• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.217-221
• /
• 2005

도시의 기능이 날로 커져가고 땅속 지하매설물은 포화상태에 이르렀다. 또한 시민들의 의식 수준이 높아가면서 도시에서의 굴착시공은 민원유발과 교통소통장애 문제로 날로 어려워지고 있는 것이 현실이다. KT에서는 무인 및 유인 통신구를 건설할 수 있는 장비를 이미 개발한바 있으며, 본 연구를 통해 도심지에서 보다 효율적으로 통신관로 ${\Phi}50mm,\;{\Phi}150mm,\;{\Phi}300mm$를 시공할 수 있는 장비를 개발하게 되었다. 도시는 복잡하기 때문에 비개착 시공에 있어서 시공 점용면적이 상대적으로 많을 경우 어려움을 겪게된다. 소구경 비개착 장비인 XS-300은 길이 1.45m 폭 0.8m 높이 0.97m 이며 중량은 700kg인 소형장비인 것이 특징이다. XS-300은 도심지에서 통신맨홀 터파기 부분을 압입구로 활용할 수 있으며 경제적인 비용으로 개착식 시공이 불가한 구간에 대한 인입관로 구성과 지하장애물 하월시공, 도로횡단 시공 시에 적합한 장비이다. 특히 타 시설물을 관통한 불량통신시설과 재해에 취약한 통신시설에 대해 안전하고 경제적인 비용으로 이설시공을 할 수 있으며 통신인프라 기초시설 안정화 및 품질고도화에 기여할 수 있을 것이다.

• 전기의세계
• /
• v.42 no.4
• /
• pp.36-44
• /
• 1993

최근 사회적인 여건변화와 전산계산기등의 보급으로 인하여 배전선로를 휴전시키기가 곤란하고, 휴전작업의 계획시 장기간이 소요되며, 진단에 필요한 장비가 상당하고, 원상복구후 송전에 장시간이 피룡하며, 열화진단시 직류 고전압인가(인가전압이 낮으면 불량케이블을 검출할 수 없음)에 따른 케이블의 열화촉진 및 절연파괴사고의 유발 등 현행 방법과 같은 휴전에 의한 직류고전압 열화진단 방법에도 문제가 많다. 따라서 수용가에 대한 봉사수준을 향상하고, 휴전작업으로 인한 정전시간을 경감하며, 열화진단에 소요되는 장비와 인력을 경감시키기 위하여 케이블 절연성능의 열화진단을 활선상태(교류전압이 인가되어 운전중인 상태)에서 실시하여야 할 필요성이 매년 높아가고 있다.

• The tire
• /
• s.236
• /
• pp.38-43
• /
• 2008

우리협회에서는 타이어 장비불량으로 인한 교통사고를 예방하고 올바른 사용방법을 홍보하고자 업계와 합동으로 타이어 안전검사 및 서비스 행사를 매년 실시하고 있으며, 범국민적인 타이어 사용 및 관리에 대한 안전의식 향상을 위하여 한국도로공사와 교통안전공단, 경찰청 등 유관기관과의 유기적인 협력을 바탕으로 타이어 안전서비스를 확대, 실시하고 있다. 본고는 08년 상반기간 우리협회가 실시한 타이어 정기 안전검사와 운전자의 타이어 사용.관리에 대한 설문조사의 결과이다.

• Journal of the Microelectronics and Packaging Society
• /
• v.16 no.3
• /
• pp.45-51
• /
• 2009

Vertical wet equipment was newly developed in stead of horizontal wet equipment which has been widely used for BGA develop process. We intended to eliminate the collision problem between equipment's transferring rollers and fine circuit patterns, which could be achieved by fixing the BGA panel vertically using jig unit. The process characteristics of vertical wet equipment were evaluated by conducting uniformity evaluation, pattern damage evaluation and defect analysis. The process uniformity of the vertical equipment was measured to be the same level as the uniformity of horizontal equipment. And it was measured that $3{\sim}4{\mu}m$ finer circuit pattern could be processed adopting vertical equipment rather than horizontal equipment.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.41 no.6
• /
• pp.61-66
• /
• 2004

