• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.1
• /
• pp.123-128
• /
• 1994

A high speed spindle system for machine tools can be used to reduce the machining time, to improve the machining accuracy, to perform the machining of light metals and hard materials, and to unite the cutting and grinding processes. In this study, a high speed spindle system is developed by applying the oil-air lubrication method, angular contact ball bearings, injection nozzles with dual orifices, cooling jacket and so on. And an air cooling experiment for evaluating the performance of the spindle system is carried out. Especially, in ofder to establish the air cooling conditions related to the development of a high speed spindle system, the effects of cooling air pressure, oil supply rate, air supply rate and rotational spindle speed are studied and discussed on the bearing temperature rise and frictional torque. Also the effects of cooling air pressure, rotational spindle speed and spindle system structure is investigated on the bearing temperature distribution. The experiment on the test model reveals the usefulness of the air cooling method.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.4
• /
• pp.375-384
• /
• 2015

Recently, construction sites of offshore wind power tend to move from shallow water to deep water. From this tendency, the research on the support structure of offshore wind power in deep water will be a key issue. In this study, precast concrete block and suction pile are applied to existing jacket structure. In order to reduce the vibration of this structure, the tuned liquid damper is also applied in the precast concrete block. The applicability of the suggested jacket structure is evaluated by finite element analysis. And the vibration tends to decrease about 5%, when the tuned liquid damper is applied.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.1
• /
• pp.92-101
• /
• 2010

This study reports on the development of intelligent clothing using a shape memory alloy (SMA) that forms a still air layer and provides thermal insulation depending on the environment temperature. SMA springs were prepared with Nitinol and have an original length of 6mm and a latent length of 20mm with a response temperature of $24.5^{\circ}C$. Hysteresis was evaluated at a temperature between $0^{\circ}C$ and $40^{\circ}C$. An experimental outdoor jacket that was attached with 30 springs was compared with a commercial jacket in terms of the microclimate temperature, humidity, and comfort properties by human subject tests in the microclimate chamber set at $5{\pm}0.5^{\circ}C$. The results showed that the microclimate temperature of SMA embedded clothing system from the wear trials was higher than the commercial ones during the rest period after exercise, especially on the skin side. In addition the thermal, humidity, and comfort sensations of SMA embedded clothing were better than the commercial ones.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.3
• /
• pp.309-314
• /
• 2014

The structural layout of mechanical and civil structures is commonly obtained using conventional methods. For example, the shape of structures such as electric transmission towers and offshore substructures can be generated systematically. However, with rapid advancements in computer graphic technology, advanced structural analyses and optimum design technologies have been implemented. In this study, the structural shape of a jacket substructure for an offshore wind turbine is investigated using a topology optimization technique. The structure is subjected to multiple loads that are intended to simulate the loading conditions during actual operation. The optimization objective function is defined as one that ensures compliance of the structure under the given boundary conditions. Optimization is carried out with constraints on the natural frequency in addition to the volume constraint. The result of a first step model provides quick insights into the optimum layout for the second step structure. Subsequently, a 3D model in the form of the frustum of a quadrilateral pyramid is developed through topology optimization.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.55.2-55.2
• /
• 2011

The final site of offshore wind power plant should be decided by comprehensive examination of various conditions such as wind resource, sea depth, geology, grid connection, social circumstance and environmental issue. Wind condition is typically regarded as the most important factor because wind energy increases in proportion to wind velocity and it directly relates to the amount of power output, efficiency of power plant and profitability. Advanced countries in the offshore wind power sector such as Denmark, UK and Germany, they are analyzing wind resource accurately by installing the meteorological mast in the ocean in order to get the optimal type of wind turbine and maximum generation efficiency. Also, it is made much of designing offshore power plant on the basis of actual measurement by met-mast and those wind farms have a chance to get the loan with reduced interest rate in project financing. In Korea, the HEMOSU-1 is installed in the ocean around Wido island to analyze wind resource of test bed of 100MW offshore wind power on october last year. This paper deals with the design and construction procedure of the first met-mast in Korea and also shows the site characteristics of test bed. Therefore, this paper will give useful information to local governments and private business sector who are trying to construct offshore wind farm and it can also be a good reference for the following projects of meteorological mast in near future.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.1A
• /
• pp.19-24
• /
• 2011

Concrete columns strengthening effect due to FRP (Fiber Reinforced Polymer) confinement depends on the elastic modulus of the FRP. This study analyzes the retrofitting effect of FRP confinements according to elastic modulus of FRPs using the existing data and suggests a practical model to assess the strengthening effect. This study subdivides the FRP elastic modulus into three parts based on normal concrete and steel elastic modulus. The slope and the y-axis intersection seem to increase with increasing FRP elastic modulus. In addition, the strengthening effect does not develop up to some amount of FRP confinement having relatively smaller elastic modulus than the compressive elastic modulus of concrete. In this case, a linear model to assess the strengthening effect is hard to be used. Thus, this study suggests that the FRP jackets having 2 times larger elastic modulus than that of concrete are recommended to be used for retrofit of concrete and that a linear model can be applied for the case. The suggested model shows nearly the same result regardless to the restraint of the y-axis intersection. This has been observed at the model of steel confinement and, thus, is a reliable result.

