• 한국콘텐츠학회논문지
• /
• 제17권8호
• /
• pp.579-585
• /
• 2017

비다공성 표면에 유류된 지문을 현출하기 위해서는 다양한 기법을 사용할 수 있는데, 분말법은 실무에서 주로 사용되고 있는 기법 중 하나이다. 하지만 분말의 종류가 다양해짐에 따라 각각의 분말마다 권장되는 붓질(stroke) 횟수가 정해져 있지 않아 숙련된 과학수사요원이 잠재지문의 현출정도를 파악하면서 붓질을 해야 하며 현출한 결과물 또한 개개인마다 다르다. 지문 분말은 원료배합과 제조방법에 따라 분말 입자간 서로 붙는 성질이 다양하게 나타나는데 이러한 성질을 자착성(auto-adhesion)이라고 한다. 본 연구에서는 다양한 종류의 지문 분말의 자착 정도를 알아보기 위하여 슬라이드 글라스에 지문을 유류한 후 분말을 각각 1회, 3회, 5회, 10회 적용하여 현출된 지문을 광학현미경으로 배율을 달리하여 관찰하는 실험을 진행하였다. 일부 분말은 붓질 횟수가 증가함에 따라 지문 융선이 더 진하게 현출되는 결과를 보였고 반대로 일부 분말은 약한 자착성으로 인해 붓질의 횟수가 증가함에 따라 지문이 흐려지는 결과를 나타냈다. 각 분말들이 갖는 자착성의 다양함은 분말마다 브러쉬의 사용방법이 달라져야 한다는 사실을 시사하고 있다.

• 한국항해학회지
• /
• 제12권2호
• /
• pp.23-32
• /
• 1988

This paper offers a method of magnetic compass adjustment for the vessel alongside the wharf using newly designed magnetic north former, which makes the same magnetic field-change as the turning vessel does. The characteristics of the magnetic north former was examined by observing the deviation curves of the magnetic compass installed on the compass deviascop at laboratory. The magnetic north former consists of A and B arms which hold the permanent bar magnets at the both ends of each arm. The arm is to rotae in the horizontal plane about the vertical axis fixed at the center boss of the magnetic compass and it is to compensate the horizontal plane about the vertical axis fixed at the center boss of the magnetic compass and it is to compensate the horizontal component of the earth's field. The B arm makes the artificial magnetic north around the magnetic compass for every ship's heading. The results of investigation are summarized as follows ; 1. The observation and correction of magnetic compass deviation can be done without swinging the ship, of the effect of D coefficient is negligible. 2. The residual deviation curve of the magnetic compass depends on the accuracy of deduced value of ship's multplier($\lambda$). 3. The errors due to the inaccuracy of deduced value of ship's multiplier change in the same way as the B and C coefficient do.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.41-42
• /
• 2023

Test results for a total of four types of complex waterproofing methods were analyzed. In the case of the A method, the stress generated by high-viscosity compounds adhering to the base test body during the behavior of the test body was transferred to the sheet surface layer. In the case of the B method and the C method, the properties of the waterproof sheet consisting of a non-hardened seal based and a non-hardened seal are well reflected and stress absorption in the non-hardened seal layer acts strongly, rapidly reducing stress transfer to the surface of the waterproof sheet. In the case of the D method, slip occurs due to repeated behavior, and the stress on the attachment surface is reduced, and the stress transfer to the surface is greatly reduced. As a result, four types of composite waterproofing methods resulted in changing the stress transfer mechanism caused by behavior on the concrete surface due to the physical properties of the internal constituent material of the waterproof sheet.