• The Journal of the Petrological Society of Korea
• /
• v.6 no.3
• /
• pp.226-243
• /
• 1997

The Odesan Gneiss Complex consists of mainly migmatitic gneiss and porphyroblastic gneiss with locally intercated quartzite, amphibolite, marble and leucocratic gneiss. At least two different regional metamorphisms are recognized in the study area. Metamorphic grade of the first metamorphism increases from the K-feldspar-muscovite zone(in which biotite-muscovite-plagioclase-quartz and garnet-biotite-muscovite-K-feldspar-plagioclase-quartz assemblages occur) in the east and southwestern part of the study area to the K-feldspar-garnet zone(in which garnet-biotite-K-feldspar-plagioclase-quartz, biotite-K-feldspar-plagioclase-quartz, garnet-biotite-K-feldspar-plagioclase-sillimanite-spinel-quartz assemblages occur) in the northwestern part. Kyanite is found as inclusions in plagioclase. The second metamorphism is characterised by occurrence of cordierite. The metamorphic grade of 2nd metamorphism decreases radically from the central-western part near Gaeinsan in which cordierite-garnet-sillimanite-biotite-muscovite-quartz, cordierite-garnet-spinel-sillimanite-biotite-muscovite-quartz assemblages representing the garnet-cordierite zone are observed. The garnet-cordierite zone is surrounded by the sillimanite-cordierite zone which shows cordierite-sillimanite-biotite-plagioclase, cordierite-muscovite-biotite-plagioclase and sillimanite-muscovite-biotite-plagioclase assemblages. The peak metamorphic P-T conditions of the first metamorphism calcuted from garnet-biotite-sillimanite-K-feldspar-plagioclase-spinel assemblage are 5.4~7.4 kb and $776-789^{\circ}C$. Real P-T condition of the first metamorphism might be higher than the calcuated P-T condition according to the study based on the phase equilibria. P-T conditions calcuated from the garnet-biotite in plagioclase are 12.5kb and $650^{\circ}C$ which indicate that the P-T path of the first metamorphism had passed a high pressure condition before the peak metamorphic temperature condition. The peak metamorphic P-T conditions of the second metamorphism calcuated from garnet-biotite-cordierite-spinel-quartz assemblage are $680~750^{\circ}C$ at pressures lower than 6 kb. In the Odesan Gneiss Complex, the first metamorphism of medium pressure and high temperature had occurred after the high pressure condition and fast uplift and then the second metamorphism of low pressure condition occurred after sedimentation of the Kuryong Group.

• Electric Engineers Magazine
• /
• v.251 no.7
• /
• pp.24-27
• /
• 2003

전열기 및 전기의 발열작용을 이용한 전기기기에는 정격용량 및 허용용량에 맞는 저항기 및 온도제어장치를 이용하여 전기사용기기에 허용전류이상 또는 허용용량 이상의 전류가 흐르지 못하게 하는데 이들 저항기 및 온도제어장치 고장 및 구조적 결함으로 과부하 형태가 나타날 수 있다.

• Magazine of the Korea Concrete Institute
• /
• v.4 no.3
• /
• pp.101-111
• /
• 1992

매스콘크리트 구조물에서의 시멘트 수화열은 구조물의 균열을 발생시킬 만큼 큰 내부온도를 발생시킨다. 따라서 매스콘크리트 구조물에서의 설계와 시공단계에서 내부온도응력을 예측할 수 있다면 이와같은 균열로 인한 구조물의 피해를 예방할 수 있을 것이다. 그리고 수화열에 의한 온도증가는 타설초기에 발생하므로 크리이프에 의한 영향도 매우크다. 따라서 온도응력해석시 크리이프와 건조수축의 영향을 고려하는 것이 구조물의 안전성과 사용성을 정확히 파악하는데 필요하다. 본 연구는 먼저 매스콘크리트의 온도이력을 유한요소법에 의해 해석하고, 작용하중이나 온도이력을 크리이프와 건조수축영향을 고려하여 콘크리트 구조물의 응력과 변형을 유한요소법에 의해 계산하였다. 본 연구에서 온도이력 계산과 콘크리트구조물의 응력과 변형의 계산을 위해 작성한 프로그램 결과를 실제 구조물의 실험결과와 비교하였을 때 양호한 결과를 얻었다.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.2003.1-2004
• /
• 2011

