• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.4
• /
• pp.723-730
• /
• 2015

In this paper, a location tracking compensation algorithm based on the Least-Squares Method ($LCA_{LSM}$) was proposed to improve the autonomous tracking efficiency for the docent robot in exhibition hall, and the performance of the $LCA_{LSM}$ is analyzed by several practical experiments. The proposed $LCA_{LSM}$ compensates the collected location coordinates for the robot using the Least-Squares Method (LSM) in order to reduce the cumulated errors that occur in the Encoder/Giro sensor (E/G) and to enhance the measured tracking accuracy rates in the autonomous tracking of the robot in exhibition hall. By experiments, it was confirmed that the average error reduction rates of the $LCA_{LSM}$ are higher as 4.85% than that of the $LCA_{KF}$ in Scenario 1 (S1) and Scenario 2 (S2), respectively on the location tracking. In addition, it was also confirmed that the standard deviation in the measured errors of the $LCA_{LSM}$ are much more low and constant compared to that of the E/G sensor and the $LCA_{KF}$ in S1 and S2 respectively. Finally, we see that the suggested $LCA_{LSM}$ can execute more the stabilized location tracking than the E/G sensors and the $LCA_{KF}$ on the straight lines of S1 and S2 for the docent robot.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.6
• /
• pp.645-651
• /
• 2012

In this paper, we propose a new method for stabilizing the image captured from a camera mounted on a buoy robot. In this study, in order to solve the problem of cumulative errors and noise produced by a general gyro sensor measuring the orientation angle of the buoy robot, we propose new method for stabilizing the image. In this method, image processing techniques are combined with a newly designed target mounting mechanism that adapts to wave fluctuations. New target extraction and angle estimation techniques are introduced, along with the new mounting mechanism used for the camera and the target, which produce a stabilized image even if the buoy robot is on fluctuating waves.

• Journal of the Institute of Convergence Signal Processing
• /
• v.9 no.3
• /
• pp.179-187
• /
• 2008

In this paper, we carried out the performance evaluation of depolarized fiber optic gyroscope(D-FOG) that was designed and fabricated with the low-cost optical communication single mode fiber and depolarizer. In order to reduce the phase error of D-FOG, the circuit of stabilized current and temperature of the light source was made and the performance was analyzed. The current and the temperature stability of the fabricated stabilization circuit were less than $200{\mu}A$ and $0.0098^{\circ}C$, respectively. Also, the D-FOG's experimental result showed that the value of the dynamic range of rotated rate, the scale factor error with a good linearity, and the zero bias drift were ${\pm}50^{\circ}/s$, 2.8881%, and $19.49^{\circ}/h$, respectively. The results indicated that a low-cost FOG was able to fabricate which was more cost effective than conventional FOG with a high-cost high-birefringent polarization maintaining fiber.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.47-54
• /
• 2013

In this paper, we present an inertial sensor-based motion capturing system to measure and analyze whole body movements. This system implements a wireless AHRS(attitude heading reference system) we developed using a combination of rate gyroscope, accelerometer and magnetometer sensor signals. Several AHRS modules mounted on segments of the patient's body provide the quaternions representing the patient segments's orientation in space. We performed 3D motion capture using the quaternion data calculated. And a method is also proposed for calculating three-dimensional inter-segment joint angle which is an important bio-mechanical measure for a variety of applications related to rehabilitation. To evaluate the performance of our AHRS module, the Vicon motion capture system, which offers millimeter resolution of 3D spatial displacements and orientations, is used as a reference. The evaluation resulted in a RMSE of 2.56 degree. The results suggest that our system will provide an in-depth insight into the effectiveness, appropriate level of care, and feedback of the rehabilitation process by performing real-time limbs or gait analysis during the post-stroke recovery process.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.6
• /
• pp.271-280
• /
• 2017

In this paper, we propose a new safety system composed of wearable devices, driver's seat belt, and integrating controllers. The wearable device and driver's seat belt capture driver's biological information, while the integrating controller analyzes captured signal to alarm the driver or directly control the car appropriately according to the status of the driver. Previous studies regarding driver's safety from driver's seat, steering wheel, or facial camera to capture driver's physiological signal and facial information had difficulties in gathering accurate and continuous signals because the sensors required the upright posture of the driver. Utilizing wearable sensors, however, our proposed system can obtain continuous and highly accurate signals compared to the previous researches. Our advanced wearable apparatus features a sensor that measures the heart rate, skin conductivity, and skin temperature and applies filters to eliminate the noise generated by the automobile. Moreover, the acceleration sensor and the gyro sensor in our wearable device enable the reduction of the measurement errors. Based on the collected bio-signals, the criteria for identifying the driver's condition were presented. The accredited certification body has verified that the devices has the accuracy of the level of medical care. The laboratory test and the real automobile test demonstrate that our proposed system is good for the measurement of the driver's condition.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.539-547
• /
• 2002

