• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.33-43
• /
• 2007

Because usually signal controllers on the crosswalks of mid-block provide pedestrian signals every cycle based on the fixed signal plan, pedestrian signals are provided even when there is no pedestrian demand. Consequently, signal is operated inefficiently and this may cause drivels to experience useless delay or violate the signal. Even though recently pushbuttons have been installed to improve the efficiency of pedestrian signal control in the crosswalks of mid-block and the pedestrian safety. they are not spread out national-wide in Korea because of the cost of the pushbutton equipments and the lack of an acknowledgement of the efficiency of the pushbutton. In this study, the effectiveness of the pushbutton on saving the vehicle delay was verified through before and after study in 4 study sites using a traffic micro-simulation model, VISSIM. To evaluate the viability of the pushbutton, a benefit/cost analysis was also performed for 4 study sites. It was found that B/C ratio of all of 4 study sites was greater than 1. The sensitivity analysis for the traffic volume and pedestrian volume were performed to identify the impact of the both volume on the operation of pushbutton. And, a benefit/cost analysis was performed for all scenarios. It was found that when the pedestrian volume is greater than 90ped/h, the pedestrian signal was operated same as the fixed signal plan. That is, there is no benefit of pushbutton at all once the pedestrian volume is greater than 90ped/h. When the pedestrian volume is equal to or less than 90ped/h and the traffic volume is greater than 2,500veh/h, B/C ratio is greater than 1. Also it was found that as traffic volume increases and pedestrian volume decreases, the benefit increases. In this study, the criteria for installation of pushbutton on the crosswalks of mid-block are developed through the sensitivity analysis and benefit/cost analysis. The results of this study may be used as a criteria for expansion of pushbutton system.

• Korean Chemical Engineering Research
• /
• v.60 no.1
• /
• pp.93-99
• /
• 2022

With the rapid development of ultra-small and wearable device technology, continuous electricity supply without spatiotemporal limitations for driving electronic devices is required. Accordingly, Triboelectric nanogenerator (TENG), which utilizes static electricity generated by the contact and separation of two different materials, is being used as a means of effectively harvesting various types of energy dispersed without complex processes and designs due to its simple principle. However, to apply the TENG to real life, it is necessary to increase the electrical output. In addition, stable generation of electrical output, as well as increase in electrical output, is a task to be solved for the commercialization of TENG. In this study, we proposed a method to not only improve the output of TENG but also to stably represent the improved output. This was solved by using the contact layer, which is one of the components of TENG, as an electret for improved output and stability. The utilized electret was manufactured by sequentially performing corona charging-thermal annealing-corona charging on the Fluorinated ethylene propylene (FEP) film. Electric charges artificially injected due to corona charging enter a deep trap through the thermal annealing, so an electret that minimizes charge escape was fabricated and used in TENG. The output performance of the manufactured electret was verified by measuring the voltage output of the TENG in vertical contact separation mode, and the electret treated to the corona charging showed an output voltage 12 times higher than that of the pristine FEP film. The time and humidity stability of the electret was confirmed by measuring the output voltage of the TENG after exposing the electret to a general external environment and extreme humidity environment. In addition, it was shown that it can be applied to real-life by operating the LED by applying an electret to the clap-TENG with the motif of clap.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.167-176
• /
• 2022

We designed a borehole deviation survey tool applicable for steel-cased holes, K-DEV, and developed a prototype for a depth of 500 m aiming to development of own equipment required to secure deep subsurface characterization technologies. K-DEV is equipped with sensors that provide digital output with verified high performance; moreover, it is also compatible with logging winch systems used in Korea. The K-DEV prototype has a nonmagnetic stainless steel housing with an outer diameter of 48.3 mm, which has been tested in the laboratory for water resistance up to 20 MPa and for durability by running into a 1-km deep borehole. We confirmed the operational stability and data repeatability of the prototype by constantly logging up and down to the depth of 600 m. A high-precision micro-electro-mechanical system (MEMS) gyroscope was used for the K-DEV prototype as the gyro sensor, which is crucial for azimuth determination in cased holes. Additionally, we devised an accurate trajectory survey algorithm by employing Unscented Kalman filtering and data fusion for optimization. The borehole test with K-DEV and a commercial logging tool produced sufficiently similar results. Furthermore, the issue of error accumulation due to drift over time of the MEMS gyro was successfully overcome by compensating with stationary measurements for the same attitude at the wellhead before and after logging, as demonstrated by the nearly identical result to the open hole. We believe that the methodology of K-DEV development and operational stability, as well as the data reliability of the prototype, were confirmed through these test applications.

• Geophysics and Geophysical Exploration
• /
• v.2 no.1
• /
• pp.26-32
• /
• 1999

