• Electronics and Telecommunications Trends
• /
• v.8 no.3
• /
• pp.21-32
• /
• 1993

SMX/CMP는 통신망기술연구실에서 개발한 대용량 stand-alone 신호중계교환기 SMX-1을 이용하여 지능망 또는 이동통신망의 노드에 CCS No.7 접속이 가능하도록 설계된 CCS No.7 프로토콜 처리장치이다. 기존의 SMX/CMP는 2대의 대형 랙으로 구성되었으며, CCS No.7 프로토콜 처리 장치로서는 너무 크기 때문에 소형으로 되어야 한다는 요구가 있었다. 상호연결시스팀인 HSCU-8채널의 설계와 물리적인 재구성으로 SMX/CMP을 소형화 하였다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.2
• /
• pp.43-53
• /
• 1998

This paper addresses an optimization for reducing a steering error of a rack-and-pinion steering linkage with a MacPherson strut independent front suspension system. The length, orientations and inner joint positions of a tie-rod are selected as design variables and Ackerman geonetry, understeer effect, minimum turn radius, wheel alignment and packaging are considered as design constraints. Nonlinear kinematic analysis of the steering system is performed for calculating the values of cost and constraints, and Augmented Lagrange Multiplier(ALM) method is used for solving the constrained optinization problem. The optimization results show that the steering error are considerably reduced while satisfying all the constraints.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.877-880
• /
• 2009

수문의 개폐는 모터에 의한 회전이 권양기에서 감속 되고 증폭된 회전력이 랙에 의하여 직선 운동으로 바뀌어 회전 방향에 따라 상하로 움직여 열리고 닫히게 된다. 권양기는 상부 모터, 감속기, 메인 감속 장치, 동력 차단장치, 좌측 동력변환장치, 우측 동력 변환장치로 구성된다. 본 논문에서는 핀잭식 권양기의 최적 설계를 위하여 보조기어와 메인기어 트레인의 구조 해석, 진동해석 및 설계와 하중에 버틸 수 있는 상부구조물 몸체의 최적 설계를 통하여 설계변수를 확립한다.

• Journal of the Korean Geosynthetics Society
• /
• v.20 no.4
• /
• pp.113-124
• /
• 2021

Underground environmental infrastructure and energy production facilities, which are recognized as avoidable facilities such as landfills, are emerging as an important social issue due to urbanization and economic growth. In order to safely construct a large-scale plant facility in the underground space, it is necessary to increase the utilization of the limited space layout and minimize unnecessary columns. In this study, the plant modularization method(Pipe Rack Module) was reviewed to solve the problems of work constraints, assembly and demolition, process system interconnection, and maintenance that occur when plant facilities are underground. In addition, plant module analysis was performed by applying various load conditions (earthquake load, device load, earth pressure load, etc.) to improve spatial layout usability and secure structure stability. Based on the analysis results under various boundary condition, the implications regarding the minimum installation interval and module arrangement (draft) of basic modules required for the construction of an underground combined plant were derived.

• Journal of Distribution Science
• /
• v.6 no.2
• /
• pp.5-19
• /
• 2008

This study aims to provide the present general state of basic data about refrigeration and freezing warehouses scold storages because basic data about refrigeration and freezing warehouses are insufficient and imperfect at the moment. Research contents include the present general state of cold storages such as sales amount, capital(money invested), storage possession state by type, keeping area, cold storage facility capacity, and facility state such as existence of rack, building structure and floor height, and possessed facility state. According to research results, it was found that 86.7% of refrigeration and freezing warehouses are located in the capital region and Busan region in terms of regional distribution, and the average keeping area was found to be bigger in these two regions than that of other regions. In addition, the research shows that more than 80% of companies possess bonded warehouses and there was no big difference in the size and capacity of refrigeration and freezing warehouses. Regarding building structure, most of them were found to be reinforced concrete. However, only 25% of companies installed racks, but there was no statistical significance between existence of rack and the amount of capital and sales. Possessed facilities were found in the order of freight elevator, information system and dock. When it comes to cargo gear, companies were found to possess 9.1 units of forklift and 2.2 units of reach stacker in average. This research is expected to lay a basis for investigating, predicting and developing the local cold storage industry, and more detailed studies will be needed in the future.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.1
• /
• pp.94-100
• /
• 2004

