• Journal of Korea Multimedia Society
• /
• v.13 no.10
• /
• pp.1474-1486
• /
• 2010

In this paper, we propose an algorithm which represents the distance depiction technique of real painting that named "Aerial Perspective" in painterly rendering. It is a painting technique that depicts the attenuations of light in the atmosphere, and the scattering effect is changed by the distance, altitude and density of atmospheres. For the reflection of these natures, we use the depth information corresponding to an input image and user-defined parameters, so that user changes the effect level. We calculate the distance and altitude of every pixel with the depth information and parameters about shot information, and control the scattering effects by expression parameters. Additionally, we accentuate the occluding edges detected by the depth information to clarify the sense of distance between fore and back-ground. We apply our algorithm on various landscape scenes, and generate the distance-emphasized results compared to existing works.

• Journal of Korean Society of Steel Construction
• /
• v.9 no.4 s.33
• /
• pp.589-600
• /
• 1997

Cold-formed deck sections are used in many composite floor slab applications wherein the steel deck serves not only as the form for the concrete during construction but also as the principal tensile reinforcement for the bottom fiber of the composite slab. This paper provides the results of an experimental study performed for the composite slabs with the new shaped deck plates with the locking ribs, the dove tails, and the powerful embossment, which are the mechanical means to improve positive interlocking effect between the deck and the concrete. A total of 28 specimens are tested to investigate the composite effects between the concrete and metal deck plate. Important parameters in this are the span length, the thickness of the deck plate, support condition, and whether shear studs are placed at each support or not. The test results are summarized for the maximum load and failure behavior for the specimens.

• Elastomers and Composites
• /
• v.45 no.2
• /
• pp.94-99
• /
• 2010

340 nm UV radiation of $2500\;kJ/m^2$ irradiated a thermoplastic elastomer (TPE) specimen used for interior and exterior materials of a car. After the UV irradiation, the black sample surface was changed to gray. Materials on the aged sample were collected and analyzed using GC/MS, but significant materials were not found. Lots of small cracks were found on the aged specimen surface. Whitening phenomenon of the aged sample disappeared by brushing or searing with a fire on the aged surface. After brushing or searing with a fire, small cracks on the surface vanished. Samples before and after the aging, and the treated samples with brush or fire were analyzed using image analyzer, SEM, EDX, and ATR and the results were compared. The vanished whitening phenomenon by brushing or searing was explained with filling the small cracks by polypropylene of TPE.

• Journal of Practical Engineering Education
• /
• v.7 no.2
• /
• pp.119-123
• /
• 2015

ABS material is easy to process, impact resistance and heat resistance is strong. ABS material is often used as a substitute for the interior and exterior metal material for an automobile. As the demand of ABS increases, fabricating education using ABS has also been increasing its importance. As part of its education, ABS material is used in the mold fabricating part of the regional and national skills competition. At this time, the force of the vise for fixing the ABS material in the processing using the ABS material can affect the final shape after machining. However, it has not been an accurate description of the notes and instructions of working in education. Therefore, in this study, we study the impact the force of vise affect structural shape in the fabricating education using ABS material and during fabricating education of ABS material, trying to present the notes of the appropriate it.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.4-11
• /
• 1995

The amounts of waste stone and stone powder sludge that occurred in the quarry and processing plant of s stone plates, have been increased with the development of stone industry. The manufactunng process of 따tificial s stone was studied to reduce the outlet of these wastes and utilIze them as raw materials for architecture, interior decoration and art work. In order to compare the properties of artiflcial stone with those of natural building-stone, the physi$\alpha$II properties of artificial stone such as specific gravity, absorption ratio, elastic wave velocity, compressive s strength, tensile strength, shore hardness, elasticity and Poission's ratio were measured. From the mesaured d data of physical properties, it was found that physical propertIes of artificial stone were controlled by homogeneous m mixing ratio of constituents, molding pressure, and amount of binder. Also, from the thermo-gravimetric analysis, it was found that artIfIcial stone manufactured had a good thermal stability up to $300^{\circ}C$. It was concluded that t the optimum conditions for manufacturing process of artificial stone were $200kg/\textrm{cm}^2$ of molding pressure, 12-15 w weight % of binder amounts.

