• Journal of the Korean Magnetics Society
• /
• v.12 no.2
• /
• pp.57-63
• /
• 2002

In order to increase the magnetic properties of a Nd-Fe-B sintered magnet, the general factors including particle size and its distribution, volume fraction of Nd$_2$Fe$_{14}$B phase, degree of alignment of Nd$_2$Fe$_{14}$B grain, oxygen content and grain size etc. should be optimized by controlling the composition of Nd-Fe-B alloy as well as the manufacturing process. In this study, fabrication of the Nd-Fe-B sintered magnet was carried out in a laboratory scale by controlling the composition of Nd-Fe-B alloy and the manufacturing process. The optimum milling condition was found by investigating the milling media, milling time and ball size. The addition of FeGa was effective to increase the coercivity of the Nd-Fe-B sintered magnet. A remanence of 14.4 kG, a coercivity of 9.4 kOe and a maximum energy product of 47 MGOe were obtained from the sintered magnet.

• Journal of the Korean Magnetics Society
• /
• v.5 no.1
• /
• pp.34-37
• /
• 1995

$Nd_{x}Fe_{77}B_{23-x}(x=4,\;6,\;8,\;11,\;13)$ alloys were prepared by rapid quenching technique. They were crystallized at higher than $650^{\circ}C$ and subsequently the magnetic properties were investigated The melt-spun alloy of x=8 consisted of nearly single metastable compound $Nd_{2}Fe_{23}B_{3}$ and showed the soft magnetic property. In $8{\leq}x{\leq}13$ alloys, the coercivities were increased according to the increase of Nd content but the remanences decreased. In $4{\leq}x{\leq}6$ alloys, the coercivities and the remanences were increased by lowering Nd content. In x=4 alloy, the ratio of soft to hard magnetic phase was 70:30 and the energy product was $96kJ/m^{3}(12MG.Oe)$.

• Journal of the Korean Magnetics Society
• /
• v.2 no.1
• /
• pp.44-49
• /
• 1992

Magnetic properties and microstructures of $Nd_{12}Fe_{80}B_{6}(Nb,\;M)$ (M=Ti/Cu/Ga) melt-spun ribbons prepared by single wheel technique have been studied. The results of microstructural study have shown that Ga is effective for the orientation of c-axis normal to the ribbon plane. The Ga-added melt-spun ribbon, $Nd_{12}Fe_{80}B_{6}(Nb,\;Ga)$, quenched at $V_{s}=17.9\;m/s$ was mostly composed of fine grains of about 30 nm in size with the textured free-side surface. The powder of this ribbon aligned in mag-netic field showd a high remanence of 0.87 T which was about 5 % higher than that of ribbon itself. It is believed that there is a possibility to fabricate a new type of HIREM melt-spun ribbon with highly textured free-side surface.

• Journal of the Korean Magnetics Society
• /
• v.6 no.2
• /
• pp.80-85
• /
• 1996

An externally applied magnetic field during annealing the $Nd_{2}Fe_{14}B/Fe_{3}B$ based spring magnet was found to enhance the exchange coupling between the hard and soft magnetic grains. More than 30 % increase in remanence values for melt-spun $Nd_{4}Fe_{73.5}Co_{3}(Hf_{1-x}-Ga_{x})B_{18.5}$(x=0, 0.5, 1.0) alloys was resulted from uniform distribution of $Fe_{3}B$, $\alpha$-Fe as well as $(Nd_{2}Fe_{14}B)$, and also from reduced grain size of those phases by 20 %. The result also showed that there is an optimum grain size exhibiting a high coercivity value which will be discussed in terms of previously simulated exchange coupling parameter.

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.306-314
• /
• 1990

SrO-5.7Fe$_{2}$O$_{3}$의 Magnetoplumbite형 Sr페라이트에 첨가제 SiO$_{2}$, H$_{3}$BO$_{3}$CaCO$_{3}$, SrCO$_{3}$을 0.1-0.1wt%로 변화시켜 만든 등방성과 이방성의 자기이력곡선, 밀도, 감자곡선, 고유보자력 및 미세구조특성에 미치는 영향을 조사하였다. 위 첨가제는 페라이트 생성 및 특성개선에 효과적이었도 특히 등방성에서의 입도크기를 3.5.mu.m에서 1.7.mu.m로 하였을때 소결온도가 40.deg.C 낮은 1220.deg.C에서 잔류자속밀도가 2300G, 보자력이 1950Oe, 밀도가 4.51g/Cm$^{3}$, 교유보자력이 3500Oe로 각각 증가하였다. 이방성은 등방성 보다 원등히 우수하였고 최대에너지적 (BH)$_{max}$이 소결온도가 10.deg.C 낮은 1210.deg.C에서 1.13으로 부터 3.3MGOe로 증가하였다. 이값은 이론치의 61%에 도달하고 있다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.5
• /
• pp.179-186
• /
• 1996

