• Journal of the Earthquake Engineering Society of Korea
• /
• v.9 no.2 s.42
• /
• pp.71-80
• /
• 2005

The solution to a liquid sloshing problem is challenge to the field of engineering. This is not only because the dynamic boundary condition at the free surface is nonlinear, but also because the position of the free surface varies with time in a manner not known a priori. Therefore, this nonlinear phenomenon, which is characterized by the oscillation of the unrestrained free surface of the fluid, is a difficult mathematical problem to solve numerically and analytically. In this study, three-dimensional boundary element method(BEM), which is based on the so-called an arbitrary Lagrangian-Eulerian(ALE) approach for the fluid flow problems with a free surface, was formulated to solve the behavior of the nonlinear free surface motion. An ALE-BEM has the advantage to track the free surface along any prescribed paths by using only one displacement variable, even for a three-dimensional problem. Also, some numerical examples were presented to demonstrate the validity and the applicability of the developed procedure.

• Fire Science and Engineering
• /
• v.31 no.3
• /
• pp.49-53
• /
• 2017

In the present study, the hydrodynamic force acting on the vertical wall of a portable water storage tank is examined. A Dispersion Relation Preserving (DRP) method, proposed by Jang, is applied for simulating lapping waves and their impact on the wall. A meaningful investigation has been observed, which may be applied to the strength design for the portable water storage tank.

• Journal of Korean Port Research
• /
• v.12 no.1
• /
• pp.87-93
• /
• 1998

For the calculation of the free-surface elevation, a new finite difference scheme is studied where the third derivative term for the wave elevation is artificially added in the Eulerian expression of the free-surface boundary condition. The paper presents a comparative analysis with simulations performed by the classical MAC method. More schematic computations are carried out by changing the submergence-depth and angle-of-attack. The present study shows that this new method is very efficient for the simulation of free-surface elevation around the trailing edge.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2000.06a
• /
• pp.241-246
• /
• 2000

최근 들어 집중호우 및 게릴라성 호우 등 이상강우로부터 야기되는 급격한 하천유량의 증가는 교량에서의 세굴에 대한 안정성 여부에 큰 문제를 야기하고 있다. 홍수시에는 유량이 교량의 상관 위로 월류하게 되는 경우가 생기게 되며, 수심의 증가에 따라 상판의 일부분 또는 전체가 물이 잠기게 된다. 이때의 흐름은 압력흐름 상태를 가지게 되어 세굴의 발달을 더욱 크게 만들게 된다. 흥수시 압력흐름에 대한 위험은 일반 흐름에서보다 훨씬 크며 100년 빈도의 홍수사상일 지라도 그 효과는 500년 빈도의 홍수사상보다 더욱 크게 될 것이다. 기존의 세굴에 대한 연구의 대부분은 자유수면을 기초로 하고 있으며 이에 따라 많은 세굴방정식들도 자유수면에 대해서만 이루어지고 있다. (중략)

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.75-82
• /
• 1995

The free surface effects on the aerodynamic performance of 2-D wings are investigated based on the potential flow approximation. The wing is represented b source and vortex distributions on the wing surface. The steady free surface effect is taken into account by source distribution on the free surface and the velocity potentials of air and water flows are obtained. Using three different techniques, namely, positive image method, inverse image method and source distribution method, numerical results are obtained for wave elevation, pressure distribution and lift coefficient with various foil sections. The wave elevation calculated by the inverse image method is shown to be very small even at higher speeds so that the free surface effect on the performance of wings is regraded negligible. However, the wave elevations by the positive image method and source distribution method are relatively high at higher speeds and accordingly the free surface effects on wings can not be neglected.