본 연구는 풋콩 탈협기 개발을 위한 기초연구로서 풋콩 탈협기의 급치를 교환할 수 있고, 급동의 주속도와 송풍팬의 회전속도 및 공기 흡입구의 개구면적을 조절할 수 있는 실험장치를 제작하고, 급치의 종류가 풋콩의 탈협 및 손상에 미치는 영향을 분석하였다. 또한 송풍팬의 회전속도와 흡입 공기구의 개구비 변화 따른 선별 성능을 분석하였다. 그 결과를 요약하면 다음과 같다. 1 급치의 종류에 따른 풋콩의 미 탈협율은 철선 급치가 최대 1.6%, 최소 0.0%,평균 0.7%로서 가장 낮게 나타났고, 그 다음이 경도 60의 고무제 급치로서 최대 2.0%, 최소 0.0% 평균 1.1%, 경도 80의 고무제 급치는 최대 2.5%, 최소 0.0% 평균 1.7% 순으로 높아졌다. 또한 풋콩의 미탈협율은 급동 원주속도가 18m/s에서 55m/s로 증가할수록 감소하였다. 이는 급동의 원주 속도가 증가함에 따라 급치의 선단이 풋콩 꼬투리에 가하는 타격력이 증가하기 때문인 것으로 생각된다. 2. 급치의 종류에 따른 풋콩의 손상율은 경도 80의 고무제 급치는 최대 5.2%, 최소 1.3%, 평균 2.8%로서 가장 낮게 나타났고, 그 다음이 경도 60의 고무제 급치로서 최대 5.7%, 최소 2.4% 평균 3.8%, 철선 급치는 최대 6.3%, 최소 2.6% 평균 4.2% 순으로 높아졌다. 또한 풋콩의 손상율은 급동 원주속도가 증가할수록 풋콩 꼬투리의 손상율은 증가하였다. 이 또한 급등의 원주 속도가 증가함에 따라 급치의 선단이 풋콩 꼬투리에 가하는 타격력이 증가하기 때문인 것으로 생각된다. 3. 공기흡입구의 개구면적을 증가시킬수록 선별율은 높게 나타났으나 개구비가 60%이상에서는 선별율이 크게 차이가 나지 않았으며, 송풍팬의 원주속도를 높일수록 선별율은 높게 나타났다.도 콤바인이 직선구간 및 선회구간을 주행하며 수확작업이 가능함을 알 수 있었다. 그러나 곡선구간에서는 최대오차가 65.5 cm로 매우 크게 나타나, 콤바인을 무인 자율주행으로 수확하기에는 어려움이 있는 것으로 나타났다. 실제 포장은 이론적인 완전한 직선보다는 작은 굴곡이 있는 곡선의 형태가 이루어져 있으므로 주행 오차를 감소하기 위해서는 기계시각을 이용하면 보다 정밀한 조향을 이룰 수 있을 것으로 예상된다. 포장에서 DGPS 신호, 자이로 센서 등을 이용한 콤바인의 무인주행 장치는 무인 수확작업을 위한 가능성을 보여주었고, 일부의 센서의 기능을 개선하면 만족한 성능을 나타낼 수 있을 것으로 판단된다.dislocations form local defect arrangements at the grooves permitting the substantial reduction in defect density over the remainder of the interfacial area.한 최대의 감자 재배지역을 형성하였다. 제주도는 산지지형과 따뜻한 기온으로 2기작이 가능하고, 감자가공 공장설립과 교통발달에 따른 육지 시장과의 접근이 용이해졌기 때문에 남한에서 2번째로 큰 감자재배지역이 되었다.(요약 및 결론에서 발췌)그람양성균에서 효과적이었으며, 농도별 항균력시험 결과 농도가 증가할수록 비례하여 저해율도 증가함을 알 수 있었다. 첨가농도를 달리하여 미생물의 생육도를 측정한 결과, fraction II磎꼭\ulcorner경우 그람양성균에 대해 500 ppm 이상에서 뚜렷한 증식억제효과를 나타내었다.서 뚜렷한 증식억제효과를 나타내었다.min/+}$계 수컷 이형접합체 형질전환 마우스에 AIN-76A 정제사료만을 투여한 대조군은 1.40$\pm$