LED는 친환경 광원으로써 메탈램프에 비해 높은 광 변환 효율과 긴 수명을 갖고 있어 차세대 광원으로 널리 쓰이고 있다. 그러나 이러한 특성은 LED의 접합온도가 일정하게 유지 되어야 가능하다. 실제 LED는 PN접합으로 구성되어 접합온도가 상승될 경우 광 변환 효율의 저하, 색온도의 변화, 사용 수명의 감축을 야기 시키는 요소로 작용한다. 따라서 LED는 방열설계가 중요하며 방열설계가 제대로 되지 못한 경우에 대해서는 온도보상이 필요하다. 본 논문은 LED모듈에 접합온도를 LED업체에서 제공하는 그래프를 이용하여 간접적으로 추정하고 LED의 접합온도를 일정하게 유지 시키는 시스템을 제안하였다.

• Journal of the Korean Magnetics Society
• /
• v.17 no.2
• /
• pp.86-89
• /
• 2007

[ $FeCr_2Se_4$ ] prepared under the high pressure (3 GPa) has been studied with x-ray, neutron diffraction techniques, superconducting quantum interference device (SQUID) magnetometer, resistance, and Mossbauer spectroscopy. The temperature dependence of resistance is explained by Mott-VRH and small polaron model for the regions I (T<20 K) and II (T>42 K), respectively. Neutron diffraction results show an antiferromagnetic spin-lattice coupling near the Neel temperature. So finally the distance of atom is enlarged in region (110$FeCr_2Se_4$ shows convex type of temperature dependence.

• Nuclear Engineering and Technology
• /
• v.27 no.6
• /
• pp.811-824
• /
• 1995

The CANDU element bowing is attributed to actions of both the thermally induced bending moments and the bending moment due to hydraulic drag and mechanical loads, where the bowing is defined as the lateral deflection of an element from the axial centerline. This paper consider only the thermally-induced bending moments which are generated both within the sheath and the fuel and sheath by an asymmetric temperature distribution with respect to the axis of an element The generalized and explicit analytical formula for the thermally-induced bending is presented in con-sideration of 1) bending of an empty tube treated by neglecting the fuel/sheath mechanical interaction and 2) fuel/sheath interaction due to the pellet and sheath temperature variations, where in each case the temperature asymmetries in sheath are modelled to be caused by the combined effects of (i) non-uniform coolant temperature due to imperfect coolant mixing, (ii) variable sheath/coolant heat transfer coefficient, (iii) asymmetric heat generation due to neutron flux gradients across an element and so as to inclusively cover the uniform temperature distributions within the fuel and sheath with respect to the axial centerline. As the results of the sensitivity calculations of the element bowing with the variations of the parameters in the formula, it is found that the element bowing is greatly affected relatively with the variations or changes of element length, sheath inside diameter, average coolant temperature and its variation factor, pellet/sheath mechanical interaction factor, neutron flux depression factor, pellet thermal expansion coefficient, pellet/sheath heat transfer coefficient in comparison with those of other parameters such as sheath thickness, film heat transfer coefficient, sheath thermal expansion coefficient and sheath and pellet thermal conductivities.

• Korean Journal of Weed Science
• /
• v.9 no.3
• /
• pp.230-237
• /
• 1989

This research was carried out to investigate the influences of temperature and light on the herbicidal activity of oxyfluorfen, oxadiazon and paraquat. Increased temperature from 10 to $35^{\circ}C$ resulted in increase of herbicidal activity in whole plants or leaf discs treated with herbicides. It seemed that temperature affected herbicide penetration into and reaction to the action site rather than appearance process of herbicidal activity (maybe membrane peroxidation after being absorbed. The activity of compounds tested increased with increased light intensity. Paraquat showed similar activities regardless of light qualities but oxyfluorfen and oxadiazon showed the highest activities in blue light spectrum, indicating that they seemed to be closely related to chlorophyll biosynthesis rather than carotenoid biosynthesis or electron transport systems of photosynthesis and respiration.

