• Explosives and Blasting
• /
• v.19 no.1
• /
• pp.63-70
• /
• 2001

발파진동에 영향을 미치는 여러 매개변수들 중에서 현재 발파진동 예상식을 도출하기 위해 장약량과 거리를 매개변수로 하여 발파진동을 예측하고 있다. 여기에 사용되는 장약랑은 지발당 최대장약량으로, 발파당 장약량과의 관계는 언급하고있지 않다. 따라서 본 연구에서는 지발당 최대장약량이 동일한 상태에서 발파공수를 변화시키는 방법으로 발파당 장약량이 변화할 때 발파진동속도의 변화를 비교·분석하였다. 발파공수를 5공에서 10공까지 변화시 켜가며 발파진동을 폭정하고 분석한 결과 지발당 장약량이 동일함에도 불구하고 공수가 증가함에 따라 환산거리 60∼90 구간에서 진동속도가 높게 측정되었다

• Journal of the Korean Society of Safety
• /
• v.10 no.1
• /
• pp.74-83
• /
• 1995

발파작업에서 적합한 폭약의 선택과 적정 장약량 산출은 매우 중요하다. 특히 적정 장약량 산출은 발파안전 및 경제성 측면에서 매우 중요한 요소이므로 다음과 같은 사항을 충분히 고려하여 설계 및 시공할 것을 권장한다.(중략)

• Explosives and Blasting
• /
• v.20 no.1
• /
• pp.77-82
• /
• 2002

환산거리 예상식에 의한 진동의 예측은 널리 적용되고 있다. 여기서 환산거리는 거리와 지발당 장약량에 의해 결정된다. 그러나 환산거리가 같다고 하여 진동수준이 같은 것은 아니며, 많은 실무자들이 총장약량이 증가함에 따라 진동이 커지는 경향을 경험하고 있다. 본 연구에서는 총장약량이 진동수준에 미치는 영향을 고려한 진동 예측식을 제안하였고, 이 식을 기존의 계측자료에 적용하여 검토하였으며, 일정한 범위 내에서 진동속도에 미치는 총장약량의 영향을 반영할 수 있음을 보였다

• Explosives and Blasting
• /
• v.22 no.1
• /
• pp.15-22
• /
• 2004

일반적으로 석회석 광산에서의 발파는 ANFO를 사용하여 주로 시행되어지고 있다. Bulk장전 시스템의 도입으로 장약, 발파가 간편하여 효과적으로 발파를 할 수 있고 그 비용도 저렴하다는 장점을 가지고 있다. 그러나 수공에서의 장약이 불가능하고 낮은 위력으로 인해 저항선 및 공간격의 제한이 커서 이에 따르는 발파효율의 저하가 불가피 하였다. 본 연구는 현재 해외에서 일반화되어 사용되고 있는 Bulk EMX(HiMEX)폭약을 국내 현장에 적용함으로 그 적용 방법과 이점을 규명하고자 시행되었다. 대규모 석회석 광산을 대상으로 적정 패턴을 산출하기 위해 기존의 발파 패턴과 비교하여 시험발파를 시행하여 저항선 및 공간격을 산정 하였으며 이를 토대로 해서 성신양회, 현대시멘트 영월사업소와 함께 장기간 시험발파를 실시하고 그 자료를 검증하였다. 그 결과 HiMEX는 초유폭약에 비해 비중이 높아 공당 장약량은 45%정도 증가하나, 1발파 당 생산 물량이 증가하여 5%이상의 장약량 감소효과를 볼 수 있었다. 또한 35∼50%정도의 천공비용이 감소되는 것으로 나타났다.

• Explosives and Blasting
• /
• v.24 no.1
• /
• pp.29-37
• /
• 2006

The demand of the bulk emulsion explosives is being increased more and more by using the mechanization loading system in a domestic tunnel sites. Thus, a rational design criteria that is suitable for rock and circumstance condition has been required. In this study, authors investigated a optimum specific charging weight and resonable charging weight based on domestic blasting construction cases, which were performed by using a mechanization bulk emulsion explosives loading system up to now. Authors also analyzed the blasting results and got the following formula $({\Upsilon}= 0.669 + (0.0154{\times}RMR),\;r=0.81)$ from the relationship between a optimum specific charging weight of bulk exp. and rock mass rating. A range of resonable charging weight with a drilling depth is calculated considering a rock conditions.

