• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.249-251
• /
• 2004

According to our fatigue tests carried out at 20 ㎐, R=0.1 on transversely butt-welded joints, fatigue strengths of as-welded specimens, that is, specimens having residual stress are higher than those of annealed specimens in short hie range, but vice verse in long life range. This behavior seems to be concerned mainly with residual stress relaxation by applied loading. After analyzing the welding process, we conducted finite element analysis to quantify the degree of residual stress relaxation. By taking into account residual stress relaxation, modified Goodman diagram, and nominal stress, we evaluated the fatigue life of the welded joint from the S-N curve for the parent material. The estimated results are in a good agreement with the experimental results.

• 산업기술연구
• /
• 제26권A호
• /
• pp.69-73
• /
• 2006

Mach peening treatment is one of the various kinds of techniques to improve the fatigue properties. The mach peening process gives high-level work hardening and compressive residual stress near the surface layer, improving the fatigue strength. In addition, this treatment reduces slip bands that initiate the fatigue cracks near the surface. During impingement, a plastic indentation surrounded by a plastic zone is formed. Mach peening treatment characteristic is less energy consumption and is an environmental friendly processing methods that is not accompanied by pollution. It is machining process that can prevent fatigue fracture beforehand in structure using already as well as process of production. The test results showed that fatigue crack propagation delay appeared by drilling type 43%, mach peening type 110%.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.80-88
• /
• 2001

The spot welding method has been used in the joining of structures, automotive body, railway carriage, aircraft, household electric appliances, precision parts etc., because of brief working, easy automation, available mass production, and convenience. In this paper, the effects of welding conditions on the fatigue life and the prediction of fatigue life based on fracture mechanics theory of spot welded joint were investigated. Fatigue tests were conducted with the tensile-shear specimens welded in the various current using cold rolled steel sheets. Fatigue life of spot welded joint was predicted and compared with experimental results. Using FEM(finite element method), we analysed the distribution of stress and the condition of deformation on the environments of nugget.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.39-44
• /
• 1995

The gas nitro-carburizing treatment with the merits of carburizing and nitriding treatment is recently applied to transmission gears. the shafls of an engine oil pump and steering shafls. For all that, the researches of the gas nitro-carburizing treatment are short of the fatigue behavior and the evaluation of fatigue life. In this paer, it is examined for the effect of inclusions and hole defects with fatigue limit and the evaluation of the fatigue strengthaccording tothe hardness and resifualstress with the specimen of a notro-carburizing treatment.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.129-135
• /
• 2003

The fatigue life of a structure can be enhanced by improving the mechanical and metallurgical aspects to strengthen the material around regions of high stress. Coldworking of holes in structures is one of the mechanical methods of strengthening material. The material for this research is A12024-T351 which is used for the primary member or aircraft. Specimens were tested under constant amplitude loading and residual stresses measured by X-ray diffraction technique. Fatigue crack initiation life was evaluated by a strain-life equation which was considered initial residual stress and residual stress relaxation exponent as a function of the strain amplitude. The predictions on fatigue crack initiation life were compared with experimental results. A wide range of discrepancies between them was found.

• 대한기계학회논문집A
• /
• 제25권10호
• /
• pp.1590-1596
• /
• 2001

The shot peening process is most often used to improve fatigue properties of metal parts. The single most critical parameter of the shot peening process is the shot ball itself. Without the correct quality media, all other shut peening parameters are extraneous and the desired fatigue improvement and consistency of improvement will not be achieved. Shot peening involves modifications of the surface and subsurface condition of a material that can be described by the change of the residual stresses, the hardness, and the surface roughness. This Paper Presents the shot peening to optimize the shot ball parameters. The effect of shot peening parameter on the surface roughness, surface hardness and residual stress are investigated.

