• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.505-512
• /
• 2021

A 3D model was developed to calculate the UV intensity of a submerged-type UV disinfection reactor. Numerical experiments were conducted by inputting the design factors of an open channel-type disinfection reactor and a pipe-type disinfection reactor that were installed in an actual sewage treatment plant. The following data were obtained: The average UV intensity of the installed open channel-type reactor and pipe-type reactor was 7.87 mW/cm² and 13.09 mW/cm², respectively; the UV dose reflecting the UV irradiation time and taking into account attenuation effects such as mixing imbalance, lamp aging, temperature, and fouling, was expected to be 21.1 mJ/cm² and 24.8 mJ/cm², respectively, and these values are 5 % and 24 % higher than the target UV dose of 20 mJ/cm², respectively. By using the UV3D model, the optimal lamp position, which maximizes the average UV intensity without changing the size of the disinfection reactor or lamp output power, can be found. In this case, by only adjusting the lamp position, the average UV intensity can be increased by 0.9 % for the open channel-type and 0.5 % for the pipe-type, respectively. A better average UV intensity can be obtained by model simulation. By adjusting the horizontal and vertical ratio of the open channel-type reactor and by moving the lamp position, the average UV intensity can be increased by 7.4 % more than the present case.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.4
• /
• pp.421-427
• /
• 2008

UV disinfection is widely used in water treatment facilities and wastewater treatment plant because of its effectiveness to removal of pathogen and Giardia which is resistant to traditional chemical disinfection. As a design and performance tool of UV disinfection system, 3 dimensional UV intensity models were composed and simulated to compare each other and to find affecting factors in this study. Reflection, refraction and absorption are important parameters in UV intensity model and MPSS and MSSS model can reflect these parameters while LSI model can not. Absorption is the most important parameters among the reflection, refraction, absorption and shadowing so, this should not be neglect. Based on this simulation, shadowing effect is negligible when the number of installed lamp is a few but, this effect can not be neglectable when the number of installed lamp is quite a few. The errors according to shadowing effect is increased as the number of lamp installed increased.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.2
• /
• pp.257-264
• /
• 2012

The concept of a non-contact type of UV disinfection system was introduced in this study. UV lamps and their quartz sleeves hang over the water surface and there is no interface between the sleeve and water. Obviously, there is no fouling. Based on optical laws and other UV distribution models, a detail mathematical model for a non-contact type UV disinfection system was developed in this study. Pathway length of UV light in a non-contact type photoreactor is longer than that in a submerged type photoreactor because the light is more refractive while passing through 3 interfaces of medium. But the pathway length passing through the water media is not significantly longer than that in a submerged type photoreactor so, the absorption of UV light by water is not significantly different from the other system. Due to the reflection effect, UV intensity is rapidly decreased as the horizontal distance from the light source is increased. The reflective attenuation in a non-contact type photoreactor is higher than that in a submerged type photoreactor. These mean that the short photoreactor is advantageous than the narrow-long photoreactor for the non-contact type photoreactor in an optical point of view.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2000.05a
• /
• pp.87-90
• /
• 2000

• Journal of Astronomy and Space Sciences
• /
• v.17 no.2
• /
• pp.189-198
• /
• 2000

The emission lines of the ultraviolet region and the light curves of the optical region have been analyzed to investigate the distorted light curves of SZ Psc. The Mg II emission lines of the IUE spectra confirmed that the chromospheric activity of SZ Psc occurs on the K1 IV star. The distorted light curves in the optical region have been analyzed by the spot model where the spots are on the K1 IV star as the result of the chromospheric activity. The complete photometric solution could be deduced for SZ Psc by the good fitness with the spot model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.9
• /
• pp.17-23
• /
• 2009

Interest in application of ultraviolet light technology for primary disinfection of potable water in drinking water treatment plants has increased significantly in recent years. The efficacy of disinfection processes in water purification systems is governed by several key factors, including reactor hydraulics, disinfectant chemistry, and microbial inactivation kinetics. The objective of this work was to develop a computational fluid dynamics(CFD) model to predict velocity fields, mass transport, chlorine decay, and microbial inactivation in a continuous flow reactor. The CFD model was also used to evaluate disinfection efficiency in alternative reactor designs. In a typical operation, water enters the inlet of a UV lamp and flows through the annular space between the quartz sleeve and the outside chamber wall. The irradiated water leaves through the outlet nozzle. In this paper, it describe the how to design optimal ultraviolet disinfection device for ground water and rainwater. To search the optimal design method, it was performed computer simulation with 3D-CFD discrete ordinates model and manufactured prototype. Using proposed design method, performed simulation and proved satisfied performance.

