• Aerospace Engineering and Technology
• /
• v.7 no.1
• /
• pp.229-235
• /
• 2008

The ground flight termination system(GFTS) could be used for the termination of launch vehicle in flight motion when the launch vehicle deviates from the designated route due to the system malfunction or failure as well as the launch vehicle can't be tracked by the ground tracking system. This paper introduces the basic concept and design of the ground flight termination system to be used for KSLV launch mission in NARO space center. In order to design the optimal ground flight termination system for KSLV launch application, the operational concept reflected on the flight trajectory and system characteristics of KSLV launch vehicle should be considered. Moreover the RF link budget analysis, and the analysis for system availability and reliability are done. Based on the analysis above, the each subsystem of ground flight termination to transmit the termination signal in stable is designed for KSLV launch mission.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.4
• /
• pp.520-528
• /
• 2018

This paper studies the optimal inventory levels of Korea Assault Amphibious Vehicle(KAAV)'s assemblies in order to assure the required operational availability. The simulation model is built and implemented for the impact of the inventory levels on operational availability. Using regression analysis and integer programming, the optimal inventory levels of essential assemblies are suggested and analyzed. Finally, sensitivity analysis is conducted with recycling maintenance delay time.

• Journal of the Korea Society for Simulation
• /
• v.21 no.3
• /
• pp.79-88
• /
• 2012

Recently, the study in efficient operation, maintenance, and equipment-design have been growing rapidly in military industry to meet the required missions. Through out these studies, the importance of Concurrent Spare Parts(CSP) are emphasized. The CSP, which is critical to the operation and maintenance to enhance the availability, is offered together when a equipment is delivered. Despite its significance, th responsibility for determining the range and depth of CSP are done from administrative decision rather than engineering analysis. The purpose of the paper is to optimize the number of CSP per item using simulation and multiple regression. First, the result, as the change of operational availability, was gained from changing the number of change in simulation model. Second, mathematical regression was computed from the input and output data, and the number of CSP was optimized by multiple regression and linear programming; the constraint condition is the cost for optimization. The advantage of this study is to respond with the transition of constraint condition quickly. The cost per item is consistently altered in the development state of equipment. The speed of analysis, that simulation method is continuously performed whenever constraint condition is repeatedly altered, would be down. Therefore, this study is suitable for real development environment. In the future, the study based on the above concept improves the accuracy of optimization by the technical progress of multiple regression.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.395-412
• /
• 2012

RAM analysis using field data is important and useful for acquisition and operation of weapon systems. But this kind of analysis didn't conducted due to the absence of weapon system's failure data in case of warship. This study suggest failure tracking process based on maintenance and repair parts consumption data and proves suggested method enables conducting RAM analysis. This method obtains validity through field operator's reviews. The results on 9 warships in this study significantly correspond with weapon system operator's experiences. Because the result of this study contains effects of various operational environments in field, it will useful for correction and verification on existing another weapon system's RAM estimates. If this kind of RAM data are sufficiently accumulated, it will be used to DB of korean unique RAM analysis.

• Information and Communications Magazine
• /
• v.26 no.3
• /
• pp.9-15
• /
• 2009

전쟁양상이 네트워크 중심 전으로 발전되기 위해서는 기동중에도 멀티미디어 등 대용량의 정보를 실시간으로 소통할 수 있는 정보통신기반체계가 필수적으로 요구된다. 이러한 기반을 구축하기 위해 개발 중인 전술정보통신체계(TICN: Tactical Information and Communication Network)의 부체계 중 하나인 전술이동통신체계는 이동하는 전장가입자에게 음성서비스이외 전장상황 공유를 위한 대용량의 데이터 서비스를 제공해야 하므로, 주파수 효율성이 좋은 Mobile WiMAX 기술을 기반으로 구현되었다. 구현된 장비는 전장 환경과 비슷한 산악지형의 테스트베드에 설치되어서 운용 가능성을 검증하였다. 본고에서는 Mobile WiMAX기반의 전술이동통신체계의 가용성을 확인하기 위해 수행한 이론적인 분석과 테스트베드에서 확인한 성능에 대해 소개한다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.105-106
• /
• 2014

