• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.5
• /
• pp.543-550
• /
• 2021

Recently, there has been an increase of accidents related to the rise in the use of Personal Mobility Vehicle (PMV). To solve this problem, the National Assembly announced an amendment that restricted the use of PMV to bicycle roads and to prohibited for people under 13 years old to use PMV, but there is no detailed information about travel speed and safety. In this study, a survey was conducted by dividing the group into minors and adults based on the age of obtaining a driver's license to find out the direction of improvement of laws and systems about PMV. Our results showed that adults considered PMV as more dangerous (Adults 5.50, Minors 4.94) and the suggested age for PMV use was lower from minors than adults (Adults 15.70, Minors 13.85). We found that proper travel speed on bicycle roads differed according to the presence of a driveway (Driveway 26.21 km/h, Non-Driveway 23.55 km/h) and minors had higher a travel speed than adults on all types of bicycle road. Also, Helmets for PMV were seen as the most important safety equipment on all types of bicycle road. and the importance of other safety equipment differed according to the presence of a driveway (Driveway Front-Lighting, Non-Driveway Car Horn). Through this study, It proposes that we have to make new regulations about the use of front lights and horns, as well as enforcement measures that differentiate the speed on each bicycle road type as a way to improve the laws and systems for PMV.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.2
• /
• pp.33-43
• /
• 2022

The number of car crashes increases along with the increasing number of vehicles. Hence, diverse initiatives on traffic accidents have been implemented, targeting zero crash fatalities. According to the 3rd Traffic Safety Master Plan of 2016, the current standard selecting road accident black spots prioritizes locations with the high cumulative death toll. While this standard is suitable for roads that a city government manages to some extent, it is not suitable for roads less than 20 meters that a borough (Gu) handles. The roads under the supervision of a borough do not have enough death toll, and thus improvements on its road accident black spots are highly limited. In addition, discovering the causes of traffic accidents is not easy when the number of car accidents is obtained by considering only fatal accidents, which are relatively low in number. Therefore, including all traffic accidents might identify causes of accidents and result in better advancements. Therefore, this research follows rational decision-making and suggests new National Traffic Safety Master Plan standards. These new standards are obtained by comparing accident costs between the location of fatal crashes and road accident black spots. The analysis result shows that considering all types of accidents yields better results. For example, a Three-way Intersection in front of Zion Day Care Center, one of the selected spots under the current standard, has lower road crash costs than Sinchon Intersection, a selected spot under a new standard. Therefore, the study concludes that the standards to select road accident black spots need to include traffic accident severity and road crash costs.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.21-24
• /
• 2006

수소의 소규모 분산 생산 기술은 본격 적 인 수소 인프라가 도입되기 전에 연료전지 자동차의 수소 충전용이나 분산 발전형 연료전지의 수소 공급을 위해 필요하다. 생산 용량은 수소 기준으로 $20{\sim}100 Nm^3/hr$ 정도로 현재로선 천연가스의 수증기 개 질법이 가장 경제적인 공정으로 알려져 있다. 소규모 생산에 따른 열효율 저하를 줄이 기 위해 단위 공정들이 통합된 컴팩트 개질 시스템의 개발이 필요하다. 연료전지 자동차용 수소 인프라 조기 구축을 위하여 수소충전소 구축과 국산화 천연가스 수증기 개질기 개발을 병행하여 진행하였다. 수소 충전소 구축 부분은 충전소 부지 확보, 건물 건축, 각종 유틸리 티 설치의 토목 부분과 천연가스 개질형 수소 제조 유닛 설치, 수소 압축, 저장, 디스펜싱 시스템 설치를 포함하고 있으며 고압 설비에 대한 인허가 대응 및 안전대책 작업도 진행하였다. 구축된 수소충전소는 향후 연료전지 자동차 연계 실증 프로그램에 활용할 수 있다. 국산화 핵심 기술 개발을 위하여 열 및 시스템 통합 설계에 의 해 천연가스 수증기 개질기를 제작하고 내부 열교환 구조에 따른 개질기의 성능을 평가하였다. 개발된 개질기는 개질온도 $720^{\circ}C$, 수증기 대 카본 비 2.7의 운전조건에서 $23Nm^3/h$ 이상의 수소 생산이 가능하였으며 73% 이상의 개질 효율을 나타내었다. 개발된 천연가스 수증기 개질기는 향후 수소 정제용 PSA(Pressure Swing Adsorption) 시스템과 연계하여 수소충전소 국산화 엔지니어링 설계 패키지 개발의 핵심 기 술로 사용할 계획이다.시간 정도 운전한 후 시스템을 정지하였다 메탄 전환율과 일산화 탄소 농도, 열효율을 모니터링 하고 있으며, 현재까지 초기 성능을 그대로 유지하고 있다. 앞으로 일일시동-정지 운전 시험을 지속하면서 초기 시동 특성 및 부하 변동에 따른 응답 특성 개선, 그리고 연료전지와의 연계 운전을 실시할 예정이다 한다. 단위 전지 운전 온도 $130^{\circ}C$, 상대습도 37%의 운전 조건에서도 상당히 우수한 전지 성능을 보임에 따라 고온/저가습 조건에서 상용 Nafion 112 막보다 우수한 막 특성을 나타냄을 확인하였다.소/배후방사능비는 각각 $2.18{\pm}0.03,\;2.56{\pm}0.11,\;3.08{\pm}0.18,\;3.77{\pm}0.17,\;4.70{\pm}0.45$ 그리고 $5.59{\pm}0.40$이었고, $^{67}Ga$-citrate의 경우 2시간, 24시간, 48시간에 $3.06{\pm}0.84,\;4.12{\pm}0.54\;4.55{\pm}0.74 $이었다. 결론 : Transferrin에 $^{99m}Tc$을 이용한 방사성표지가 성공적으로 이루어졌고, $^{99m}Tc$-transferrin의 표지효율은 8시간까지 95% 이상의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.301-308
• /
• 2018