• The Journal of the Society of Korean Medicine Diagnostics
• /
• v.15 no.2
• /
• pp.149-158
• /
• 2011

Objectives: The objective of this study is to compare the colour intensity of tongue body and that of tongue coat under the visible light and the ultraviolet light. Methods: We selected 7 subjects with completely or partially peeled tongue coat among the recruited 94 adults for the experiment. We took each tongue picture under the visible light and the ultraviolet light (315-400 nm) and then extracted sample images from the tongue body and tongue coat regions. Mean, median and mode of colour intensity from the sample images were calculated in 256 RGB system. Results: The green and the blue colour intensities of the tongue coats were significantly higher than those of the tongue bodies under the visible light. In all channels, the red, green and blue, the colour intensities of the tongue coats were significantly higher than those of the tongue bodies under the ultraviolet light. The colour differences between tongue coats and tongue bodies under the ultraviolet light were significantly higher than the colour differences under the visible light. Especially the colour difference under the ultraviolet light was highest in the green channel. Conclusions: We suggested that green colour image of the RGB system taken under the ultraviolet light could be used for more easy separating tongue coat region from tongue body.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.1
• /
• pp.118-125
• /
• 2021

In this study Orostachys japonica A. Berger used is a medicinal herb that has long been used as a folk remedy for cancer treatment. In this study, the antioxidant efficacy of the ethyl acetate fraction of Orostachys japonica A. Berger was confirmed. The results of the Orostachys japonica A. Berge ethyl acetate fraction of antioxidant activity assays showed Antioxidant effect of Orostachys japonica A. Berger EtOAc fraction extract at 0.10 mg/mL was showed a DPPH radical scavenging rate of 78.54% and ABTS+ radical scavenging rate of 73.48%. Also, the toxicity result of Orostachys japonica A. Berger EtOAc fraction extracts using alternative experimental animal model zebrafish, confirmed a 100% the survival of the zebrafish embryo was shown that there was no coagulation and no hatching delay at all concentrations. also ROS generation induced by UV-B irradiation was confirmed that the fluorescence intensity decreased as a whole in all larvae treated with Orostachys japonica A. Berger EtOAc fraction extracts. In particular, it was confirmed that ROS generation was effectively suppressed by showing a 35.7% reduction rate compared to the positive control at a concentration of 3 ㎍/mL. These results were confirmed that Orostachys japonica A. Berger EtOAc fraction extracts has the possibility of application in the cosmetics field as a natural antioxidant.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.1
• /
• pp.33-46
• /
• 2010

We investigated and estimated at the characteristics of decomposition and by-products of N-Nitrosodimethylamine (NDMA) using a design of experiment (DOE) based on the Box-Behken design in an UV process, and also the main factors (variables) with UV intensity($X_2$) (range: $1.5{\sim}4.5\;mW/cm^2$), NDMA concentration ($X_2$) (range: 100~300 uM) and pH ($X_2$) (rang: 3~9) which consisted of 3 levels in each factor and 4 responses ($Y_1$ (% of NDMA removal), $Y_2$ (dimethylamine (DMA) reformation (uM)), $Y_3$ (dimethylformamide (DMF) reformation (uM), $Y_4$ ($NO_2$-N reformation (uM)) were set up to estimate the prediction model and the optimization conditions. The results of prediction model and optimization point using the canonical analysis in order to obtain the optimal operation conditions were $Y_1$ [% of NDMA removal] = $117+21X_1-0.3X_2-17.2X_3+{2.43X_1}^2+{0.001X_2}^2+{3.2X_3}^2-0.08X_1X_2-1.6X_1X_3-0.05X_2X_3$ ($R^2$= 96%, Adjusted $R^2$ = 88%) and 99.3% ($X_1:\;4.5\;mW/cm^2$, $X_2:\;190\;uM$, $X_3:\;3.2$), $Y_2$ [DMA conc] = $-101+18.5X_1+0.4X_2+21X_3-{3.3X_1}^2-{0.01X_2}^2-{1.5X_3}^2-0.01X_1X_2+0.07X_1X_3-0.01X_2X_3$ ($R^2$= 99.4%, 수정 $R^2$ = 95.7%) and 35.2 uM ($X_1$: 3 $mW/cm^2$, $X_2$: 220 uM, $X_3$: 6.3), $Y_3$ [DMF conc] = $-6.2+0.2X_1+0.02X_2+2X_3-0.26X_1^2-0.01X_2^2-0.2X_3^2-0.004X_1X_2+0.1X_1X_3-0.02X_2X_3$ ($R^2$= 98%, Adjusted $R^2$ = 94.4%) and 3.7 uM ($X_1:\;4.5\;$mW/cm^2$, $X_2:\;290\;uM$, $X_3:\;6.2$) and $Y_4$ [$NO_2$-N conc] = $-25+12.2X_1+0.15X_2+7.8X_3+{1.1X_1}^2+{0.001X_2}^2-{0.34X_3}^2+0.01X_1X_2+0.08X_1X_3-3.4X_2X_3$ ($R^2$= 98.5%, Adjusted $R^2$ = 95.7%) and 74.5 uM ($X_1:\;4.5\;mW/cm^2$, $X_2:\;220\;uM$, $X_3:\;3.1$). This study has demonstrated that the response surface methodology and the Box-Behnken statistical experiment design can provide statistically reliable results for decomposition and by-products of NDMA by the UV photolysis and also for determination of optimum conditions. Predictions obtained from the response functions were in good agreement with the experimental results indicating the reliability of the methodology used.