대한민국은 2022년부터 위성을 통한 GPS 측위 보강시스템인 SBAS의 본격 서비스를 목표로 연구개발을 진행 중에 있으며, 기존에 운용되고 있는 전국망 해양 DGPS국을 SBAS 기준국으로 활용하기 위한 방안을 모색하고 있다. 이런 이유에서 본 논문은 해양 DGPS국의 효과적인 공동 활용방안 제안을 위하여 SBAS 기준국의 요구기능과 성능을 분석하고, 해양 DGPS국과 비교하였다. SBAS는 관련 장비와 시설에 대한 검증이 엄격하고, 인증이 필수적이다. 따라서 본 논문에서는 해양 DGPS국이 SBAS 기준국으로써 SBAS 운영에 필요한 성능을 만족시키면서 해양 DGPS의 본래 기능과 성능, 표준 준수는 물론이고, 위성항법 시스템의 다원화에 유연하게 대응할 수 있도록 DGPS국의 구조를 설계하였다.

• Korean Management Science Review
• /
• v.24 no.2
• /
• pp.81-93
• /
• 2007

Achieving a target operational availability is more economical and efficient than having many quantities of the weapon system, since the cost of weapon system becomes expensive. The intent of this study is twofold; first, we develop the simulation model to determine the optimal inventory level of the maintenance float while achieving a target operational availability of the Korean-made helicopter. The quantity decision model considers following factors such as a reliability. a turn around time(TAT). a protection level for inventory, and so on. Second, we analyze whether the existence of a lateral transshipment among bases and the reduction of TAT relate to an inventory level and the operational availability. The research result shows that both TAT and lateral transshipment have an effect on reducing the inventory level of the maintenance float and improving an operational availability.

• Proceedings of the Korean Information Science Society Conference
• /
• 2005.07a
• /
• pp.397-399
• /
• 2005

최근 우선 네트워크 상에서 이동성을 보장하기 위한 다양한 인프라 기술에 대한 연구가 활발히 진행되고 있다. 한국군 전술통신망은 이기종, 다특성 통신장비로 구성된 네트워크가 복합적으로 운용되고 있다. 임무수행을 위한 신속한 상황인식과 지휘통제가 최상위 지휘관으로부터 이동중인 최하위 전투원까지 이음새없는(seamless) 통합망을 통해 전달되어야 하나 현재 각 네트워크간 통합기술이나 통합 아키덱처에 관한 연구는 미흡한 실정이다. 본 논문에서는 현재 가용한 이동 네트워크 기술 현황을 제시하고, 현 한국군 전술통신망의 특징과 장단정을 제시한 후, 복합적인 네트워크 환경 하에서 노드의 이동성을 지원하는 계층적 전술통신망 아키텍처에 대한 통신망 설계시 고려사항, 전체 아키텍처 구조 및 각 계층별 노드의 구조와 이들 노드간의 인터페이싱, 이동노드에 대한 이동성 관리 방안을 제안한다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.3
• /
• pp.31-39
• /
• 2014

In KSLV-I launch mission, real-time data from the tracking stations are acquired, processed and distributed by the Mission Control System to the user group who needed to monitor processed data for safety and flight monitoring purposes. The processed trajectory data by the mission control system is sent to each tracking system for target designation in case of tracking failure. Also, the processed data are used for decision making for flight termination when anomalies occur during flight of the launch vehicle. In this paper, we propose the processing mechanism of slaving data which plays a key role of launch vehicle tracking mission. The best position data is selected by predefined logic and current status after every available position data are acquired and pre-processed. And, the slaving data is distributed to each tracking stations through time delay is compensated by extrapolation. For the accurate processing, operation timing of every procesing modules are triggered by time-tick signal(25ms period) which is driven from UTC(Universial Time Coordinates) time. To evaluate the proposed method, we compared slaving data to the position data which received by tracking radar. The experiments show the average difference value is below 0.01 degree.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.1
• /
• pp.51-59
• /
• 2022

As the weapon system's dependence on software functions increased, software became a key factor in controlling the weapon system. In addition, as software development becomes more important domestically and internationally, software verification becomes an issue. The recent defense market has recognized this point and is demanding a plan for weapon system software maintenance. In this paper, we propose a weapon system software maintenance plan using Automatic Test Equipment. The specific method is to use a simulator to check the software function and identify failure cases. This is an effective way for developers to reduce the Total Corrective Maintenance Time(TCM) of the weapon system by reducing the time it takes to identify failure cases. It has been proven that the proposed Automatic Test Equipment can achieve software maintenance and excellent Maintainability and Operational Availability compared to the existing ones.