• Journal of the Korean Society of Costume
• /
• v.32
• /
• pp.117-130
• /
• 1997

The purpose of this study were to identify the design elements and the changing flow of advertisement from 1970's to 1990's by using content analysis of men's magazines. Finding were as followed; First through the analysis of men's wear advertisement in magazine it was found that the closer to 1990's the more various men's wear styles and backgrounds were advertized. These were more image oriented than product oriented. Since 1980 the advertisement about the licenced and the imported brands have been increased and the serial advertisement has shown more fre-quently than the 1-page advertisement since 1990's ; Second two piece suit was dominated in men's wear during 1970's and 1980's From 1990's this style was decresed in stead combi suit was increased. In 1970's the X silhouette was infashion and the y and the X silhouette was in fashion and the y and X sillhouette were increased during 1980's . The H silhouette was dominated in 1990's The brighter and the more various colors appeared in 1990's than in 1970's. The brighter and the more various colors appeared in 1990's than in 1970's The solid pattern was the main flow in men's wear however the stripes and the the check patterns were added in 1990's Third single breasted jacket style with two buttons and tailored collar was in fashion during 1970's . The length of the v-zone was shorter than half at this time however it was lengthened in 1980's . Also the the length of the jacket was lengthened. In 1990's the double breasted jacket style and two buttons were increased. The length of the v-zone and jacket were also lengthened.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.71.1-71.1
• /
• 2011

석석탄가스화 기술은 고온, 고압 조건에서 미분탄과 산소의 가스화 반응에 의해 CO와 $H_2$가 주성분인 합성가스를 제조하는 기술로서 차세대 화력발전 뿐만아니라 다양한 화학원료 제조를 위한 분야에서 각광을 받고 있다. 또한, 가스화 기술은 향후 CCS기술, CTL(Coal To Liquid, 석탄액화)기술, SNG(Synthetic Natural Gas, 합성천연가스)생산, 수소생산, 각종 화학원료 생산 등과 연계가 가능한 미래 석탄이용 분야의 핵심 기술이라 할 수 있다. 따라서, 고등기술연구원에서는 이러한 석탄가스화를 통해 양질의 합성가스를 제조하기 위한 기술 개발의 일환으로 pilot급 고온, 고압 건식 분류층 가스화기, 기류수송 방식의 미분탄공급장치, 수냉자켓 구조의 합성가스 냉각장치, 합성가스 중 분진제거를 위한 금속필터 장착 집진장치 등을 연계하여 20기압의 고압 조건에서 장시간 연속운전을 진행하였다. 본 연구에서는 미분탄 공급을 위하여 상부공급 버너를 적용하였고 석탄가스화기는 $1,300{\sim}1,350^{\circ}C$ 정도의 온도에서 운전을 진행하였으며 미분탄을 75 kg/h의 조건에서 연속적으로 공급하였다. 그리고, 이러한 조건에서 5.5일 정도의 연속운전을 진행하는 동안 CO 44~48%, $H_2$ 20~21%, $CO_2$ 4~5% 조성의 석탄 합성가스를 $200Nm^3/h$ 안정적으로 제조할 수 있었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.12 no.4
• /
• pp.157-167
• /
• 2000

Korea Ocean Research and Development Institute performed the basic design of the Ear-Do Ocean Research Station in 1998. The design wave was taken to be the deep water wave which was obtained through wave hindcasting procedure. Wave forces acting on the structure were calculated by Morison formula utilizing the stream function theory of 5th. order. In the present study, a three dimensional hydraulic model testing was undertaken to investigate the validity of the basic design, measuring wave propagation over the Ear-Do, horizontal wave forces and air gaps. The measured forces were all compared by the corresponding values calculated by SACS program based on th design on the design wave. The results showed that in the three deep water wave directions (SSW, S, SE) the measured wave farces appeared less than the SACS calculated. But in the NNW wave direction, the measured forces generally exceeded the calculated values and showed a peculiar pattern very similar to the case that waves are superimposed by an unidirectional current. It was also found that the measured air gap underneath the structure appeared less than the values taken in the basic design for all wave directions.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.1
• /
• pp.40-53
• /
• 1996

In this paper, the wave drift damping is studied. An approximate method is adopted to calculate the wave drift damping for the sake of practical applications. By assuming the ship's forward speed to be low, the Green function and the velocity potential are expanded asymptotically with respect to the Brard number(${\tau}$) and terms up to the first order of ${\tau}$ are retained. Mean wave drift forces are computed straightforwardly. The wave drift damping is estimated as the change rate of the mean wave drift force with respect to the ship's speed. In order to validate the present method, Series 60(Cb=0.7) ship is exemplified for forward speed of Fn=0, 0.02 and 0.04. To predict the wave drift damping experimentally, three geosym models of the Esso-Osaka tanker are used. Also the effect of drift angle on the wave drift damping is also considered. Comparisons between numerical and experimental results show reasonable agreements.