• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 춘계학술대회논문집
• /
• pp.110-118
• /
• 2008

This thesis introduces a study conducted by ANSYS, Finite Element Analysis program, on dynamic behavior by thickness of a chord and a brace of a jacket typed marine structure. As load condition to work on offshore structures is getting much more various, it becomes more important to design the structures and operate them. In addition, stability is also required. As the result of this study, it was proved that wind and wave load gives more affection on frequency than on added mass in the Modal Analysis. Also, the chord and brace affect stiffness more than diagonal brace according to sensitivity analysis.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1237-1244
• /
• 2006

This research discussed about method for basis construction of sea jacket construction. Several access ways of method for foundation construction of sea jacket construction are used. Accompany many efforts of design and build process to overcome the form of construction work and application equipment, special quality of construction and restriction and so on of sea environment in the case of pile foundation. Therefore, great many factor of sea condition, construction special quality, base condition, construction time, equipment composition, worker composition etc. shows other work form in spot at sea jacket construction process.

• 한국전기전자재료학회논문지
• /
• 제15권8호
• /
• pp.687-694
• /
• 2002

In order to replace the jacket material for URD power cables, the 6 kinds of polyethylene compounds were manufactured and evaluated. The characteristics of the compounds were investigated by water vapor transmission (WVT) test, thermal and mechanical test. In WVT test, all the polyethylene compounds showed the superior water resistance to conventional PVC. The molecular structure and density of polyethylene play an important role in WVT. Also, the polyethylene compounds showed the suitable characteristics in thermal and mechanical test. Especially, the linear polyethylene compounds showed the superior characteristics to LDPE ones. Due to the fillers in compounds, the abrasion resistance was decreased and the cut-through resistance was increased. From this study, it can be considered that the polyethylene compounds may be suitable to jacket material for URD power cables.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권1호
• /
• pp.119-130
• /
• 2008

Diesel engine is one of the most expensive and important components in a ship. Many researchers are interested in increasing the performance of diesel engines. Design of an optimum cooling system should also contribute to the enhancement of the performance as well as the efficiency of engines. In this study, we investigated the flow pattern within the cooling system of a marine diesel engine by using numerical simulation prior to the study of the heat-transfer problem. The engine cooling system is composed of five cooling units each unit containing a water-jacket and a cylinder head. Based on the calculated data, we also conducted theoretical analysis that can predict the flow-rate delivery in each of the five units.

• 한국해양공학회지
• /
• 제10권4호
• /
• pp.17-27
• /
• 1996

본 연구는 진동반응측정을 통해 구조물의 손상을 비파괴적으로 예측하는 분야에 속한다. 건물, 교량, 댐, 해양자켓, 원자력 발전소 등의 구조물에서 시기적절하고 정확한 손상의 발견은 치명적인 구조적 결함의 예방을 위해 필수적이다. 구조물의 진동반응을 측정하여 구조물의 손상발견을 예측하려는 연구는 지난 80년대 이후 활발히 수행되어 오고 있으며, 본연구는 구조물 고유진동수의 변화로 부터 구조물 강성도의 변화를 모니터링하는 연구분야에 속한다. 본 연구의 목적은 현존하는 시스템동일화 (system identification)에 의한 손상발견법의 적합성을 검증하는 것이다. 먼저, 실물실험된 삼차원 트러스교량이 선택되었다. 다음으로, 시스템 동일화 개념에 기초한 손상발견법이 요약되었다. 마지막으로, 시스템 동일화 손상발견법을 실물트러스에 적용하여 적합성을 실험하였다.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.231-235
• /
• 1999

Cooling characteristics of cooling jacket for spindle system with built-in motor are studied. for the analysis, three dimensional model for the cooling jacket is built by using finite volume method. The three dimensional model includes the estimation on the amount of heat generation of bearing and built-in motor and the thermal characteristic values such as heat transfer coefficients on the boundary. The temperature distributions and the cooling characteristics are analyzed by using the commercial software FLUENT. Numerical results show that stream-wise cross section area and flow rate are important factors for cooling characteristics of cooling jacket. Cooling performance of cooling jacket is good in condition that stream-wise cross section's horizontal length is close to its vertical one and flow rate is high. This results show that heat transfer is dominated by velocity profile and heat transfer area.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.691-696
• /
• 2000

Cooling characteristics of cooling jacket for spindle system with built-in motor are studied. Three dimensional model was selected for the analysis of the helical-type cooling jacket. This model includes the estimation on the amount of heat generation from bearing and built-in motor and the thermal characteristic values such as heat flux on the boundary. The temperature distributions are analyzed and the cooling by Nusselt number and total heat transfer coefficient. Numerical results show that stream-wise cross section area and flow rate are important factors for cooling characteristics of cooling jacket.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.37.2-37.2
• /
• 2011

Nowadays, offshore wind energy experiences a rapid development because of its wind condition and no noise impact problem. Different from Europe, offshore wind is just started in Asia. More work and research are needed in Korea. In this work, a three-bladed upwind variable speed pitch controlled 5MW wind turbine on a jacket support structure is used. During the simulation, several design load cases are investigated in two different fully coupled aero-hydro-servo-elastic codes. Some critical loads on the foundation are compared and analyzed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2011년도 추계학술대회 초록집
• /
• pp.38.1-38.1
• /
• 2011

This study investigates the effects of Pierson-Moskowitz, Jonswap spectrum that are typical irregular wave spectrums for wind turbine system with jacket support structure. Also various offshore environmental parameters based on korean local condition were used in our study. The loads acting on the system was considered by referring to the Design Load Case from IEC guide line. And improved von Karman model was used as a turbulence model. As a result, various significant wave height and peak spectral period cause noticeable difference of extreme and fatigue loads prediction.

• 한국의류학회지
• /
• 제22권5호
• /
• pp.575-584
• /
• 1998

The purpose of this study was to develop the better fitting and more comfortable sleeve pattern for women's jacket, as the first step. Five types of existent sleeve pattern were collected, made and worn compared with the sensory evaluations method. The main results of this study were as follows 1. Sensory evaluation for appearance; According to the result of Duncan's multiple range test among the five sleeve patterns, TOJAIUN method sleeve was most satisfactory, and the next was the JUNGMYUNGJA method sleeve followed by NASAN, MOONWHA, ESMOD method sleeve. 2. Sensory evaluation for comfort; The result of Duncan's multiple range test showed that the ESMOD method sleeve was comfortable, and the next was the Japanese MOONWHA method sleeve followd by JUNGMYUNGJA, TOJAIVN, NASAN method sleeve. The result of 3-way ANOVA, main effect for 3 independent variables and interaction for pattern x part, posturers part showed significant difference.