• 대한조선학회논문집
• /
• 제32권3호
• /
• pp.107-115
• /
• 1995

본 연구에서는 선체 구조설계자가 초기설계단계에서 선각거어더의 최종 또는 잔류 종강도를 쉽게 평가할 수 있는 시스템을 SUN4 워크스테이션의 Open-Window상에 구축하였다. 즉, 현재 기본적으로 이루어지고 있는 탄성 단면계수 계산을 위한 입력정보만을 사용하여 최종 종강도 계산이 가능하도록 하기 위하여 최종종강도를 평가할 수 있는 기존의 여러 방법들을 살펴보고, 실선과 모형 Box-Girder들의 수치해석 및 실험결과들에 적용하여 비교적 유용한 방법을 선정하였다. 선정된 식 및 조사된 몇가지 식을 선각 거어더의 탄성 또는 완전소성단면계수 계산과정과 연결하여 선체가 건전한 상태(Intact Condition) 혹은 좌초나 충돌등에 의하여 손상을 받았을 때(Damaged Condition)의 최종 또는 잔류강도를 계산할 수 있게 하였다. 또한 사용자의 편리를 위하여 이 흐름을 마우스버튼을 사용하는 화면운용체계하에서 작업이 이루어지도록 구성하였으며, 3차원 그래픽환경을 구축하여 종강도 구조부재의 만성 또는 완전소성 응력상태를 제시하게 하였다. 마지막으로 개발시스템은 여러 형태의 실제 건조선박(약 20척)에 적용하여 최종 종강도평가를 수행하고 그들 분포특성 및 구조가 취약한 선박등을 파악하였으며, 설계 종굽힘모우먼트에 대해 새깅 및 호깅상태 모두 평균적으로 약 2배가 되는 최종 종굽힘모우먼트를 가지고 있음을 확인하였다.

• 대한조선학회논문집
• /
• 제28권1호
• /
• pp.139-149
• /
• 1991

본연구에서는 이상화구조요소법(理想化構造要素法)을 적용하여 선체구조(船體構造)의 최종(最終) 종강도(縱强度)를 효율적으로 해석할 수 있는 방법을 개발하였다. 이를 위해 2축방향 축력을 받는 판요소(板要素)에 대한 이상화판요소(理想化板要素)를 초기처짐과 잔류응력의 영향 및 국부구조와 전체구조간의 상관효과를 고려하여 정식화하였다. 본 해석법을 이중선각구조(二重船殼構造)로 된 4만톤급 정유운반선(精油運搬船)에 적용하여 초기처짐, 잔류응력 및 재료의 항복응력의 변화에 따른 선각(船殼)거어더의 최종(最終) 종강도(縱强度)를 해석하고, 이들 결과를 바탕으로 종강도(縱强度)측면에서의 잉여강도계수(剩餘强度係數) 및 신뢰성지표(信賴性指標)를 평가하였다.

• 대한조선학회논문집
• /
• 제49권2호
• /
• pp.124-131
• /
• 2012

This paper provides prediction of ultimate longitudinal strengths of hull girder of a VLCC considering probabilistic damage extents due to collision and grounding accidents based on IMO Guideline(2003). The probability density functions of damage extents are expressed as a function of nondimensional damage variables. The accumulated probability levels of 10%, 30%, 50%, and 70% are taken into account for the damage extent estimation. The ultimate strengths have been calculated using in-house software UMADS (Ultimate Moment Analysis of Damaged Ships) which is based on the progressive collapse method. Damage indices are provided for all heeling angles due to any possible flooding of compartments from $0^{\circ}$ to $180^{\circ}$ which represent from sagging to hogging conditions, respectively. The analysis results reveal that minimum damage indices show different values according to heeling angles and damage levels.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 춘계학술대회 논문집
• /
• pp.95-95
• /
• 2000

• 대한조선학회논문집
• /
• 제48권3호
• /
• pp.246-253
• /
• 2011

This paper presents estimation of deterministic damage extents and locations due to collision and grounding which are defined by ABS guideline and DNV ship rules. It is noted that the overall extents of damages from DNV are larger than those from ABS. Nonlinear FEAs are carried out to predict residual longitudinal strength of hull girder with asymmetric severe damages. The accuracy of the applied FEA procedure is proved by comparing FEA result with test result of a 1/3-scaled frigate. The investigated vessels are a VLCC and a large-sized bulker for which evenly distributed heeling angles from $0^{\circ}$(sagging) to $180^{\circ}$(hogging) by $30^{\circ}$ due to damage-induced flooding are taken into account. The reduction ratios of the ultimate residual strength for the damaged cases to those for the intact sagging case are shown. It is proved that the grounding damage case under DNV assumption reveals most critical the residual strength. The design formulas are presented to assure minimum residual ultimate moment after damage.

• 대한조선학회논문집
• /
• 제48권3호
• /
• pp.281-287
• /
• 2011

This paper explains the basic theory and a new development of for the residual strength prediction program of the asymmetrically damaged ships, being capable of searching moment-curvature relations considering neutral axis mobility. It is noted that moment plane and neutral axis plane should be separately defined for asymmetric sections. The validity of the new program is verified by comparing moment-curvature curves of 1/3 scaled frigate model where the results from new algorithm well coincide with experimental and nonlinear FEA results for intact condition and with nonlinear FEA results for damaged condition. Applicability of new algorithm is also verified by applying VLCC model to the newly developed program. It is proved that reduction of residual strengths is visually presented using the new algorithm when damage specifications of ABS, DNV and IMO are applied. It is concluded that the new algorithm shows very good performance to produce moment-curvature relations with neutral axis mobility on the asymmetrically damaged ships. It is expected that the new program based on the developed algorithm can largely reduce design period of FE modeling and increase user conveniences.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1371-1375
• /
• 2005

The paper has analyzed the influence of tire design variable on the tire Force and Moment (F&M) characteristics, especially by the belt angle, the Plysteer Residual Aligning Torque (PRAT) which is considered as one of the causing factors for the vehicle pull. To validate the tire FE model, the tire stiffness and the PRAT which can be derived from the simulation data have been compared with the experimental data of test machine. In addition to PRAT characteristic, the tire stiffness and cornering characteristics due to the belt angle have been investigated. The effects of drum's curvature on the PRAT have been also investigated using the tire FE model and the usefulness of the current drum type F&M test machine can be confirmed.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.104-112
• /
• 2006

The influence of tire belt angle on the Plysteer Residual Aligning Torque(PRAT) and the cornering stiffness by the FEM has been studied. The PRAT is a performance factor of the tire about vehicle pull, and the cornering stiffness has relation to vehicle steering response of outdoor test. To validate FE model for analysis, simulation data for both the static stiffness(vertical, lateral) and the PRAT have been compared with the experimental data. In addition to the characteristics of the PRAT and the cornering stiffness due to the tire belt angle, rolling and cornering contact characteristics have been studied. The tendency of the PRAT and the cornering stiffness due to the belt angle can be used as a guide line for the tire design in relation to vehicle pull and vehicle steering response.