This study explores an analytical mathematical model designed to estimate the optimal debt ratio of the Korean automobile industry, which has a more significant effect on the national economy than that of other industries, and attempts to estimate the optimal debt ratio based on objective data. The analytical model is based on ROA and ROE which uses the debt ratio as an independent variable and employs ROS, TAT, and NFCL as the related parameters. Regarding the NFCL, the optimal debt ratio is usually defined as the debt ratio that maximizes the ROA and ROE and is calculated using analytical procedures, such as by adding an equation that considers the debt ratio and the linearity relationship to the analytical model. This is because the optimal debt ratio can be calculated reliably by making use of an estimated value within a certain range, which is derived from more than two calculations rather than a single estimation starting from one calculation formula. In this study, for the estimation of the optimal debt ratio, the ROA and ROE are expressed as a quadratic equation with the debt ratio as the independent variable. Using this analysis procedure, the optimal debt ratio obtained using the data from the Korean automobile industry over a sixteen year period, which would optimize the profitability of the Korean automobile industry, was found to be 188% of the debt ratio in the ROA and 213% of the debt ratio in the ROE. This result was obtained by overcoming the problem of the reliability of the estimation value in spite of the limitations of the logical theory of this study, and can be interpreted as meaning that maintaining a debt ratio of 188% to 213% can enhance the profitability and reduce the risks in the Korean automobile industry. Furthermore, this indicates that the existing debt ratio of the Korean automobile industry is lower than the optimal value within the estimated range. Consequently, it is necessary for corporations to change their future debt ratio policies, given that the purpose of debt ratio management is to maintain safety and increase profitability, and to take into account the characteristics of the specific industry.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.75-82
• /
• 2011

There is the uncertain period of the construction in case of the products meeting the quality standard of KS M 6080, the quality is degraded because of the abrasive loss of the paint caused by vehicle tires as the traffic amount increases and of the loss and detachment of the glass beads providing the retroreflective function. The abrupt degradation of visibility causes the high frequency of traffic accidents at night and increases the traffic accident rate. Additional supplementary construction induces the direct material and construction costs. As the more cost induction effect than the direct cost, the traffic jam caused by the additional construction increases the indirect social costs such as time cost and vehicle cost. Hence, the study is concerned with performing the abrasion resistance test based on the EN 1436 standard to check and improve the quality of various road marking materials resulting in improving the durability of road marking materials. However, even though the difference in the durability lifetime of resins(binders) is bibliographically or theoretically clear, there was no difference in the durability lifetime (retroreflectivity aspect) of the road marking paint using these binders. The reason is that the bonding of beads was very insufficient or that the cross density caused by crack or freshness was low. Moreover, the measured wet retroreflectivity was distributed as the Rw3 or higher class in average on the basis of EN 1436 but was very insufficient on the basis of the minimum wet threshold retroreflectivity with 100mcd/($m^2{\cdot}lx$) managed overseas.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.1
• /
• pp.113-119
• /
• 2014

