• The Magazine for Energy Service Companies
• /
• s.52
• /
• pp.48-59
• /
• 2008

본 논문에서는 새로운 수요관리 자원으로 대두되고 있는 조광제어의 잠재량과 가치평가, 활용방안을 제시하고자 한다. 현재 전력IT 기술이 발전하고 있으며 이는 수요관리 분야에도 많은 기회를 제공하고 있다. 특히 조광제어는 실시간 요금이 변하는 전력시장에서 전력IT 기술을 통해 그 가치를 드러내고 있다. 또한 본 논문에서는 조광자원이 변화하고 있는 전력산업 환경에서, 효율향상 뿐 아니라 부하관리 측면에서도 매우 효과적인 수요자원임을 검증코자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.4
• /
• pp.8-15
• /
• 2009

In this paper, a new demand-side evaluation for the technical potential of lighting dimming control and its applications in electricity markets have been presented. The California standard practice test has been widely used to estimate the economic value of demand-side resources. However, as the advent of deregulation and restructuring of power industry, the California test has been facing some limitations to adopt in the new market environments. In particular the conventional DC test is appropriate for the traditional vertically integrated utility, not for the restructured unbundled utility. Thus, this paper presents a new method to evaluate the economic value of demand-side resource, especially of controllable lighting dimming resource in terms of the energy service provider in market environments. We, therefore, first estimate the technical potential of the lighting dimming control and evaluate the value of the lighting dimming control based on the Korean electricity market data in 2006. The study result shows that the lighting dimming control is a cost effective option for the energy service provider.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.34 no.4
• /
• pp.359-364
• /
• 2001

This paper presents case studies on the multi-species fisheries in Korean waters, Multi-species fisheries were divided into two types, that is, multi-species by a single fishery and single species by multiple fisheries. For the case of single species by multiple fisheries, the small yellow croaker stock caught mainly by the Korean pair trawl fishery and the Korean stow net fishery was selected. This approach uses both standardized fishing efforts for the two fisheries by a general linear model and some data for the economic analysis, and then estimates maximum sustainable yield (MSY), maximum economic yield (MEY) and fishing efforts for MSY and MEY, An analysis of interaction aspects between pair trawl and stow net fisheries was carried out to predict the optimal level of fishing effort from the economic point of view, which gives the largest benefits to the two fisheries.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.74-84
• /
• 2009

The study aims that high quality recycled sand by wet manufacturing system can be used in practical way through basic material property. The basic material property test was done by 4 categories, dry manufacturing system (1) tandem and (2) parallel, wet manufacturing system (3) large capacity and (4) small capacity. RS-IV is the final production of (1) to (4) method, it is tested via KS F 2573 (recycled fine aggregate). RS-IV is satisfied with 4 items, those are absolute dry density, 0.08mm sieve throughput, clay lump amount, and organic impurity substance content. However, absorptivity item has problem in (1) and (2) method, (3) and (4) method are confirmed with norms 5% low. Also, the production quality of wet manufacturing system is better than dry manufacturing system in absolute dry density, absorptivity, 0.08mm sieve throughput, and clay lump amount.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.11a
• /
• pp.342-350
• /
• 2005

우리나라 서해안 중부, 경기만 일대는 강한 조석과 잘 발달된 해만으로 인해 천혜의 조력자원 보고로 알려져 있으나, 1980년대부터 서 남해 연안역에 대한 대규모 매립과 항만개발 등으로 조력개발입지 자체가 상실되고, 조석체계도 변화되고 있다. 한편 조력에너지는 기존의 화석연료를 대체할 수 있는 개발가능한 신 재생 에너지 중에서 거의 유일하게 대규모로 개발이 가능한 것으로 평가되고 있어 개발시 기대효과는 매우 클 것이다. 이에 우리나라 서해안의 조력자원 부존량을 파악하고 주요 후보지에 대한 개발타당성 검토를 통하여 주요 조력자원 후보지를 타 개발로부터 보호하고, 민간참여를 유도하여 조력에너지 개발을 활성화하고자 본 조사를 추진하였다. 한반도 조력자원 개발타당성 검토를 위하여 1) 서해안의 주요 지점에 대한 조석특성을 조사하였고, 2) 주요 조력자원 후보지 위치 및 영역을 설정하였으며, 3) 조석체계변화예측 수치모형실험을 실시하였고, 4) 후보지별 발전소 평면배치계획을 수립하였으며, 5) 후보지별 연간발전량과 개략공사비를 산출하여 6) 후보지별 개략타당성 검토를 수행하였다. 검토결과 우리나라 서해안의 조력개발 가능규모는 215만kW 정도이며, 주요 후보지를 모두 개발할 경우 연간 3,826GWh의 전기를 생산할 수 있을 것으로 조사되었다. 또한 연간발전량 대비 순공사비 비율에 따르면 만 입구가 좁아 개발 경제성 확보가 유리한 가로림만을 우선 추진하고, 이후 인천만, 천수만 순으로 개발하는 것이 유리한 것으로 나타났다.

