• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.3
• /
• pp.80-86
• /
• 2008

Recently, controlled auto ignition(CAI) in gasoline engines are drawing more attentions due to its extremely low level of NOx emissions and potentials in lowering the fuel consumption rate. The one of the key techniques for realizing CAI combustion in engines is the control of valve system. Since the valve linkage system with higher complexity, or even earn-less valve systems, such as electro-hydraulic and electro-magnetic system, are adopted in CAI engines, it is not easy to estimate the valve lift profile from earn profiles. Therefore new measurement techniques for valve lift in CAI engines have been tried and tested. In this paper, hole type valve lift sensor was developed and tested to check the applicability in CAI engines. The valve lifts could be obtained from the sensor signal, which depends on the distance from the sensor to magnet attached to valve. Various engine speeds, ranging from 2,000 to 6,000 rpm, and valve lifts, maximum up to 9.7 mm, were tested. It was found that the sensor output for valve lift had accuracy of 98% in comparison with the basic specifications of valve lift through improvements of sensor driving circuit.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.1-8
• /
• 2019

In the rapidly aging society, the number of wheelchair users is increasing steadily. On the other hand, it is almost impossible for a disabled person using a wheelchair to use express buses. Therefore, it is necessary to develop an express bus that can secure the rights of wheelchair users. For these special types of express buses, it is required to develop a special entrance and lift system. The development of a wheelchair entrance system for the express buses requires design modification, retrofit, and reinforcement of the bus frame. This study evaluated the structural integrity of an entrance system for wheelchair users using a finite element method. Torsional stiffness and modal analysis were performed through structural analysis. Through sensitivity analysis, optimization was performed to reduce the weight of the frame. These results on the wheelchair entrance system are expected to be utilized in the vehicle modification and welfare industries.

• Journal of Technology Innovation
• /
• v.26 no.4
• /
• pp.1-28
• /
• 2018

With the growing number of emerging carmakers, automotive parts manufacturers have to penetrate into emerging markets. They can provide large existing carmakers with fully customized parts because of economies scale, but cannot do this for small emerging carmakers due to their small and highly volatile volume order. Once the order by an emerging carmaker is placed, a part manufacturer is exposed to high risks both of decrease in profit margin and high opportunity cost. The platform-based mass customization can be a solution for cost reduction, but the risks of volatility in volume hard to manage. Tackling this issue, we presents a method of optimizing the product portfolio to maximize profits while managing volatility of volume order by emerging carmakers at an affordable level. It is the first robust product portfolio method to keep the scaled deviation of profits at a fixed level under volume order uncertainty. Also, the effect of on the platform-based mass customization on cost is considered. This model can be a building block of conservative market penetration as well as product development strategy while minimizing the financial risks. We conducted an empirical study of a part manufacturer targeting on eighteen automobile manufacturers in North America, Europe and Asia with it powered lift gate.