• KOMUNHWA
• /
• no.64
• /
• pp.75-107
• /
• 2004

The Noeun-dong Paleolithic site located at the construction area of Daejeon World Cup Stadium, has been excavated two times between 1998 and 1999. The site is situated at 60-75m above sea level on a gentle slope. According to the absolute dating results a

• Conservation Science in Museum
• /
• v.22
• /
• pp.1-14
• /
• 2019

The excavation of the south mound of Hwangnamdaechong Tomb in Gyeongju has yielded diverse types of shell artifacts. Among the them, this paper investigated fragments of shell ornaments with gilt-bronze frames, the use of which has not been identified. It was revealed that the artifacts are in fact nautilus cups, which had never been found previously in excavations in Korea. A nautilus is a species marine mollusk known to be the closest to prehistoric ammonites. It has brown stripes on the surface of the shell and septa inside, and a siphuncle penetrating to the center of the septa. It is known that nautilus cups were made and used in China, but only three examples have thus far been identified. These surviving cups have metal ornaments and are dated to the Western and Eastern Jin periods of China. No nautilus cups have been found in Japan, and the shell ornaments investigated in this study were determined to be the first nautilus cups ever found in Korea. Nautilus cups are mentioned in ancient documents and literature, including in poems by the Tang Dynasty poet Li Bai and in Joseon-period documents. This paper presents the biological characteristics of nautili, cases of excavation of nautilus cups outside Korea, and findings from the basic research of the nautilus cup from Hwangnamdaechong Tomb.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.625-630
• /
• 1995

In order to know the effects of hot-water extracts of starches on gel formation and gel properties, some physicochemical properties and molecular distribution of the extracts were measured. Also, after acid-hydrolysis of starch gels and extract gels, extent of hydrolysis and $\overline{D.P}._n$, and molecular distribution of hydrolysis-residue were measured. Extraction ratio of grain starches (buckwheat, corn, rice, and wheat) were $4.0{\sim}6.6%$. The ratio of acorn and mungbean starches were 11.7 and 13.5%, respectively. Iodine affinity of the extracts was $17.2{\sim}17.7%$ in starches using for Mook, SM(acorn, buckwheat, and mungbean), $13.7{\sim}14.9%$ in starches not using for Mook, SNM(corn, rice, and wheat). Blue value was also higher in SM than in SNM. $\overline{D.P}._n$. of extracts of SM were bigger than those of SNM. In molecular distribution experiment, amylopectin fraction was not found from the extracts except rice starch extract. The extent of acid hydrolysis of the starch gels were $70{\sim}84%$ after 60 days, and the extent of the extract gels were $22{\sim}35%$. The extent of hydrolysis of starch gels and extract gels made with SM were lower than those of SNM.

• Journal of Biosystems Engineering
• /
• v.33 no.2
• /
• pp.136-141
• /
• 2008

Fecal contaminations on poultry carcasses, not easily discemable by human eyes, are potential harbor sites of pathogenic Escherichia Coli (E. coli O157:H7). Development of sensitive detection methods for fecal contamination is essential to ensure safe production of poultry products. Fluorescence has been shown to be very sensitive in detecting fecal and other biological substances that can harbor pathogens. In this study, fluorescence excitation-emission spectra of poultry fecal matter were compared with spectra for poultry skin and meat. Results indicated that the combinations of fluorescence intensities at the wavelength of 520 nm, 579 nm, 625 nm, and 635 nm with 411 nm excitation showed above 97% accuracy for differentiation of the contaminants from poultry tissues. Excitation and emission bands determined could be used for constructing a real-time fluorescence imaging device for detection of harmful residues on poultry carcasses.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.653-654
• /
• 2006

In case of ultrashort laser ablation of metals, the transfer of energy from the electronic system causing strong absorption of laser light to the lattice needs relaxation times of the order of some picoseconds. Under the above theoretical background, nickel was ablated using femtosecond, picosecond and nanosecond laser. As a result, nickel ablation by picosecond laser and femtosecond laser, which are called ultrashort laser, has similar machinability because of relaxation time of metals, whereas nanosecond Nd:YAG laser has lower absorption, higher thermalization effect in comparison with ultrashort laser.

