• Journal of the Korean Magnetics Society
• /
• v.7 no.4
• /
• pp.205-211
• /
• 1997

The magnetic properties change which was induced by addition of small amount of Ni into Cr underlayer in CoCrTa/ CrNi thin film deposited by electron beam evaporator was investigated. The additional Ni element was found to be beneficial for incease in the coercivity of the thin film deposited at the room temperature. The origin of coercivity increase was elucidated by crystal orientation and microstructure investigation using XRD and AFM respectively. It was found that the grain size were increased by Ni addition. The coercivity of the film with CrNi underlayer is lower than that of film with Cr underlayer when prepared with higher substrate temperature. This result may be originated with the increase in grain size. When film was deposited at 280 $^{\circ}C$ substrate temperature, Cr segregation in grain boundary is found to be the other factor for determining coercivity value.

• Journal of the Korean Magnetics Society
• /
• v.4 no.4
• /
• pp.319-325
• /
• 1994

Permalloy films were deposited by an RF magnetron sputtering method using several different targets which had been cold-rolled and annealed at various temperatures to give different microstructure and texture. The grain refinement occurs at high temperature annealing due to recrystallization and subsequently the initial (110) target texture transforms to the random texture. The coercive forces of thin films fabricated using targets which are not recrystallized are below 0.2 Oe in the AI pressure range of 1~5 mTorr and the lowest coercive force achieved is 0.07 Oe. The low value of coercive force, 0.25 Oe, is only obtained at the sputtering conditions of 400 W and 1 mTorr, and 300 W and 5 mTorr when recrystallized targets are used. The internal stress changes from compressive to tensile as the Ar pressure increases, the stress-free being at 5 mTorr. The changes of coercive force and permeability can be well interpreted by the differences from the composition and the internal stress.

• Geophysics and Geophysical Exploration
• /
• v.16 no.2
• /
• pp.91-96
• /
• 2013

This study proposes a method to correct inclination of instrument during exploration with a biaxial clinometer and GNSS compass. In 3-component magnetometry, measured vectors are ordinarily described in randomly inclined observation coordinate system due to movement, vibration, and shaking of instrument. Therefore, rotation angles of observation plane are needed to transform it into geodetic coordinate system. In this study, we measured inclination angles of observation plane by using 2-axis clinometer and GNSS compass, and derived proper parameters for rotational transform from them. We applied the conversion method to on-board 3-component magnetometry, and then transformed raw data into proper values on geodetic coordinate system.

• The Korean Journal of Petroleum Geology
• /
• v.2 no.2 s.3
• /
• pp.51-57
• /
• 1994

Analysis of the aeromagnetic data aquired by US Navy in the year 1969 permits us to predict a new sedimentary basin, Heugsan Basin, south of the known Gunsan Basin in Block Ⅱ. The basin appears to consist of three sub-basins trending NNW-SSE. The results of our analysis provide not only an independent assessment of the Gunsan Basin, but also new important information on the tectonic origin and mechanism for the two basins as well as for the entire region. The basin forming tectonic style is interpreted as rhombochasm associated with double overstepped left-lateral wrench faults. From the magnetic evidence, a few NE-SW trending major onshore faults are extended to the study area. We also interpreted the nature of the faults to be left-lateral wrenches. This new gross structural style is consistent with the results of recent Yeongdong Basin analysis by Lee. The senses of fault movement are also supported by the paleomagnetic evidence that the Philippine Sea had experienced an 80-degree clockwise rotation since the Eocene. Based on a 2 $\frac{1}{2}$ model study the probable maximum thickness of the sediments in the Gunsan Basin is approximately 7500 meters. We believe that the new Heugsan Basin was left unidentified because a high velocity layer may be overlying the basin. Because the overall structural configuration of the Heugsan Basin appears to be favorable for hydrocarbon accumulation, a detailed airborne magnetic survey is recommended in the area in order to verify the magnetic expression of this thick basin. A detailed subsequent marine gravity survey is also recommended in order to delineate the sedimentary section and to acquire supplemental data to the magnetic method only if an overlying high velocity layer is confirmed. Otherwise a high energy source seismic survey may be more effective.

• Economic and Environmental Geology
• /
• v.52 no.1
• /
• pp.1-12
• /
• 2019

Batch experiments for the soil washing coupled with the magnetic separation process were performed to remediate the soil contaminated with metal and oil wastes. The soil was seriously contaminated by Zn and TPH (total petroleum hydrocarbon), of which concentrations were 1743.3 mg/kg and 3558.9 mg/kg, respectively, and initial concentrations of Zn, Pb, Cu, and TPH were higher than the 2nd SPWL (soil pollution warning limit: remediation goal). The soil washing with acidic solution was performed to remove heavy metals from the soil, but Pb and Zn concentration of the soil maintained higher than the 2nd SWPL even after the soil washing with acidic solution. The 2nd soil washing was repeated to increase the Pb and Zn removal efficiency and the Zn and Pb removal efficiencies additionally increased by only 8 % and 5 %, respectively, by the 2nd soil washing (> 2nd SPWL). The small particle separation from the soil was conducted to decrease the initial concentration of heavy metals and to increase the washing effectiveness before the soil washing and 4.1 % of the soil were separated as small particles (< 0.075 mm in diameter). The small particle separation lowered down Zn and Pb concentrations of soil to 1256.3 mg/kg (27.9 % decrease) and 325.8 mg/kg (56.3 % decrease). However, the Zn concentration of soil without small particles still was higher than the 2nd SPWL even after the soil washing, suggesting that the additional process is necessary to lower Zn concentration to below the 2nd SPWL after the treatment process. As an alternative process, the magnetic separation process was performed for the soil and 16.4 % of soil mass were removed, because the soil contamination was originated from unreasonable dumping of metal wastes. The Zn and Pb concentrations of soil were lowered down to 637.2 mg/kg (63.4 % decrease) and 139.6 mg/kg (81.5 % decrease) by the magnetic separation, which were much higher than the removal efficiency of the soil washing and the particle separation. The 1st soil washing after the magnetic separation lowered concentration of both TPH and heavy metals to below 2nd SPWL, suggesting that the soil washing conjugated with the magnetic separation can be applied for the heavy metal and TPH contaminated soil including high content of metal wastes.

