• Title/Summary/Keyword: 자동차 제동등

Search Result 49, Processing Time 0.024 seconds

A Study on Correlation Between Skid Distance and Pre-Braking Speed (활주거리와 제동전 속도간의 상관관계에 관한 연구)

  • Jeong, U-Taek;O, Yeong-Tae;Park, Yeong-Su;Ryu, Tae-Seon
    • Journal of Korean Society of Transportation
    • /
    • v.29 no.3
    • /
    • pp.115-122
    • /
    • 2011
  • This paper investigates the accuracy of the vehicle pre-braking speed estimated based upon measured skidding distance. Driver ordinarily takes sudden braking when urgent situation is developed in the front or when the driver is involved in an unexpected situation, and the driver may be inflicted upon an accident depending on the required stopping distance. Among factors influencing the stopping distance of vehicle such as recognition response time of driver, performance of vehicle's braking device, and state of road surface etc, pre-braking speed is seemingly the most important influencing factor. Currently, in the investigating section of traffic accidents, the state of overspeed is determined by the pre-skidding speed calculated based on the length of skid mark. In order to identify the accurate cause of the accident, it is strongly recommended that estimation of pre-braking speed should be estimated taking into account speed reduction during transient time. In this study, we propose a method for estimating more accurate exact speed information of vehicle at the time of traffic accident. The outcomes from this study potentially help better understanding of the characteristics of vehicle for traffic safety in the future.

Braking characteristics analysis of the magnetic actuator brake system(MABS) for emergency a car (비상 제동 기능을 지닌 전자력 브레이크 시스템(MABS)의 제동 특성 해석)

  • Choi, Sang-Min;Kang, Jong-Ho;Kim, Tae-Young;Jung, Hyun-Kyo
    • Proceedings of the KIEE Conference
    • /
    • 2006.07b
    • /
    • pp.849-850
    • /
    • 2006
  • 최근 자동차 브레이크의 전기적 시스템에 대한 연구가 활발히 진행되고 있다. 이와 관련하여 본 논문에서는 자기 엑추에이터 브레이크 시스템(MABS)을 분석하였다. 주행 도중 차량의 이상 및 긴급 상황 발생시 MABS는 전기적 메커니즘을 통해 차량을 제동할 수 있다. MABS는 회전하고 있는 휠에 초당 수십회 작용하여 점차적이고 효율적으로 휠을 제동한다. 이는 제동시간의 단축과 안정성에 있어 향상된 성능을 보인다. 본 연구에서는 유한요소법을 적용한 시뮬레이션을 통해 MABS의 동작 특성을 분석하고, 실제 자동차의 상황을 가정하여 제동하는데 소요되는 시간 및 작동 회수 등에 대해 분석하였다.

  • PDF

자동차 능동형 샤시시스템 개발동향

  • 허승진
    • Journal of the KSME
    • /
    • v.32 no.10
    • /
    • pp.847-857
    • /
    • 1992
  • 일반적으로 자동차의 샤시(chassis)라 하면 총체적인 개념에서 자동차로부터 차체(body)를 제외한 부분을 일컫는데, 구동 및 제동장치, 바퀴 현가장치, 조향장치, 타이어 및 휠 등이 이에 속한다. 1970년대 마이크로 컴퓨터의 응용기술이 도입되면서 엔진분야에서 시작한 자동차 전자화기술은 구동 및 제동분야에서의 전자제어식 제동잠김 및 구동 미끄럼방지 시스템(ABS/TCS)의 응용기 술을 거쳐 1980년 중반부터 차량의 현가 및 조향분야에서 능동형의 시스템이 개발되기 시작하 였다. 그 대표적인 예로서 자동차용 적응식 및 반 능동식 가변댐퍼(variable damper), 능동식 현가시스템(active suspension system) 그리고 4륜조향 시스템(four wheel steering system)을 들 수 있다. 1990년대에 들어서는 이러한 각종 능동형 시스템이 종합적으로 고려되어 설계되는 이 른바 자동차의 샤시 통합제어 시스템(chassis integrated control system)또는 능동형 샤시 시스템 (active chassis system)으로 발전되어 가고 있는 추세에 있다. 이 글에서는 최근에 가장 대표 적인 능동형 샤시시스템으로서 각종 능동식 현가시스템 및 4륜조향 시스템의 개발동향 및 기 술적, 경제적인 측면에서의 종합적인 검토를 하고자 한다.