• Journal of Ocean Engineering and Technology
• /
• v.11 no.2
• /
• pp.70-76
• /
• 1997

수치격자의 크기제한에 의한 자유표면 유동해석 문제를 효율적으로 다루기 위하여 자유표면의 모든 격자를 x 방향으로 4,8,12개로 등분할 하고, y 방향으로는 4개로 잘라서 계산하였다. 이중격자 또는 삼중격자로 Navier-Stokes 방정식의 각항에 크기가 다른 격자를 사용해 효율을 향상시키는 계산방법의 연장으로, 본 논문에서는 자유표면 방정식에 보다 세분화된 격자를 적용해, Marker Particle 이동 및 자유수면 형성에 효율향상을 줄수 있는 수치방법을 도입하였다. 계산결과에 의하면 초기사용 격자가 coarse한 경우가 본방법의 효과가 커짐을 알 수 있고 대상물로는 층류유동에서 Wigley모형과 낭류유동의 S103 모형이다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.7
• /
• pp.1244-1251
• /
• 2022

Marine accidents due to a loss of stability, have been gradually increasing over the last decade. Measures must be taken on the roll reduction of a ship. Amongst the measures, building an anti-roll tank in a ship is recognized as the most simple and effective way to reduce the roll motion. Therefore, this study aims to develop a computational model for a U-tube type anti-roll tank and to validate it by experiment. In particular, to validate the developed computational model, the height of the free surface in the tank was measured in the experiment. To develop a computational model, the mesh dependency test was carried out. Further, the effects of a turbulence model, time step size, and the number of iterations on the numerical solution were analyzed. In summary, a U-tube type anti-roll tank simulation had to be performed accurately with conditions of a realizable k-𝜖 turbulence model, 10^-2s time step size, and 15 iterations. In validation, the two cases of measured data from the experiment were compared with the numerical results. In the present study, STAR-CCM+ (ver. 17.02), a RANS-based commercial solver was used.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.3
• /
• pp.21-32
• /
• 1992

Numerical solutions are presented for solving the free surface flow created by a three-dimensional body moving beneath the free surface with constant velocity at an angle of attack. The solution is obtained using a panel method based on the perturbation potential, which employs Havelock sources and normal dipoles distributed on the body surface and Havelock normal dipoles in the wake downstream of the trailing edge. A pressure Kutta condition with an iterative solution procedure is implemented to satisfy equal pressure condition on the upper and lower surfaces at the trailing edge. Numerical calculation examples in the present paper include an ellipsoid at zero angle of attack, a rectangular planform wing at a small angle of attack in the limit of zero Froude number and then free surface flows and hydrodynamic forces acting on the submerged spheroid and parabolic strut are calculated. Discussions are made about the validity of the present method.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.2
• /
• pp.95-106
• /
• 1999

A numerical model is represented to calculate the wave fields such as the reflected waves, the transmitted waves and the depth-averaged velocities over submerged breakwaters for the normally incident wave trains of nonlinear mono-chromatic wave and solitary wave. The finite amplitude shallow water equations with the effects of bottom friction are solved numerically in time domain using an explicit dissipative Lax-Wendroff finite difference method. The numerical model is verified by comparisons with the other numerical results and the measured data. It is found that the submerged breakwater may be more useful for protecting the energies of monochromatic waves rather than solitary waves. Finally, the armor stability on submerged breakwater is indirectly analyzed using the hydrodynamic characteristics of flow fields.

• 한국방재학회:학술대회논문집
• /
• 2010.02a
• /
• pp.107.2-107.2
• /
• 2010

본 연구에서는 지진해일의 전파 과정을 모의함에 있어 선형 천수방정식의 수치분산을 이용하는 기법이 아닌 선형 Boussinesq 방정식을 직접 차분하는 유한차분기법을 제안하였다. 기법의 정확성을 검증하기 위하여 Gauss 분포의 초기 자유수면변위를 갖는 문제에 착용하여 선형 Boussinesq 방정식의 해석해와 비교하였다. 그 결과 기존의 선형 천수방정식을 차분화한 수치모형에 비하여 정확한 결과를 제공하였고 분산보정기법을 이용한 수치모형과 동일한 정확도를 보였으나 본 수치모형을 이용했을 때 계산 효율이 개선되었다.