• Elastomers and Composites
• /
• v.36 no.3
• /
• pp.153-161
• /
• 2001

The rubber pads era tank which undergo dynamic deformations with the sufficient amplitudes and frequencies lead to a considerable internal temperature rise due to the heat generation. The heat generation which is dependent on the viscoelastic characteristics or a rubber is due to the conversion of partial mechanical energy into thermal energy identical to the area oi hysteresis loop. Heat generation without adequate heat dissipation leads to heat build-up and the excessive temperature rite exerts a bad influence upon the performance and the life of rubber products. In this paper, temperature distributions of the rubber pads of a tank track subjected to dynamic loads are obtained under the assumption of the steady state. Heat generation rates used in this finite element analysis are acquired through experiments and the computed temperature fields are displayed in isothermal contour regions.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.11 no.1
• /
• pp.183-195
• /
• 2009

시설하우스의 공기환경은 작물생육에 큰 영향을 준다. 특히 기공주변 공기의 상대습도는 증산작용에 크게 영향을 주며, 안개가 끼게 되면 기공을 통한 증산작용이 일어나지 않아 작물은 생육을 멈추게 된다. 이에 대한 이론적 고찰을 습공기선도를 중심으로 살펴보았으며, 그 기술을 권왕림(경기도 이천시 백사면 모전2리 192) 쌈채소 재배 농장과 정기설(경기도 용인시 백암면 석천리) 백암육계 농장에 적용한 결과를 요약하면 다음과 같다. 1. 여름철 온실 공기의 온도를 낮추기 위하여 널리 사용하는 Pad & Fan, Mist & Fan 등의 증발냉각 방법은 사막 기후지역(온도는 높고 습도는 낮은 지역)에 적합한 방법으로 우리나라와 같이 고온 다습한 기후에는 적합하지 않다. 2. 겨울철 저녁에 온실을 보온하기 전에 따뜻한 공기의 열이 연료비를 절감 할 수 있다는 생각으로 환기를 하지 않으면 절대습도가 높아 약간의 온도가 떨어져도 안개가 발생하게 된다. 3. 겨울철 저녁에 온실을 보온하기 전에 외부 공기로 충분히 환기하여 절대습도를 낮추면 노점온도가 낮아지고, 약간의 난방으로도 온실의 안개를 방지할 수 있다. 4. 여름철 상추재배에서 시원한 바람으로 공기환경을 개선한 결과 41.6%의 증수효과가 있었다. 5. 겨울철 육계농장의 공기환경 개선으로 47,300수 기준으로 폐사율 2%와 난방연료 40%를 절감할 수 있었으며, 육계 성장의 균일도를 53%→73%로 20%정도 높일 수 있었다. ※ 정기설 백암육계 농장(경기도 용인시 백암면 석천리) (011-719-7597)

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.39-49
• /
• 2007

The objective of this study was to investigate features of transverse crack occurrence and propagation in continuously reinforced concrete pavement(CRCP) when subjected to environmental loading. The finite element model of CRCP was developed and the element removal method was implemented to predict the crack propagation process. To investigate the effect of the type of environmental loading on the CRCP behavior and cracking aspects, the following three different cases were considered: (1) the temperature gradient between top and bottom of the slab does not vary and the constant temperature drop throughout the depth occurs; (2) the temperature at the slab bottom does not vary and the temperature gradient increases; and (3) the temperature between the mid-depth and the bottom of the slab is the same and does not vary and the temperature at the top decreases. The analysis results showed that the crack occurrence and propagation through the depth of the slab in CRCP were significantly affected by the type of environmental loading. The changes in stress distribution and displacements during the crack occurrence and propagation process could also be investigated.