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.712-717
• /
• 2003

지능 재료를 이용한 디바이스는 자연계에 존재하는 생명체와 같이 내.외부 환경 변화에 대응하여 스스로 변하는 능동적 기능을 갖고 있기 때문에 시스템 성능의 극대화 및 유지비용의 최소화를 가져오게 된다. 이러한 지능재료 기술은 지난 10여년 전부터 연구되었는데 대표적인 웅용을 보면, 산업, 항공, 교통, 운송 분야의 능동 소음 및 반능동 진동제어; 복합 재료 손상위치 탐지시스템, 손상구조 건전성 평가시스템, 교량, 저장탱크, 건물, 유조선, 대형 구조물의 건전성 평가 시스템; 초정밀 직진 안내기구, 나노 스테이지, 절삭오차 보정용 엑츄에이터, 초음파 회전모터, 지능유압 서보밸브, 변형 거울 등의 모터/엑츄에이터; 자동차 엔진 성능제어, 흡배기구 압력측정, 가속도 센서, 자이로센서, 에어백 센서, 타이어 센서 등의 지능 MEMS/NEMS 센서; electronic article 정찰, 도서태그, 비접촉 항공 운송물 분류 및 보안시스템, 전자 운전자 식별시스템, 광섬유 건물 보안 시스템, 지능 신경망 형상 인식 시스템 등의 보안 시스템; 지능항공기 구조물, 인공위성안테나, 헬리콥터 회전익 등의 형상제어가 있다. 본 논문에서는 지능재료 기술을 정리하고 차세대 철도차량 기술에 지금까지 적용한 예를 소개하며 향후 적용할 수 있는 분야들을 가능성 및 실용성 면에서 소개하고자 한다.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.167-176
• /
• 2022

We designed a borehole deviation survey tool applicable for steel-cased holes, K-DEV, and developed a prototype for a depth of 500 m aiming to development of own equipment required to secure deep subsurface characterization technologies. K-DEV is equipped with sensors that provide digital output with verified high performance; moreover, it is also compatible with logging winch systems used in Korea. The K-DEV prototype has a nonmagnetic stainless steel housing with an outer diameter of 48.3 mm, which has been tested in the laboratory for water resistance up to 20 MPa and for durability by running into a 1-km deep borehole. We confirmed the operational stability and data repeatability of the prototype by constantly logging up and down to the depth of 600 m. A high-precision micro-electro-mechanical system (MEMS) gyroscope was used for the K-DEV prototype as the gyro sensor, which is crucial for azimuth determination in cased holes. Additionally, we devised an accurate trajectory survey algorithm by employing Unscented Kalman filtering and data fusion for optimization. The borehole test with K-DEV and a commercial logging tool produced sufficiently similar results. Furthermore, the issue of error accumulation due to drift over time of the MEMS gyro was successfully overcome by compensating with stationary measurements for the same attitude at the wellhead before and after logging, as demonstrated by the nearly identical result to the open hole. We believe that the methodology of K-DEV development and operational stability, as well as the data reliability of the prototype, were confirmed through these test applications.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.3
• /
• pp.259-264
• /
• 2014

This paper is research paper on the MPD(Magnet Position Device) for the outdoor MGV(Magnet /Magnet Gyro Guidance Vehicle). Usually, MGV is used in indoor environment because of a measurement height of the magnet position device. CMPD(Commercial magnet position device) has 30 mm measurement height, so this is suitable structure in indoor environment like to a flat surface. Outdoor environment is an uneven and irregular, So Outdoor MGV must has a suspension. But CMPD is unsuitable for outdoor environment because of a collision with a surface caused by suspension. Thus, measurement height of the outdoor MPD is positively necessary more than 100 mm. So, we suggest the outdoor MPD using analog magnet hall sensor, moving average filter and Characteristic(rate of the magnet hall sensor) function of the localization. Result of the experiments, the proposed Magnet Position Device for the outdoor MGV has localization accuracy 4.31 mm, measurement height 150 mm and width 150 mm and is efficient more than CMPD.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.9 no.2
• /
• pp.137-144
• /
• 2015

In this paper, we present an inertial sensor-based gait analysis system to measure and analyze lower-limb movements. We developed an integral AHRS(Attitude Heading Reference System) using a combination of rate gyroscope, accelerometer and magnetometer sensor signals. Several AHRS modules mounted on segments of the patient's body provide the quaternions representing the patient segments's orientation in space. And a method is also proposed for calculating three-dimensional inter-segment joint angle which is an important bio-mechanical measure for a variety of applications related to rehabilitation. To evaluate the performance of our AHRS module, the Vicon motion capture system, which offers millimeter resolution of 3D spatial displacements and orientations, is used as a reference. The evaluation resulted in a RMSE(Root Mean Square Error) of 1.08 and 1.72 degree in yaw and pitch angle. In order to evaluate the performance of our the gait analysis system, we compared the joint angle for the hip, knee and ankle with those provided by Vicon system. The result shows that our system will provide an in-depth insight into the effectiveness, appropriate level of care, and feedback of the rehabilitation process by performing real-time limb or gait analysis during the post-stroke recovery.