• Journal of the Korean Magnetics Society
• /
• v.3 no.1
• /
• pp.41-47
• /
• 1993

Effects of Ta addition on Co-Cr pependicular magnetic recording media were studied to obtain high perpen-dicular coercivity at lower substrate temperature. For the purpose. magnetic properties and microstructures of Co-Cr-(Ta) films were studied by varying the Cr contents from 17 to 21 at.% and Ta contents for 0 to 3.2 at.%. Effectiveness of Ta addition in increasing perpendicular coercivity was significant for lower Cr content films. The increasement of perpendicular coercivity was more pronounced for the films deposited on $100^{\circ}C$ heated substrate in the case of ${(Co_{83}Cr_{17})}_{98.4}Ta_{1.6}$ composition. The cause of the increase of perpendicular coercivity was considered due to not the grain refinement effects and the improvement of c-axis alignments but increase of Ta and Cr segregation.

• Journal of the Korean Magnetics Society
• /
• v.3 no.3
• /
• pp.215-220
• /
• 1993

Microstructural dependence of magnetic property of RF/DC sputtered $Co_{69.0}Ni_{18.5}Cr_{12.5}/Cr$ double layer thin film was studied. Grain size was found to be decreased with substrate temperature in the range of $100-200^{\circ}C$ and Cr underlayer thickness(from $500\;{\AA}-2000\;{\AA}$). The peaks (200) and (1120) of X-ray diffraction patterns were evidently grown with the substrate temperature for the Cr underlayer and magnetic layer, respectively. The CoNiCr magnetic layer was found to be well epitaxialy grown on Cr underlayer, and subsequently the coercivity was enhanced.

• Journal of the Korean Magnetics Society
• /
• v.12 no.3
• /
• pp.88-93
• /
• 2002

Rapidly solidified NdFeB powders were mixed with fine powders of pure metal elements before CA-press employed to obtain a fully dense isotropic precursor. Subsequently, the precursor was deformed by CA-deformation to obtain an anisotropic magnet. The CA-deformed anisotropic NdFeB magnets with 0.3 wt.% Zn or Sn exhibited the coercivities about 80% higher (11.4. and 11.2 kOe, respectively) than that (6.4 kOe) of the additive-free magnet.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2016.11a
• /
• pp.242-246
• /
• 2016

해방70주년기념사업으로 일제강점기 동안에 조선인 강재징용으로 구축된 진진동굴에 대한 Geoinformatics 적용 학술조사를 통하여 구조물의 분포와 활용에 대한 내역을 규명하고, 일제에 의하여 자행된 국토훼손의 실상 및 만행을 출판 및 국내외 학술발표 자료로 할용 하고자 하였다. Geoinformatics 적용 조사탐사의 범위는 전국을 대상으로 하며, 서울지역, 인천지역, 대구지역, 부산지역, 제주지역, 대전지역 이외 도서지역 등 미 탐사지역에 대하여 지속가능한 수행을 추진함에 대한 문헌자료, 탐문조사, GIS분석, 지질광물분석 및 공동(空洞)조사 등으로 실시하며, 지표 및 지하조사의 방법은 위성영상분석(Remote Sensing), 물리탐사(전기/자력탐사) 및 동공 확인 시추(구경: 50mm)에 의한 도면작성으로 분포, 형상, 내용 등으로 다음과 같은 조사내용을 제기하였다. 일제동굴진지에 대한 geoinformatics기법의 접근에 의한 기반을 적용해 본 결과 문헌자료, 탐문조사, GIS분석, 지질광물분석 및 공동(空洞)조사 등으로 실시하며, 학술조사의 방법은 위성영상분석(Remote Sensing), 지구물리탐사(전기/자력탐사) 및 동공 확인 시추 등의 종합적인 정성적이며 정량적인 탐사에 의한 적용이 효과적인 결과를 초래할 수 있다는 결론에 도달하였다.

• Journal of Biomedical Engineering Research
• /
• v.24 no.3
• /
• pp.167-173
• /
• 2003

Measuring subtle neuromagnetic signals requires eliminating background noises. Especially, a SQUID magnetometer is very sensitive to the magnetic noise even from a distant source. As typical software methods, we use the synthetic gradiometer of the adaptive filtering to reduce the noises. In this article, we present noise reduction effects in our 37-channel SQUID magnetometer system by applying each method including the frequency-domain adaptive filtering and discuss a selective application of the methods to the detection of clinical magnetoencephalogram signals.