• Explosives and Blasting
• /
• v.23 no.1
• /
• pp.19-30
• /
• 2005

In this study, the standard particle velocity equations and the equation for calculating specific charge weight with application of rock fracture method using the finecker plus are suggested and the existing equation of fragmentation was transformed into one applicable to finecker plus. Standard rock fracture pattern was designed. Square root scaled equation is $V=345.39(D/\sqrt{W})^{-1.4484$. computable equation to specific charge wei인t is $W_f=(2.3\~2.5)\;f_agdV$, charge weight per hole is 0.54kg, and proportion of diameter 30cm fragmentation is about $48.7\%$. This rock fracture method nay him out to be more excellent than the other methods.

• Explosives and Blasting
• /
• v.37 no.1
• /
• pp.24-33
• /
• 2019

Recently, Electronic Detonators have gradually increased their performance for various purposes such as vibration control and improved Fragmentation. This study analyzed the vibration estimation equations of electric and electronic detonator blast by comprehensive analysis of the vibration data collected during electric and electronic detonator blast waves at the comparison sites of urban areas, geology and soil conditions, stone quarries and mines in different areas of Korea from June 2017 to December 2018. It has been confirmed that electronic detonator blast can meet the criteria for allowing vibration even if maximum charge weight per delay is increased by 1.5 times compared to the electric detonator blast.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2000.09a
• /
• pp.229-234
• /
• 2000

The propagation of blast vibration and the damping characteristics depend on both the mechanical properties of rock mass and weight charge. In this study, the characteristics of propagation and damping were analyzed by FLAC. The construction site was the second Kwang-ju circulating read. Taguchi method which is one of experimental design methods was used for determination of input data and parameter levels. The results showed that rock density was the most dominant of variables being concerned in this study, which affect the propagation of blast vibration.

• Tunnel and Underground Space
• /
• v.10 no.3
• /
• pp.475-480
• /
• 2000

The propagation of blast vibration and the damping characteristics depend on both the mechanical properties of rock mass and weight charge. In this study, the characteristics of propagation and damping were analyzed by FLAC. The construction site was the second Kwang-ju circulating road. Taguchi method which is one of experimental design methods was used for determination of input data and parameter levels. The results showed that rock density was the most dominant of variables being concerned in this study, which affect the propagation of blast vibration.

• The Journal of Engineering Geology
• /
• v.31 no.1
• /
• pp.103-118
• /
• 2021

For management and preservation measures of lava tube, it is studied how the blasting vibration by constructions near Geomunoreum lava tubes in Jeju affect lava tube. 11 boreholes were drilled in study area, and in-situ blasting tests were conducted by changing from 0.5 kg to 10 kg charge per delay in those boreholes. The vibration velocity, which meets the regulatory vibration criterion during daytime, was estimated as below 0.276 cm/sec by analyzing the relationship between vibration velocity and vibration level. In addition, SRE and CRE were calculated from the results of in-situ blasting tests, and k-values were shown as 130.04 in SRE, 199.71 in CRE, respectively. Also, n-values were shown as -1.717 in SRE, -1.711 in CRE, respectively. Charge per delay were assessed based on these equations, and charges per delay had ranges of 0.57~7.42 kg/delay in estimation equation of vibration velocity, 0.21~5.29 kg/delay in SRE, and 0.04~5.51 kg/delay in CRE, considering the 0.2 kine vibration criterion for cultural heritage and the 20~100 m distance from vibration source. Additionally, the relationships which meet the criteria of 0.2 kine, were calculated by combining CRE in this study with the result of previous study. Allowable charges per delay, which meet the criteria of 0.2 kine, were evaluated as 1.07 kg/delay in 50 m, 5.13 kg/delay in 100 m and 22.26 kg/delay in 200 m distances. These relationships for each vibration velocity are useful to deduce charge per delay for the ground near Geomunoreum lava tube.