The magnetic fibrous polymeric oil filter for automotive was obtained by pneumoextrusion processing prepared from thermoplastic polymer(polyamide) containing magnetic particulate filer (Ba ferrite), and treated subsequently in a magnetic fields. Using an oil filter tester and particle quantifier, the dependence of filtrational characteristics of the magnetic oil filter on the parameters of mean pore sizes and magnetic properties were analyzed. Also experimental engine-bed test of oil filters was investigated. The magnetic fibrous polymeric filter was shown to possess a highly filtration efficiency in filtering the fine metal particles with increasing the magnetic force of filter element. In this study, we knew that efficiency of magnetic fibrous polymeric filter was dependent on the magnetic strength of the filter elements.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.997-998
• /
• 2011

본 논문에서는 영구자석 동기전동기의 영구자석 평균온도를 다이나모 시험을 통해 얻어진 토크 데이터로부터 간접적으로 계산하는 방법이 제시된다. 특히 영구자석의 온도에 따른 잔류자속밀도 변화에 자기 포화 효과를 고려하여 다양한 운전점에서의 온도추이를 간단하고 정확히 계산할 수 있다.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.29-31
• /
• 2008

단상 유도형 동기전동기(Line-Start Permanent Magnet Motor: LSPM)는 기존의 단상유도기에 비해 높은 효율을 갖고 있어 가정에서의 주요 동력원으로 사용되고 있다. 그러나 기동 시 영구자석에 의한 Braking toruqe의 발생으로 인해 높은 기동토크를 필요로 하는 단점을 갖고 있다. 본 논문에서는 이러한 LSPM의 장점과 기동 시의 문제점 극복에 유리한 Written-Pole Motor (WPM)에 대해 소개하였다 또한 WPM의 보다 정화한 해석을 위해 WPM의 특징인 운전시 진행되는 영구자석 착자의 유한요소해석을 통해 영구자석의 잔류자속밀도를 계산하였으며 이를 바탕으로 WPM의 동기속도에서의 정특성 해석을 수행하였다.

• Resources Recycling
• /
• v.13 no.6
• /
• pp.31-36
• /
• 2004

This experiment was carried out to examine the effects of morphology on properties of La-Co substituted SrM ferrite. The magnetic properties of calcined and sintered materials were varried with the substitutional amount of La and Co elements in Sr-ferrite. In the substituted SrM ferrite, the atomic fraction x of La is directly related to the mole ratio n of iron oxide and the atomic fraction y of Co by equation x=2ny. The Hcj values of the calcined powder were about 270 kA/m and 240 kA/m with x=0.3 and x=0.2, respectively at stoichiometry, n=6.0. Crystallites of the sintered material were grown with a plate shape, and their size decreased with increasing mole ratios. Such a shape was caused by the initial state of crystallite formed after calcination. In case of x=0.3 and n=6.0, Br was 415 mT and Hcj was 355 kA/m, and in x=0.2 and n=6.0, Br was 410 mT and Hcj was 370 kA/m. The squareness in 2nd quarter of BH curve with x=0.2 was smoothly improved to compared with x=0.3.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2004.12a
• /
• pp.27-34
• /
• 2004

This experiment was carried out to examine the effects of morphology on properties of La-Co substituted SrM ferrite. The magnetic properties of calcined and sintered materials varied with the substitutional amount of La and Co elements in Sr-ferrite. In the substituted SrM ferrite, the atomic fraction x of La is directly related to the mole ratio n of iron oxide and the atomic fraction y of Co by equation x=2ny. The HcJ values of the calcined powder were about 270 kA/m and 240 kA/m with x=0.3 and K=0.2, respectively at stoichiometriy, n=6.0. Crystallites of the sintered material were grown with a plate shape, and their size decreased with increasing mole ratios. Such a shape was caused by the initial state of crystallite formed after calcination. In case of x=0.3 and n=6.0, Br was 415 mT and HcJ was 355 kA/m, and in x=0.2 and n=6.0, Br was 410 mT and HcJ was 370kA/m. The squareness in 2nd quarter of BH curve with x=0.2 was smoothly improved compared with x=0.3