• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.3
• /
• pp.263-269
• /
• 2003

Magnetic flux leakage (MFL) signals were used for corrosion inspection of buried oil and gas pipeline. 3D finite element analysis was used to examine the effects of far and near-side pit depth and tensile stress on MFL signals. Anisotropci materials were used, and the effects of simulated tensile stress on MFL were investigated. The axial and radial MFL signals depended on far and near-side single pit depth and on the bulk stress, but the circumferential MFL signal did not depend on them. The axial and radial MFL signals increased with increasing pit depth and the bulk stress, but the circumferential MFL signal was scarcely changed.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.60-62
• /
• 2018

본 논문에서는 유도전동기의 회전자 시정수 오차에 강인한 센서리스 전차원(Full-Order) 자속(Flux) 관측기(Observer)를 제안하였다. 이 관측기는 고정자 자속과 회전자 자속을 동기좌표계상에서 추정한다. 고정자 자속에서 누설 자속을 뺀 공극 자속을 기준으로 제어를 수행하며, 동기좌표계가 공극 자속을 빠르게 따라갈 수 있는 방법을 제안하였다. 제안된 방법을 적용할 때, 기존의 회전자 자속을 직접 이용하는 방법보다 중-고속 영역에서 회전자 시정수 오차의 영향이 감소함을 확인하였다. 또한 기존 관측기와 달리 제안된 관측기에서 적응제어기(Adaptive Controller)는 전동기의 회전 주파수가 아닌, 전동기의 슬립 주파수 만을 추정하므로, 회전자 자속 오차에 민감한 적응제어기의 역할을 축소하였다. 시뮬레이션 및 실험으로 이론의 타당성 및 효과를 검증하였다.

• Journal of the Korean Institute of Gas
• /
• v.12 no.2
• /
• pp.53-56
• /
• 2008

We have developed a system for nondestructive measurement of the magnetic flux leakage at welding flaws, existing in a gas pipeline by Hall sensor. For measuring the magnetic flux leakage, we designed a reference specimen having four kinds of welding flaws. Magnetic flux leakage is measured around the welding flaws of the specimen. The possibility for classification of different kinds of welding flaws is carried out by means of the peak-peak value and the interval between peak-peak of the magnetic flux leakage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6270-6275
• /
• 2014

The paper reports an improvement method on torque ripples of multi-pole interior permanent magnet synchronous motor (IPMSM) applied to a traction motor for hybrid electric vehicles. In the case of multi-pole IPMSM, the magnetic flux generated by a permanent magnet tends to leak through the bridge of the rotor without a link with stator windings. The slit design on the rotor surface was proposed to reduce torque rippling and increase the output power by reducing the leakage flux. Two design parameters for the slit are suggested for optimal design using the response surface method. As an analysis method, the 2D finite element method (FEM) was applied to consider magnetic saturation effect.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.05a
• /
• pp.128-129
• /
• 1998

• 기계와재료
• /
• v.11 no.2 s.40
• /
• pp.146-157
• /
• 1999

• Proceedings of the Korean Magnestics Society Conference
• /
• 2014.11a
• /
• pp.104-105
• /
• 2014

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2108-2109
• /
• 2008

매년 증가하고 있는 누전사고에 대한 대책수립을 위해 누전검출장치 및 누전조사작업을 시행하고 있지만, 대부분 전압변화 및 영상전류 및 z임피던스에 의한 계측이 주를 이루고 있다. 본 논문에서는 누전지역에서의 누설전류에 자속밀도 분포를 조사함으로 손쉬운 누전검출장비 개발 및 비접촉에 의한 누전검출장비 개발과 누전환경에서의 기초 연구자료를 제공하고자 정상선로에서의 자속밀도 분포 및 전압변화에 따른 자속밀도 분포를 조사하였다. 그 결과 정상도선에서는 거리변화에 따른 자속밀도가 감소하였으며, 이에 반해 침수된 누전지역에서는 자속밀도변화가 거의 없음을 확인할 수 있었으며, 전압 증가에 따라 누전지역의 전류값이 정상상태보다 더 크게 변화하는 것을 확인할 수 있었다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.108-113
• /
• 2009

MFL(magnetic flux leakage) inspection is a general method of non-destructive evaluation(NDE) of underground gas pipelines. Pipelines are magnetized by permanent magnets when MFL PIG(pipeline inspection gauge) gets through them. If defects or corrosions exist in pipelines, effective thickness is changed and thus variation of leakage flux occurs. The leakage flux signals detected by hall-sensors are analyzed to characterize defect's geometries such as length, width, depth, and so on. This paper presents several methods for estimating defect's length using MFL signals and their performances are compared for real defects carved in KOGAS pipeline simulation facility. It is found that 80% and 90% of minimum values for axial and peak values for radial signals respectively show the best performance in the point of length estimation error.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.2 no.3
• /
• pp.17-25
• /
• 1991

Magnetic leakage flux which is generated from the levitation magnets, linear induction motors, and guide magnets of a MagLev(Magnetic Levitation) system is directly related to inter - system EMI, intra - system EMI, and biological effects. In this paper, the magnetic leakage flux from MagLev vechicles designed by Korea Resarch Institute of Ships & Ocean Engineering was calculated considering the various parameters which influence ma- gnetic field intensity around the MagLev system. Based on the calculated field intensity, the thickness of shielding material and shielding position for MagLev floor and side walls are calculated, taking into account the shielding effectiveness of a shield with minimum weight. For the nonuniform shielding method derived from the above procedure, the weight of a shield con- sisting of floor and side walls shielding can be reduced to more 50% than uniform shielding method.