Most power steering systems obtain the power by a hydraulic mechanism. Therefore, it consumes more energy because the oil power should be sustained all the times. Recently, to solve this problem the electric power system has been developed and become widely equipped in passenger vehicles. In this research the simulation integration technique for an electric power steering system with MATLAB/SIMULINK and a full vehicle model with ADAMS has been developed. A full vehicle model interacted with electronic control unit algorithm is concurrently simulated with an impulsive steering wheel torque input. The dynamic responses of vehicle chassis and steering system are evaluated. This integrated method allows engineers to reduce the prototype testing cost and to shorten the developing period.

• Proceedings of the KIEE Conference
• /
• 2001.07a
• /
• pp.101-105
• /
• 2001

본 논문에서는 한전 전력연구원에서 개발한 전력계통 해석용 시뮬레이터(이하 KEPS)를 이용하여 대규모 전력계통을 실시간으로 해석하는 방법 및 그 결과를 제시하고자 한다. KEPS는 캐나다 RTI사에서 개발한 RTDS(Real-Time Digital Simulator)를 근간으로 하는 대규모 디지털 실시간 시뮬레이터로써 총 26랙으로 구성되어 있으며 대규모 전력계통을 $50{\mu}sec{\sim}70{\mu}sec$의 타임스텝으로 계산할 수 있는 전력계통 전자기 과도현상 모의해석 장치이다. 본 논문에서는 KEPS를 이용하여 한전의 2000년 계통을 실시간으로 해석하고, 전력계통 안정화장치 (PSS), 계전기등 외부기기를 실시간으로 해석, 검증한 결과를 소개하기로 한다.

• Tribology and Lubricants
• /
• v.26 no.1
• /
• pp.61-67
• /
• 2010

The purpose of this paper is to study and analyze the failure examples on tribological characteristics of an automotive steering system. In this failure study, the grease leakage may stick leaked grease, dust, and wear particles between pinion and rack gears in mechanical steering system. In the case of seal failures such as a rod seal, o-ring and oil seals, the gear box and oil pump do not operate properly due to lack of oils. This means that oil pump does not supply a working fluid and produce a normal oil pressure of the steering system. This leads to leak a working fluid from the seals and produce a wear between pinion and rack gears. Especially, the leaked oil is usually mixed with internal wear particles and foreign dust/fine sands. Thus no leakage of working oils is very important design concepts, which is strongly related to the sealing components and smoothly operating of the mechanical friction parts of power steering system.

• Fire Science and Engineering
• /
• v.12 no.4
• /
• pp.13-19
• /
• 1998

We investigated the weight loss according to temperature using Thermal Gravimetric Analysis(TGA) in order to find the thermal hazard of carbon black(Hi-Black 10, Hi-Black 50L) dusts, and the properties of dust explosion in variation of the surface functional groups and specific surface area of their dust with the same particle size. Using Hartman's dust explosion apparatus which estimate dust explosion by electric ignition after making dust disperse by compressed air, dust explosion experiments have been conducted by varying concentration and size of carbon black dust. The explosion pressure of both carbon black increased as the specific surface area increased. The results indicated that Hi-Block 50L of which specific surface area was larger three to four times than that of Hi-Black 10 was much easier of dust explosion.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.4
• /
• pp.39-47
• /
• 1997

The focus of this research is to set up and describe the mathematical derivation of an automobile power-assisted rack and pinion steering system dynamics. The mathematical model of the power steering system dynamics with a 5 DOF linear vehicle model will be used in the computer simulation and evaluated comparing with the experimental results. This model is flexible to accommodate different vehicles through simple parameter changes. The developed mathematical model will attempt to provide enhanced driver realism to a Systems Technology, Inc. driving SIMulator(STISIM).