}0.3$mm, vertical $-0.4{\pm}0.1$mm. The average rotation erroes target localization after simulated $0.4{\pm}0.2$ mm, $0.3{\pm}0.3$ mm, and $0.3{\pm}0.4$ mm. The detection error by rotation is $0{\sim}0.6^{\circ}$ CBCT 3D/3D matching using the Rando Phantom minimized the errors by realizing accurate matching during simulated treatment and patient caring.