Recently, R.O.K. Navy is increasing re-usability of design data and application of M&S(Modeling and Simulation) through the establishment of collaborative product development environment focused on Naval Ship Product Model(NSPM). As a result, the reliability of the result of design is getting better, and furthermore, a study to improve quality of construction through simulation of production/operation is in progress. Accordingly, the database construction of design data and the DB(Database) quality become important, but there was not research related to those or it was just initial state. This paper conducted research about system of the quality verification process of shape elements which compose NSPM based on the quality verification guideline of NSPM as the result of the precedent study. The hull surface was limited as verification object. The study to verify two things that application of basic drawing by the cad model of hull surface, and whether there is error in the geometric quality of cad model was progressed. To achieve this goal, the verification criteria and algorithm were defined and the prototype system which is based on was developed.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.5
• /
• pp.919-939
• /
• 2021

As a next-generation communication technology, 5G networks are capable of handling large amounts of traffic based on higher speeds, shorter communication delays, and higher connectivity compared to 4G networks. In this 5G network environment, base stations are installed all over the city at high density due to their characteristics, and are connected to user terminals to provide services. Therefore, if the base station is damaged by a malicious attacker, it is expected to cause great damage to users and society as a whole. So the need for secure communication equipment such as 5G base stations has emerged. Therefore, in this paper, we propose the security functional requirements derived using threat modeling, a systematic methodology for 5G base stations, and the security assurance requirements at the level that can cope with the backdoor issues. The security requirements proposed in this paper can be used for base station design and development to construct a secure network environment as a security evaluation standard for 5G base stations.

• Journal of the Korean Institute of Gas
• /
• v.25 no.6
• /
• pp.7-13
• /
• 2021

Various research has been done on fires and explosions at gas stations at home and abroad. However, only studies of off-site damage in the event of fire at the gas station were conducted, and research on fire at the auxiliary facilities in the gas station was insufficient. The gas station is a place where anyone can easily access dangerous goods. As the risk of fire increases due to the recent increase of auxiliary facilities such as convenience stores and car repair shops in gas stations, it is important to detect the effects of fire on the main oil refinery in case of fire and to verify the validity of existing regulations. In this thesis, we conducted a study to find out the effect of radiation heat on the separation between fixed and fixed oil reactors in the event of fire at an auxiliary facility. Simulation was modelled using FDS 5.5.3 Version, and the size of the fire source was configured with 13 fire assessment devices and the heat emission rate per unit area was entered. Simulation shows that the separation distance of 2 m does not secure the safety of the gas pump in the event of fire at the auxiliary facilities, and radiation heat does not damage at the separation distance of at least 4 m. Accordingly, facilities that can block radiant heat in the event of fire at auxiliary facilities, and measures to limit the use of auxiliary facilities or to re-impose the separation between buildings and fixtures will be needed.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.2
• /
• pp.164-181
• /
• 2023

In a low speed limit environment, the speed limit tolerance of automated traffic enforcement devices is very high, which is one of the main factors for the low compliance rate. Therefore, in this study, we aimed to the improve the speed limit tolerance and to present a new standard. The effects of the operator and user errors that can cause speeding by drivers were analyzed. Based on the results of the analysis, an improvement of the tolerance was proposed by applying an error in the enforcement device and GPS speed. In addition, long-term expected safety effects such as the accident rate and severity were estimated from the operator's perspective when improving the tolerance. As a result of the estimation, the speed limit compliance rate, accident rate, and change rate of a number of severe accidents due to speed change, and pedestrian traffic accident mortality rate were all improved in all speed limit environments. The introduction of the proposed improvement is expected to improve road safety significantly.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.1
• /
• pp.1-9
• /
• 2010

The purpose of this study is to analyze the bumper mounting structure of passenger vehicles at low speed collision. In order to improve the repairability and damageability of the vehicle, the low speed crash tests of RCAR(Research Council for Automobile Repairs) standard(front & rear 15km/h 40% offset crash test) were carried out for analysis of 3 different types of bumper mounting structures. The results of experiments show that the impact energy absorbing ability of bumper stay with rectangular crash box type vehicle which is inserted into the bumper rail was superior to another two different bumper mounting structures that are applied to many passenger vehicles. In this thesis, well designed bumper mounting structure such as rectangular crash box type can enhance the safety of occupants as well as contribute to reduce repair cost at low collision accident by improving repairability and damageability of vehicle.