Among the various seismic data processing sequences, the velocity analysis is the most time consuming and man-hour intensive processing steps. For the production seismic data processing, a good velocity analysis tool as well as the high performance computer is required. The tool must give fast and accurate velocity analysis. There are two different approches in the velocity analysis, batch and interactive. In the batch processing, a velocity plot is made at every analysis point. Generally, the plot consisted of a semblance contour, super gather, and a stack pannel. The interpreter chooses the velocity function by analyzing the velocity plot. The technique is highly dependent on the interpreters skill and requires human efforts. As the high speed graphic workstations are becoming more popular, various interactive velocity analysis programs are developed. Although, the programs enabled faster picking of the velocity nodes using mouse, the main improvement of these programs is simply the replacement of the paper plot by the graphic screen. The velocity spectrum is highly sensitive to the presence of the noise, especially the coherent noise often found in the shallow region of the marine seismic data. For the accurate velocity analysis, these noise must be removed before the spectrum is computed. Also, the velocity analysis must be carried out by carefully choosing the location of the analysis point and accuarate computation of the spectrum. The analyzed velocity function must be verified by the mute and stack, and the sequence must be repeated most time. Therefore an iterative, interactive, and unified velocity analysis tool is highly required. An interactive velocity analysis program, xva(X-Window based Velocity Analysis) was invented. The program handles all processes required in the velocity analysis such as composing the super gather, computing the velocity spectrum, NMO correction, mute, and stack. Most of the parameter changes give the final stack via a few mouse clicks thereby enabling the iterative and interactive processing. A simple trace indexing scheme is introduced and a program to nike the index of the Geobit seismic disk file was invented. The index is used to reference the original input, i.e., CDP sort, directly A transformation techinique of the mute function between the T-X domain and NMOC domain is introduced and adopted to the program. The result of the transform is simliar to the remove-NMO technique in suppressing the shallow noise such as direct wave and refracted wave. However, it has two improvements, i.e., no interpolation error and very high speed computing time. By the introduction of the technique, the mute times can be easily designed from the NMOC domain and applied to the super gather in the T-X domain, thereby producing more accurate velocity spectrum interactively. The xva program consists of 28 files, 12,029 lines, 34,990 words and 304,073 characters. The program references Geobit utility libraries and can be installed under Geobit preinstalled environment. The program runs on X-Window/Motif environment. The program menu is designed according to the Motif style guide. A brief usage of the program has been discussed. The program allows fast and accurate seismic velocity analysis, which is necessary computing the AVO (Amplitude Versus Offset) based DHI (Direct Hydrocarn Indicator), and making the high quality seismic sections.

• The Journal of Korean Philosophical History
• /
• no.32
• /
• pp.215-249
• /
• 2011

This essay reflects on the modernity of Korea by examining the transformation of the traditional knowledge system from a historico-semantic perspective with its focus on the opposition and collision of the old and the new conception occurred in the early period(1890~1910) of the acceptance of the Western modern civilization. With scientific success, trick of reason, Christianity and evolutionary view of history, the Western modernity regarded itself as a peak of civilization and forced the non-Western societies into the world system in which they came to be considered as 'barbarism(野蠻)' or 'half-enlightened(半開).' The East Asian civilization, which had its own history for several centuries, became degraded as kind of delusion and old-fashioned customs from which it ought to free itself. The Western civilization presented itself as exemplary future which East Asian people should achieve, while East Asian past traditions came to be conceived as just unnecessary vestiges which it was better to wipe out. It can be said that East Asian modernization was established through the propagation and acceptance of the modern products of the Western civilization rather than through the preservation of its past experience and pursuit of the new at the same time. Accordingly, it is difficult to apply directly to East Asian societies Koselleck's hypothesis; while mapping out his Basic Concept of History, he assumed that, in the so-called 'age of saddle,' semantic struggle over concepts becomes active between the past experience and the horizon of expectation on the future, and concepts undergoes 'temporalization', 'democratization', 'ideologization', 'politicization.'The struggle over the old and new conceptions in Korea was most noticeable in the opposition of the Neo-Confucian scholars of Hwangseongsinmun and the theorists of civilization of Doknipsinmun. The opposition and struggle demanded the change of understanding in every field, but there was difference of opinion over the conception of the past traditional knowledge system. For the theorists of civilization, 'the old(舊)' was not just 'past' and 'old-fashioned' things, but rather an obstacle to the building of new civilization. On the other hand, it contained the possibility of regeneration(新) for the Neo-Confucian scholars; that is, they suggested finding a guide into tomorrow by taking lessons from the past. The traditional knowledge system lost their holy status of learning(聖學) in the process of its change into a 'new learning(新學),' and religion and religious tradition also weakened. The traditional knowledge system could change itself into modern learning by accepting scientific methodology which pursues objectivity and rationality. This transformation of the traditional knowledge system and 'the formation of the new learning from the old learning' was accompanied by the intersection between the old and new conceptions. It is necessary to pay attention to the role played by the concept of Sil(hak)(實學) or Practical Learning in the intersection of the old and new conceptions. Various modern media published before and after the 20th century show clearly the multi-layered development of the old and new conceptions, and it is noticeable that 'Sil(hak)' as conceptual frame of reference contributed to the transformation of the traditional knowledge system into the new learning. Although Silhak often designated, or was even considered equivalent to, the Western learning, Neo-Confucian scholars reinterpreted the concept of 'Silhak' which the theorists of civilization had monopolized until then, and opened the way to change the traditional knowledge system into the new learning. They re-appropriated the concept of Silhak, and enabled it to be invested with values, which were losing their own status due to the overwhelming scientific technology. With Japanese occupation of Korea by force, the attempt to transform the traditional knowledge system independently was obliged to reach its own limit, but its theory of 'making new learning from old one' can be considered to get over both the contradiction of Dondoseogi(東道西器: principle of preserving Eastern philosophy while accepting Western technology) and the de-subjectivity of the theory of civilization. While developing its own logic, the theory of Dongdoseogi was compelled to bring in the contradiction of considering the indivisible(道and 器) as divisible, though it tried to cope with the reality where the principle of morality and that of competition were opposed each other and the ideologies of 'evolution' and 'progress' prevailed. On the other hand, the theory of civilization was not free from the criticism that it brought about a crack in subjectivity due to its internalization of the West, cutting itself off from the traditional knowledge system.