• 한국산업안전학회:학술대회논문집
• /
• 한국안전학회 2001년도 공동학술대회
• /
• pp.219-224
• /
• 2001

본 연구는 울진 원자력발전소 5＆6호기 Class 1680, Parallel Gate 16-inch, Motor Operated Valve (Valve ID No. SI-653 and 654)에 부착되는 Equalizing Bypass Pipe Line (EBPL)이 밸브 시스템에 발생시키는 진동하중에 의한 영향을 동적 피로안정성 관점에서 규명하기 위하여 수행된 것이다. Equalizing Bypass Line Part의 최종 설계된 형상을 Fig. 1에 나타내었다. 본 해석을 위하여 운용 중 발생되는 부착부의 잔류진동 레벨이 3축 방향 가속도로 측정되었다. 본 연구에서는 해당 시변 가속도 데이터를 바탕으로 정확한 시간-응력 이력을 얻기 위하여 시간영역에서 천이 진동해석 (Transient Vibration Analysis)을 수행하였으며, 이를 실제적인 피로해석에 활용하였다. 시간영역에서의 천이 진동해석 및 피로해석을 위해 상용유한요소 해석프로그램인 ANSYS (Version 5.6)를 활용하였다.(중략)

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 춘계 학술대회 논문집
• /
• pp.88-95
• /
• 2001

VR(Virtual Reality)의 개념이 제조공학 분야로 확대 적용되면서 설계분야에서의 가상조형 (Virtual Prototyping), 제조분야에서의 가상제조시스템(Virtual Manufacturing System)이라는 새로운 형태의 제조 시스템 및 설계기술이 차세대 제조기술로서 발전해 오고있으며 이런 가상제조방법(Virtual Manufacturing)은 컴퓨터를 이용하며 생산과정에서 제품뿐만이 아니라 유한요소해석을 유용하여, 공정까지도 모의실험을 하며 생산성(manufacturability), 최종 형태(final shape), 잔류 응력(residual stress), 제품 수명 주기(life-cycle)등과 같은 요소들의 최적화 정보를 제공하게 된다. 본 연구에서는 이러한 가상제조방법을 구현하기 위한 기초적 단계로서 가상단조기계를 가상현실기법을 이용하여 모델링하고 Java를 이용하여 모델링된 단조기계를 제어하고 제조되는 단조물에 대한 내부 응력 및 형태변환을 유한 요소법을 이용하여 분석하고 분석된 단조물의 자료를 WEB상을 통하여 닥 수 있게 유한 요소 해석결과를 VRML언어로 변환하는 작업을 수행하였다.

• 기계저널
• /
• 제28권4호
• /
• pp.322-327
• /
• 1988

용접구조물의 파괴는 단순 역학적인 차원을 넘어서 재료공학적 검토와 시공상의 각종 변수를 고려해야만 정확하게 이해할 수가 있으며 방지할 수 있다. 용접도중에 발생되는 미소파괴(균열) 는 적절한 재료의 선정과 적당한 시공법으로 해결할 수 있으며, 사용도중 발생되는 거시적 파 괴는 사용조건에 유의하고 발생된 용접결함을 제거할 수 있다면 방지할 수 있다. 결론적으로 용접구조물의 파괴는 용접도중에 결함을 발생시키지 않는 방법으로 방지하는 것이 가장 효과적 이기 때문에 시공법의 선정 및 실시는 충분한 검토와 주의가 필요하다. 용접품의 파괴현상을 해석하는 데는 현재까지 잘 연구되어진 각종 파괴역학적 및 피로역학적 해석이 적용될 수 있 으나 용접부의 불균일한 조직형성에 따른 기계적 성질의 불균일성과 잔류응력 등을 추가로 고 려해야 하는 것이 약간 다를 뿐이다. 현재 용접부의 취성 및 피로파괴에 대한 다방면의 연구가 활발하게 이루어지고 있는 형편이며 향후에는 용접구조물의 수명예측을 포함한 가족 파괴해석 기술이 확립될 것으로 생각된다.

• 한국안전학회지
• /
• 제10권2호
• /
• pp.120-128
• /
• 1995

The fatigue failure of rail is a principal source of derailment accidents. The reduction of fatigue failures can be achieved by Intensive track maintenance and periodic safety assessments for the railway. For the safety assessments, it is required to have more accurate knowledge for fatigue behavior such as the crack initiation, propagation, crack growth rate and the remaining service life in rail. In this paper, the mean stress effects for the fatigue behavior of rail steel are studied. For this study, the fatigue test is conducted and some equations for fatigue evaluation are applied and compared. From the results, we can see that the fatigue crack growth rate is the more increased as the men stress Is the more increased, the mean stress effect is represented well by the combination of stress intensity factor range and maximum stress intensity factor and Crooker and Range's equation represented by ${\Delta}K, K_{max}$ is the best fit for fatigue evaluation and safety assessment of rail.