  • PDF

On the braking torque distributions in the design of the brake system (제동 장치의 설계에 있어서 제동 토오크배분에 관하여)

  • 박래욱
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.2 no.2
    • /
    • pp.21-24
    • /
    • 1980
  • 차량의 제동장치는 제동시 차량의 조향안정성을 유지하면서 최소한의 제동거리를 확보하는 장 치라 할 수 있다. 제동시 차량의 조향안정성 유지와 최소제동거리를 확보하기 위해서는 차량의 적절한 제동능력에 필요한 전제동토오크를 전후륜의 제동장치에 적당하게 배분시켜야 한다. 그러나 차량의 각차륜의 하중 상태는 여러 가지 적재상태와 제동시중량이동 등에 따라 변하게 되므로 고정된 제동장치로서는 전후륜의 제동토오크를 가변시킬 수 없어 설계시 빈도가 높은 조건에 맞추어 제동장치의 구성부품을 확정할 수밖에 없다. 차량에 따라서는 축하중상태의 변 화가 큰 경우와 공용화를 위하여 여러 모델의 차량에 동일제동 장치를 적용하려고 할 경우에 문제점이 따르기 마련이다. 본고에서는 제동장치의 전후륜의 제동토오크 배분에 대하여 고찰하여 설계개념을 파악하고자 한다.

  • PDF

Basic configurations and working principles of automotive electrohydraulic control valves (자동차용 유압제어밸브의 기본구성 및 작동방식)

  • 홍예선
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.13 no.6
    • /
    • pp.30-38
    • /
    • 1991
  • 자동차의 제동장치, 조향장치, 자동 변속장치 등에 요구되는 큰 힘을 얻기 위하여 유압식 구동장치가 중량당 출력비가 높고 응답특성이 좋으며 과부하에 대한 방지기능이 간단하게 이루어 진다는 장점이 있기 때문이다. 본 고에서는 우리나라에서도 전자제어식 제동장치, 조향장치, 자동변속장치, 현가장치 등의 개발을 시도하고 있는 현 시점에서 기술축적이 가장 취약한 분야라고 볼 수 있는 자동차용 전기유압밸브의 기본적인 메카니즘에 대하여 종합적으로 소개하고자 한다.

  • PDF

Methodology for Estimating Safety Benefits of Advanced Driver Assistant Systems (첨단 운전자지원시스템의 교통안전 효과추정 방법론)

  • Jeong, Eunbi;Oh, Cheol
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.12 no.3
    • /
    • pp.65-77
    • /
    • 2013
  • Recent advanced sensors and communication technologies have been widely applied to advanced safety vehicle (ASV) for reducing traffic accident and injury severity. To apply the advanced safety vehicle technologies, it is important to quantify the safety benefits, which is a fundamental for justifying application. This study proposed a methodology for quantifying the effectiveness of the advanced driver assistant system (ADAS), and applied the methodology to lane departure warning system (LDWS) and automatic emergency braking system (AEBS) which are typical advanced driver assistant systems. When the proposed methodology is applied to 2008-2010 gyeonggi-province crash data, LDWS would reduce about 10~14% of relevant crashes such as head-on, run-off-the road, rollover and fixed-object collisions on the road. In addition, AEBS could potentially prevent about 50% of total rear-end crashes. The outcomes of this study support decision making for developing not only vehicular technology but also relevant safety policies.