To make a guide line of property control of angiography equipments, we made standard evaluation sheet forms of facility and management of angiography suite, physical properties of angiography equipments, and image quality of film and then surveyed them at 29 hospital nationwide. Survey and development of standard evaluation sheet form of physical properties of angiography equipments. By using resolution & radiation dose, physical properties of angiography equipments of 49 in number nationwide were evaluated. Most of them (91%) had good performance.

• The KIPS Transactions:PartA
• /
• v.11A no.4
• /
• pp.235-242
• /
• 2004

When manufacturing information and communication device that consists of lots of part, it is important to improve the quality of the produced system by inspecting the system accurately and exclude the defected part. In case of LCD which is recently in a great demand, the inspection process of the nut which bonds the back frame to protect the LCD panel has to be done by human labor. It highly required an automatic inspection system which can inspect the nut without wasting human resources. In this paper, we describe the process of developing a system which automatically inspect the status of nuts inserted during the manufacturing of LCD. The nut inspection vision system developed measures the number of nut's spiral, the distance between pitches, the width of a pitch, and the inside diameter of nut. We have adopted lens with high magnifying power and calibration tool and intended to produce automatic lighting for maintaining a stable environment for a high precision system. We also developed the algorithms for analyzing the nut. We apply the system to real factory field and verify that it is better than the man power in terms of error rate.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.40 no.4
• /
• pp.206-213
• /
• 2003

In this paper, we propose a design method of automatic thickness measurement and defect inspection system, which measures the thickness of the autoclaved lightweight concrete block and inspects the defect on a real-time basis. The image processing system was established with a CCD camera, an image grabber, and a personal computer without using assembled measurement equipment. For the realization of proposed algorithm, the preprocessing method that can be applied to overcome uneven lighting environment, threshold decision method, unit length decision method in uneven condition with rocking objects, and the curvature calibration method of camera using a constructed grid are developed. From the experimental results, we have found that the required measurement accuracy specification is sufficiently satisfied using our proposed method.

• 농업기술회보
• /
• v.52 no.4
• /
• pp.14-15
• /
• 2015

먹는 것이 아니어서 유전자변형작물(GM작물)로서의 거부감이 덜할 뿐 아니라 고부가 창출가능성이 높아 최근 GM 화훼류 개발에 대한 관심이 높아지고 있다. 이러한 연구 환경에 맞춰 농촌진흥청에서는 형질전환 기술을 이용하여 일반적인 교잡 육종 기술로 개발하기 쉽지 않은 불량 환경인 고염도와 물이 공급되지 않은 조건에서도 견디는 능력이 탁월하게 증진된 장미를 개발했다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.101-106
• /
• 2020

This research is related to a development of the ultrasonic detector for an internal defect detection of various assembly part's welding zone. In this research, measurement S/Ws including system's motion control, S/W ultrasonic transmitter/receiver control, defect judgment standard setting, etc. have been designed for ultrasonic detection, and welding defects sample network, etc. were also designed for comparison between products in good condition and defective products. Through this kind of system, automatic detection function can be performed for the depth and the defect location of the assembly parts welding zone, and the system is able to make a judgment of internal defect detection which is used to be performed by an expert in the past.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1812-1816
• /
• 2011

This research developed chemical flow control system(CFCS) essential for spinner equipment in nano semiconductor manufacturing process under the 100nm to prevent complex process defect due to missing spread after chemical injection. The devices developed in this research, which can be swiftly replaced in case abnormal state element changes or wafer manufacturing defect occurs, are anticipated to improve module yield as well as real-time monitoring on the state element. In addition, as a result of mounting H/W and S/W system to control detailed operation sequence in production line and executing performance check and verification, we can be exactly detected in five abnomal process type.