• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.152-158
• /
• 2008

In shallow water environment, the detection performance of an active sonar using matched filter with LFM(linear frequency modulation) pulse can be seriously degraded by reverberation which is considered as non-white noise. To reduce the effect of reverberation, a whitening filter preceding the matched fitter, is usually adopted. In the conventional pre-whitening filter, it is assumed that local stationarity is preserved between detection block and its right ahead block. And then by using the characteristics of the reverberation of preceding block, the reverberation of detection block is estimated and whitened. According to the environment of shallow water, the stationarity of reverberation may be preserved for more blocks. In this case, the reverberation of the detection block can be estimated more accurately if more blocks are used. In this paper, the real reverberation signal which is obtained from shallow sea is analyzed and its proper region of estimation block is examined. And the performance of pre-whitening matched filter is compared and analyzed according to the region of estimation block.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2006.05a
• /
• pp.111-114
• /
• 2006

비백색잡음(non-white noise)인 잔향(reverberation)이 신호탐지(signal detection)의 주 방해신호인 천해 능동소나(active sonar) 환경에서의 표적탐지는 선백색화기(pre-whitening filter)를 사용하여 수신신호를 백색화한 후 백색잡음에서 최적 탐지기(optimum detector)인 정합필터를 사용한다. 그러나 이 방법은 잔향이 비정상(non-stationary) 특성을 가지기 때문에 구현이 매우 힘들다. 기존의 연구에 따르면 이러한 잔향은 지역적 정상상태(local stationary)라고 가정할 수 있다. 본 논문에서는 먼저 잔향신호의 지역적 정상상태의 범위를 추정(estimation)하고, 이 추정을 바탕으로 천해와 같은 비백색 잔향신호 환경에서 선백색화 블럭 정규화 정합필터(pre-whitening block normalized matched filter)의 성능을 개선할 수 있는 선백색화 기법을 제안하였다. 제안된 잔향신호의 백색화 기법은 표적신호 전 후의 잔향신호를 사용하여 처리블록(processing block)을 백색화하기 때문에 기존의 백색화 기법보다 우수한 성능을 보였다. 제안된 백색화 기법을 이용한 탐지기의 성능을 평가하기 위해 우리나라 인근해역에서 실측된 데이터를 이용하여 컴퓨터 모의실험을 수행하였다. 모의실험 결과 제안된 기법을 사용한 탐지기는 기존의 백색화 기법을 사용한 탐지기보다 우수한 탐지성능을 보였다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.3
• /
• pp.15-19
• /
• 2006

In shallow water active sonar environment, reverberation which is a non-white noise is one of the main source of performance degradation of target detection. In this case, the received signal is whitened before applying matched filter known as an optimum filter in the presence of white noise. However implementation of this method is very difficult because of the non-stationary characteristic of reverberation. Traditionally reverberation is assumed local stationary. In this paper, we estimate a range of stationary of reverberation signal, and then propose a pre-whitening method which improve the performance of pre-whitening block normalized matched filter in presence of non-white reverberation noise. Proposed whitener shows better whitening performance than traditional whitener because it use later as well as before reverberation of target signal. To evaluate performance of the proposed whitener, an actual measurement data sampled at the East-Sea is used for computer simulation. The target detector with new whitener is shown better performance than detector with traditional whitener.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.5
• /
• pp.345-352
• /
• 2017

We propose a methods which is reducing direction estimation error of sound source in the reverberant and noisy environments. The proposed algorithm divides speech signal into voice and unvoice using VAD. We estimate the direction of source when current frame is voiced. TDOA (Time-Difference of Arrival) between microphone array using the GCC-PHAT (Generalized Cross Correlation with Phase Transform) method will be estimated in that frame. Then, we compare the peak value of cross-correlation of two signals applied to estimated time-delay with other time-delay in time-table in order to improve the accuracy of source location. If the angle of current frame is far different from before and after frame in successive voiced frame, the angle of current frame is replaced with mean value of the estimated angle in before and after frames.