• Economic and Environmental Geology
• /
• v.41 no.4
• /
• pp.443-451
• /
• 2008

Memon(1995) pointed out that the groundwater recharge from the precipitation is affected by various factors such as the occurrence, intensity, duration, and seasonal distribution of rainfall; air temperature, humidity, and wind velocity; the character and thickness of the soil layer above the water table; vegetated cover, soil moisture content, depth to the water table, topography; and land use. To reflect above factors, groundwater recharge in Chungju basin is computed by using the SWAT-K which is a longterm continuous watershed hydrologic model. Frequency analysis is adopted to evaluate the existing values of potential amount of groundwater development which is made by the 10 year drought frequency rainfall multiplied by recharge coefficient. In this work, the recharge rates of 10 year drought frequency in subbains were computed and compared with the existing values of potential amount of groundwater development. This process could point out the problems of existing precesses used for computing potential amount of groundwater development.

• Environmental and Resource Economics Review
• /
• v.25 no.4
• /
• pp.565-590
• /
• 2016

In accordance with the global efforts to reduce greenhouse gas emissions, Korean government submitted its INDC (Intended Nationally Determined Contribution) of 25.7% for domestic reduction and the total of 37% reduction by 2030 including the purchase of emission reduction permit from abroad. In this study, 25.7% reduction target is being evaluated to see its impact on domestic energy system using the integrated assessment model, GCAM (Global Change Assessment Model). Results show that electricity generation from fossil fuel technologies using coal and gas decrease by 28.0%, 13.5% while that of biomass, wind power, solar energy increase by 47.6%, 22.0% and 45.4%, respectively. It is worth noting that so called new technology such as USC (ultra supercritical power generation) does not contribute to achieving the emission reduction target and careful and quantitative analysis is required for such categorization in the future.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.2
• /
• pp.198-203
• /
• 2020

Cracking due to material behavior like drying shrinkage easily occurs since tensile strength in concrete is very low at initial curing stage. In this paper, workability such as air content and slump was evaluated on CFC(Cellulose Fiber Concrete) with 0.0 ~ 2.0% of fiber addition, and the tests for tensile/compressive strength were performed. With increasing addition ratio of fiber, air content and slump kept similar level to 1.0kg/㎥ of addition ratio, and this trend was effective to 2 hours after mixing. Strength was enhanced with increasing addition ratio, which showed 7.0 ~ 9.0% for compressive strength and 7.0 ~ 22.0% for tensile strength, respectively. The tensile strength increased relatively more, which show the addition of cellulose fiber was very effective to crack resistance. The workability in CFC can be guaranteed for 2 hours in the following conditions like 2 minutes of mixing period and 1.0kg/㎥ of addition ratio of fiber.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.3
• /
• pp.70-78
• /
• 2018

Due to the increasing concern about climate change, efforts to reduce environmental load are continuously being made in construction industry, and life cycle assessment (LCA) is being presented as an effective method to assess environmental load. Since LCA requires information on construction quantity used for environmental load estimation, however, it is not being utilized in the environmental review at the initial design stage where it is difficult to obtain such information. In this study, a construction quantity computation system based on the standard section was developed for the drainage facilities of the road and utilized in the model to calculate the environmental load. This model can estimate the environmental load by calculating the amount of resources required for LCA using only the information available at the initial design stage. To verify the validity of the model, five validation cases were applied and compared with the unit estimation model and the multiple regression analysis model. As a result, it is confirmed that the mean absolute error rate is 9.94%, which is relatively accurate and effective model in the initial design stage.

• Resources Recycling
• /
• v.30 no.3
• /
• pp.47-54
• /
• 2021

Palladium present in colloidal-type plated spent catalyst solution that is used in electroless plating process has not been recovered but discharged as wastewater so far. Recyclig of paladium in colloidal-type plated spent catalyst solution is achieved with this study. This study presents the estimation of resource consumption and GHG emissions during the recycling and disposal of palladium in the plated spent catalyst solution using life cycle assessment. The reduction of resources and GHG are also estimated. Based on the palladium amount of 1 kg during disposal, the GHG emission amount was estimated to be 9.67E+03 kgCO₂eq., and the amount of resource consumption was 3.94E+01 kgSb-eq. However, GHG emission was 1.96E+03 kgCO₂eq., and the amount of resource consumption was 1.54E+01 kgSb-eq. during recycling. Considering the major substances affecting GHG emissions and amount of resource consumption, CO₂ was found to significantly affect GHG emissions, accounting for 91.42% in disposal and 98.37% in recycling. The major substance affecting the amount of resource consumption was hard coal, which accounted for 40.63% in disposal and 60.73% in recycling. Upon recycling 1 kg palladium, 8,967.17 kgCO₂eq. of greenhouse gas emission was reduced, while the resource consumption was reduced to 10.10 kg Sb-eq. In addition, the direct palladium resource reduction rate due to palladium recycling was 50%.