• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.732-735
• /
• 2012

본 논문은 지상에서 발생하는 전자파 잡음 신호의 유입에 의해 많은 영향을 받을 수 있는 헬기 등 항공기의 레이더경보수신기(Radar Warning Receiver)에서도 레이더 펄스 신호를 탐지할 수 있는 통신전자파잡음 동적제거 기법을 제안하였다. 본 논문은 지상의 노이즈 신호를 분류하는 방법을 제시하였고, 노이즈 신호 레벨을 판단하여 효과적으로 잡음을 제거하는 알고리즘을 제안하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.3
• /
• pp.25-32
• /
• 1994

This paper presents the Korean digit recognition method under noise environment using the spectral mapping training based on static supervised adaptation algorithm. In the presented recognition method, as a result of spectral mapping from one space of noisy speech spectrum to another space of speech spectrum without noise, spectral distortion of noisy speech is improved, and the recognition rate is higher than that of the conventional method using VQ (vector quatization) and DTW(dynamic time warping) without noise processing, and even when SNR level is 0dB, the recognition rate is 10 times of that using the conventional method. It has been confirmed that the spectral mapping training has an ability to improve the recognition performance for speech in noise environment.

• The KIPS Transactions:PartB
• /
• v.14B no.4
• /
• pp.263-272
• /
• 2007

This paper proposes a skeleton-based hierarchical shape description scheme, called a skeleton tree, for accurate shape-based image retrieval. A skeleton tree represents an object shape as a hierarchical tree where high-level nodes describe parts of coarse trunk regions and low-level nodes describe fine details of boundary regions. Each node refines the shape of its parent node. Most of the noise disturbances are limited to bottom level nodes and the boundary noise is reduced by decreasing weights on the bottom levels. The similarity of two skeleton trees is computed by considering the best match of a skeleton tree to a sub-tree of another skeleton tree. The proposed method uses a hybrid similarity measure by employing both Fourier descriptors and moment invariants in computing the similarity of two skeleton trees. Several experimental results are presented demonstrating the validity of the skeleton tree scheme for the shape description and indexing.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.4
• /
• pp.151-158
• /
• 2006

In this paper, we proposed a new audio fingerprint extraction method, based on Philips' music retrieval algorithm, which uses the energy difference of neighboring filter-bank and probabilistic characteristics of music. Since Philips method uses too many filter-banks in limited frequency band, it may cause audio fingerprints to be highly sensitive to additive noises and to have too high correlation between neighboring bands. The proposed method improves robustness to noises by reducing the number of filter-banks while it maintains the discriminative power by representing the energy difference of bands with 2 bits where the quantization levels are determined by probabilistic characteristics. The correlation which exists among 4 different levels in 2 bits is not only utilized in similarity measurement. but also in efficient reduction of searching area. Experiments show that the proposed method is not only more robust to various environmental noises (street, department, car, office, and restaurant), but also takes less time for database search than Philips in the case where music is highly degraded.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.10
• /
• pp.2246-2255
• /
• 1997

Gardner proposed an algorithm for timing recovery of BPSK/QPSK signals based on zero-crossing detection technique. When Gardner's method is applied to multi-level PAM signals, it suffers from increased timing jitter due to self noise. To alleviate this problem, an improved algoritjm is proposed in this paper. The timing function is modified so that it zero point at the transition of PAM signals, that results in remarkable reduced timing jitter. The performance of the proposed algorithm is analyzed and compared to that of Garner's one. Finally, analytical results are verified by computer simulation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.2
• /
• pp.326-332
• /
• 1996

In this paper, a method to design the sending loudness rating(SLR) is proposed and the desirable transmission characteristics are considered in order to specify the transmission quality, based on the loudness ratings, for the digital telephone system that is a terminal for digital speech communication. To specify the desirable SLR for digital telephone system, the subjective test defining the preferred range of inout level for CODEC was performed. From the test results, it was identified that the optimal input level for CODEC is -15dB and the range not to cause the quantization noise and the distortion of CODEC fall within -12dB and -18dB.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.8-13
• /
• 2008

Noise in homogeneous extrinsic semiconductor samples is calculated due to distributed diffusion noise sources. As the length of the device shrinks at a fixed bias voltage, the ac-wise short-circuit noise current shows excess noise as well as thermal noise spectra. This excess noise behaves like a full shot noise when the channel length becomes very small compared with the extrinsic Debye length. For the first time, the analytic formula of the excess noise in extrinsic semiconductors from velocity-fluctuation noise sources is given for finite frequencies. This formula shows the interplay between transit time, dielectric relaxation time, and velocity relaxation time in determining the terminal noise current as well as the carrier density fluctuation. As frequency increases, the power spectral density of the excess noise rolls off. This formula sheds light on noise in nanoscale MOSFETs where quasi-ballistic transport plays an important role in carrier transport and noise.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.3
• /
• pp.30-36
• /
• 2004

As fiber reinforced composite materials are widely used in aircraft, space structures and robot arms, the study on the non-destructive testing methods of the composite materials has become an important research area for improving their reliability and safety. In this paper, the AE signal analyzer with the resonance circuit to extract the specified frequency of the acoustic emission signal were designed and fabricated. The noise levels of the fabricated AE signal analyzer by the disturbance such as impact or mechanical vibration had a very small value comparable to those of the conventional AE signal analyzer. Also, the fabricated AE signal analyzer was proved to have about the same crack detection capabilities with the conventional AE signal analyzer under the static and dynamic tensile tests of the composite materials.

• The Journal of the Acoustical Society of Korea
• /
• v.8 no.4
• /
• pp.29-38
• /
• 1989

Detection of an underwater target by acoustic wave raises various difficulties due to unpredictable noise interference which originates from clutter, reverberation, and variations of medium characteristics with time and location. The SNR and the range resolution of conventional SONAR systems using a matched filter are generally poor, since the latter is optimum only in the additive white noise case. Furthermore, it cannot compensate for variations of the detection level which are responsible for the resultant detection errors. In this paper, the unpredictable interferences are compensated for by using an adaptive filter. It recursively estimates the channel impulse response based on the received echo signal. In the low noise environments, the estimated impulse response is close to the true one, providing a good range resolution, and a matched filter is used subsequently for the purpose of detection. It is shown through computer simulation that good performance can be achieved via the two steps of filtering. Also, the detection level remains unchanged without any additional provisions. Finally, we present the characteristics of the employed adaptive filter parameters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1465-1471
• /
• 2007

The electro-magnetic wave propagates through the air in the terrestrial communications, but the acoustic wave propagates through the seawater in the underwater acoustic communication(UAC). It makes the differences between the UAC link and the well hon air communication links. In this paper, we have studied path loss, absorption and ambient noise of the ocean as a medium for UAC. We have analyzed the absorption coefficient and ambient noise level of the coastal area of South Korea and suggested a strategy for the selection of the frequency band by considering the absorption coefficient and ambient noise level. Also, we present an illustrative example of a link budget for the QPSK UAC system which has carrier frequency 25kHz, bit rate 10kbps, range 1km and BER $10^{-3}$ in the shallow water environment with an ideal AWGN assumption.