• Journal of Chest Surgery
• /
• v.28 no.10
• /
• pp.939-941
• /
• 1995

Congenital esophageal stenosis due to tracheobronchial remnants is one of main forms of congenital esophageal stenosis.A 19-month-old male was presented an appearence of underdevelopment and mild dehydration state due to persistent vomiting since 5 months after his birth. Esophagogram revealed an abrupt narrowing of lower esophagus with dilatation above it. The operation method was aesection of esohageal stenosis and end to end anastomosis through left seventh thoracotomy. The postoperative course was uneventful.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.1
• /
• pp.33-40
• /
• 1992

Several etching phenomena were observed and analyzed in diaphragm process performed on 4-inch (100) Si wafers for sensor application. In case of deep etching to above 300$\mu$m depth, the etch-defects appeared at etched surface could be classified into three categories such as hillocks, reaction products, and white residues. It was known that the hillock had a pyramidal shape or trapizoidal hexahedron structure depending on the density and size of the reaction products. The IR spectra showed that the white residue, which was due to the local over-saturation of Si dissolved in solution, was mostly Si-N-O compounds mixed with a small amount of H and C etc. Also, the difference in both the existence of etch-defects and etch rate distribution over a whole wafer was investigated when the etched surfaces were downward, upward horizontally and erective in etching solutions. The obtained data were analyzed through flow pattern in the etching bath. As the results, the downward and erective postures were favorable in the etch rate uniformity and the etch-defect removal, respectively.

• Electrical & Electronic Materials
• /
• v.9 no.2
• /
• pp.188-195
• /
• 1996

The AlSi etching process using the MERIE type reactor carried out with different process parameters such as C1$_{2}$ and N$_{2}$ gas flow rate, RF power and chamber pressure. The etching characteristics were evaluated in terms of etch rate, selectivity, uniformity and etched profile. As the N2 gas flow rate is increased, the AlSi etch rate is decreased and uniformity has remained constant within .+-.5%. The etch rate is increased and uniformity is decreased, according to increment of the C1$_{2}$ gas flow rate, RF power and chamber pressure. Selective etching of TEOS with respect to AlSi is decreased as the RF power is increased while it is increased by increment of the C1$_{2}$ gas flow rate and chamber pressure, on the other hand, selective etching of photoresist with respect to AlSi is increased by increment of the C1$_{2}$ gas flow rate and chamber pressure, it is decreased as the N$_{2}$ gas flow rate is increased.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.747-750
• /
• 2007

This study proposes that chlorine residue after metal etch as the source of metal corrosion, and charges should be removed by optimizing etch, PR strip and cleaning condition. Charges distributed along the metal line acts as a source of tungsten (W) plug corrosion when associated with following cleaning solution. In cleaning process after metal etch and PR strip, chemical selection is significantly important in terms of metal corrosion. Optimal corrosion preventive PH, no metal attack (choice of optimal inhibitants), high by product removal efficiency and optimal de ionized water treatment condition is critical to the metal corrosion prevention.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.12 no.1
• /
• pp.1-7
• /
• 2013

This article provides an overview of the current concepts regarding anterior cruciate ligament reconstruction, including anatomy, biomechanics, operative techniques and clinical results. Many techniques have been introduced for ACL reconstruction: single bundle reconstruction, remnant preserving augmentation, and double bundle reconstruction. Each technique has its strong and weak points, and it is not sure which technique is superior than others. It is considered to suggest that rather than to select the same method of surgery in all patients, select the method of reconstruction depending on the characteristics of the individual patient, the state of the residual ligaments and extent of the damage.