Relationships Between Pre-Skidding and Pre-Braking Speed (활주 직전과 제동 직전 속도의 상관관계 규명에 관한 연구)

  • Ryu, Tae-Seon;Jeon, Jin-U;Park, Hong-Han;Lee, Su-Beom
    • Journal of Korean Society of Transportation
    • /
    • v.27 no.1
    • /
    • pp.43-51
    • /
    • 2009
  • This paper investigates the accuracy of vehicle pre-braking speed estimates based upon tire/roadway coefficient of friction (drag factor) measurements and skid mark measurements Data for pre-braking and pre-skidding speeds were collected to determine if there were any correlations between pre-braking speeds and pre-skidding speeds. Braking tests were performed on two vehicles using various measurement devices including a fifth wheel, a speed gun, and a vericom 2000. The vehicle speeds, braking distances, skid mark distances, and deceleration histories were recorded. From these data. coefficients of friction and vehicle pre-skidding speeds for the tested road surface were calculated. The pre-skidding speeds were then compared to the actual pre-braking speeds of the vehicles in order to establish relationships between pre-skidding and pre-braking speed. A correlation between the Pre-skidding speed and the actual pre-braking speed was established for the study data.

A Design Method of Three-phase IPMSM and Clamping Force Control of EMB for High-speed Train (고속철도차량의 EMB 적용을 위한 3상 IPMSM의 설계 및 제동압부력 제어)

  • Baek, Seung-Koo;Oh, Hyuck-Keun;Kwak, Min-ho;Kim, Seog-Won
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.19 no.4
    • /
    • pp.578-585
    • /
    • 2018
  • This paper proposes a design method for a 3-phase interior permanent magnet synchronous motor (IPMSM) and clamping force control method for an electro-mechanical brake (EMB) using co-simulation for a high-speed train (HST). A traditional pneumatic brake system needs much space for the compressor, brake reservoir, and air pipe. However, an EMB system uses up to 50% less space due to the use of a motor and electric wires for controlling the brake caliper. In addition, it can reduce the latency time for brake control because of the fast response and precise control. A train that has many brakes is advantageous for safety because of the control by sharing the braking force. In this paper, a driving method for a cam-shaft-type EMB is modeled. It is different from the ball-screw-type brakes that are widely used in automobiles. In addition, a co-simulation method is proposed using JMAG and Matlab/Simulink. The IPMSM was designed and analyzed with the JMAG tool, and the control system was simulated using Matlab/Simulink. The effectiveness of the co-simulation results of the mechanical clamping force and braking force was verified by comparison with the clamping force specifications of a HEMU-430X HST.

Automobile aerodynamics (자동차의 공기역학)

  • 강신영;정석호;김성훈
    • Journal of the korean Society of Automotive Engineers
    • /
    • v.9 no.3
    • /
    • pp.46-54
    • /
    • 1987
  • 자동차의 외형을 설계하는 과정에서 미적인 관점을 떠나 역학적으로 고려할 때에는 공기역학이 매우 중요하게 된다. 이 분야에서 연구하는 전문가에게는 잘 알려진 내용이 될지는 모르겠으나 자동차의 설계 및 개발에 종사하는 일반연구자에게는 공기역학에 관한 문헌 및 전문서적 또한 주 위에서 쉽게 얻을 수는 있으나 부담없이 인식되기에는 그리 쉬운 일은 아니다. 이와 관련하여 Car Stying Volume 50+1/2의 별책으로 간행된 특집호에 여러 가지 흥미있는 내용이 기술 설명 되어 있다. 이는 1985년 발행되었으며 일본자동차연구소에 재직중인 무능진리씨가 해설하였다. 이후 본 내용은 여기서 발췌함을 밝혀둔다. 자동차에 관한 공기역확은 주로 다음과 같은 성능 향상을 위하여 필요하다. (1) 주행연료비 절약 (2) 최고속도의 향상 (3) 고속주행시 조종안정성의 향상 (4) 횡풍에서 주행안전성 향상 (5) 엔진이나 제동장치 등의 냉각성능 향상 (6) 바람에 의한 소음의 감소 (7) 환기성능의 향상 (8) 제상성능의 향상 (9) 공기 조화성능의 향상 (10) 먼지 또는 오물의 부착방지 및 억제 (11) 창문 와이퍼의 작동 등이다.

  • PDF