• Land and Housing Review
• /
• v.14 no.4
• /
• pp.103-110
• /
• 2023

People who spend most of their day indoors are continuously exposed to internally and externally generated indoor pollutants. According to a 2022 report from the World Health Organization (WHO), air pollution is the cause of more than 7 million deaths annually worldwide, emphasizing the seriousness of indoor air pollutants. Air pollutants include nitrogen oxides (NOx), formaldehyde (HCHO), and volatile organic compounds (VOCs), which have serious effects on the human body. Photocatalyst is a material that can remove these indoor air pollutants. Photocatalysts not only have the ability to remove dust precursors, but also have antibacterial, sterilizing, and deodorizing functions, making them effective in improving indoor air quality. This study suggests areas and methods in which photocatalysts can be applied to buildings. Fields of application include interior and exterior construction materials such as concrete, as well as organic paints and ventilation devices. If appropriate utilization plans are developed, it may be possible to improve the built environment through reduced indoor and outdoor pollutant levels.

• Polymer(Korea)
• /
• v.39 no.3
• /
• pp.433-440
• /
• 2015

Aluminum trihydroxide (ATH) has been commonly employed as a flame retardant for ethylene vinyl acetate (EVA) copolymers. In the present work, ATH was obtained from a recycling process of multi-layer packaging film wastes. EVA/ATH composite samples were prepared using a two roll-mill and flame retardancy of EVA/ATH composites were examined using limiting oxygen index (LOI) and flame retardancy test (UL94). We observed excellent flame retardancy in case of adding 150 phr or more of recycled ATH to EVA. Particle size and specific surface area play crucial roles in LOI value and UL-94 classification of the EVA/ATH composites. Smaller particle size and higher specific surface area of ATH was found out to improve the flame retardancy. Regarding tensile properties, crosslinked EVA/ATH compounds which is practically used for electric cables had similar to or even better tensile property values than the ones without ATH.

• Polymer(Korea)
• /
• v.39 no.1
• /
• pp.64-70
• /
• 2015

Thermally expandable microcapsules (TEMs) can be expanded upon heating since the activation energy of liquid hydrocarbon at the core of the TEMs increased at high temperature. Due to this property, TEMs are widely used in the industry as blowing agents or light-weight fillers. In this article, chemical blowing agent and TEM were used for making polypropylene (PP) foams, and their mechanical properties were compared. Physical properties (tensile strength, impact strength etc.) of PP foams decreased with increasing the amount of blowing agents while weight of specimen decreased. However, PP foam produced with TEMs showed higher impact strength than the one with a chemical blowing agent. In order to figure out the difference of impact strength, the morphology of PP foamed was investigated. Expanding properties of TEM can be controlled by changing core back distance.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.408-413
• /
• 1996

In most cases of diffuse bullous emphysema and chronic obstructive lung disease, t e risk of surgical treatment is very high. But surgical treatment in selected cases of bullous emphysema with localized involvement of only one side of the lung has suggested safe and good management. So patient selection of surgical treatment Is one of the most important things in management of bullous emphysema. From 1987 to 1992, 11 patients were operated for bullous emphysema with giant bullae at the Department of Thoracic and Cardiovascular Surgery of Chonbuk National University Hospital. Author selected surgical candidates who had progressive dyspnea and symptomatic bullae occupying more than one third of the hemithorax and shifting the trachea and mediastinum to the opposite side of the lung. There were 7 males and 4 females ranged from 19 to 61 years of age. Operative procedures were bullectomy and/or wedge resection in 7 cases, segmentectomy in 2 cases and lobectomy in 2 cases. Symptoms and pulmonary function of all patients were improved six months to three years postoperat vely. There were no postoperative death. We conclude that surgical treatment of bullous emphysema with giant bullae is safe and a good treatment of modality in indicated patients.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.427-432
• /
• 1996

Eighteen patients operated on for thymoma from 1985 to 1994 were evaluated, 3 with myasthenia gravis and 15 without. Masaoka's clinical staging revealed stage I disease in 5(27.8%), stage ll in 6 (33.3%), stage 111 in 6(33.3%), and stage IV in 1 (5.6%). Of the 18 patients, 10 had surgical resection as the only treatment and the remaining 8 (stage II : 1 patient, stage III : 6 patients, stage IV: 1 patient) had surgical resection with adjuvant preoperative or postoperative radiotherapy and/or chemotherapy There was no operative mortality. Currently, 15 patients are alive, 3 are dead. The mean follow up time for all patients was 3.4 years. Acturlal survival at 5 years was 82.2 $\pm$ 9% for all patients' 100% for those in stage I and II, and 62.5% for those in stage III. Pleural and mediastinal recurrence developed in one patient in stage II which was considered to have noninvasive disease on the operating field. Two patients underwent reoperation for recurrence of thymoma a intervals of 14 months and 52 months. Clinical stage and resectability had a significant prognostic value(p < 0.05). The presence of myasthenia gravis is no longer considered as an adverse factor in survival.