• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.290-297
• /
• 2011

In present, evaluation method for car cabin air quality has been developed in ISO, China, Japan. Also The management standard for new produced car has been applied since 1, July, 2010. To manage car cabin air quality, It is important to evaluate VOC emitted from interior material. In this study, complete component of door trim armrest was evaluated in accordance with ISO 12219-5, cut component was evaluated in accordance with ISO 12219-3. The vapour gas was collected with stainless tube packed with Tenax TA and analyzed with TD-GC/MS. It was confirmed that emission rate of each compounds was difficult in each evaluation method. As a result, to evaluating each components composing door trim armrest, main sources of emitting VOCs in door trim armrest were PP substrate and adhesive.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.41-46
• /
• 2007

Lightweight multi-layered boards with high stiffness for the automotive interior trims were developed, which were composed of a single material. The boards were constructed in the form of substrate/core/substrate with newly developed materials. The materials which have high tensile strength and elongation were selected for the substrate materials, and those which have high compressive strength and low density were selected for the core materials. 25 types of multi-layered boards were fabricated using the selected substrate and core materials. The compatibility with the skin materials, the formability and the tensile strength and flexural strength of the specimens were evaluated. The results show that three types of multi-layered boards(Kenboard/EPP foam/Kenboard, Twintex/PP honeycomb/Twintex, Curv sheet/EPP foam/Curv sheet) are appropriate for the automotive interior trims. Considering the ease of materials supply and the economical aspect, Kenboard/EPP foam/Kenboard is thought to be the most realistic alternative.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.689-692
• /
• 2010

일반형 자동차 내장부품은 외부가 플라스틱 사출 성형한 형태로 사용되지만, 고급 차종은 내장재의 미감이나 질감을 위하여 사출물 표면에 엠보싱 무늬가 형성된 표피재가 수지에 추가로 부착되어 제작된다. 부착하는 방법은 한 장비에서 저압 사출 후 플라스틱이 완전 응고 전에 표피재를 넣고 압입하는 저압 사출법과 표피재 수지를 기 사출된 제품위에 놓고 압착시키는 압착법이 있으나 이 두 방법 모두 엠보싱 무늬가 형성된 표피재를 넣고 작업하기 때문에 고온 압착시 기존 무늬가 찌그러지고 코너 부위가 경화되어 기존의 질감을 얻지 못하며, 치수 공차가 변형되어 불량률이 증가하므로 이를 시급히 개선할 새로운 제조 기술의 필요성이 대두된다. 본 연구는 가열 압착기로 지그 및 금형을 새로 개발하여 도어 트림 제조시, 기 사출물을 금형 쪽으로 기 조직을 삽입한 후 엠보싱 무늬가 없는 원소재 표피재로 상부 금형 쪽으로 소재조직을 진공으로 흡입하여 무늬를 성형한 후 하강시켜, 기 사출물에 압착시키는 가열 압착으로 엠보싱무늬의 손상을 방지하는 금형을 제안하였으며 그에 대한 해석, 설계, 실험을 통하여 성능을 평가 분석 하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.3
• /
• pp.81-87
• /
• 2009

Lightweight board has been used for manufacturing various fields of automotive interior trims for years. The GMPU board was constructed with glass fiber mat, honeycomb and polyurethane foamed using polyol and isocyanate materials which were sprayed by robot that is interlocked foaming machine. For more lightweight and cost reduction this paper shows how to optimize GMPU process parameters that related to foaming condition, robot position and robot velocity for polyurethane weight. The results show that flexural strength and modulus of board's specimens were evaluated by robot velocity and moving pattern. Based on that, a innovative process was developed for more lightweight and cost reduction.

• Clean Technology
• /
• v.20 no.3
• /
• pp.232-240
• /
• 2014

The significance of thermoplastic polyolefin polypropylene (PP) lies in its potential to replace polyvinyl chloride (PVC), the most widely used material for automobile interiors (door trim, dash board), which discharges harmful compounds in certain conditions. Another benefit of PP (0.855 amorphous - 0.946 crystalline $g/cm^3$) is its low density compared to that of PVC ($1.1-1.45g/cm^3$), which reduces vehicle weight. Market demand for eco-friendly water-based adhesive/coating material is rising significantly as a substitute for solvent-based adhesive/coating material which emits VOC and causes harmful working conditions. Under such context, in this study, a series of eco-friendly waterborne polyurethane-urea primer (a paint product that allows finishing paint to adhere much better than if it were used alone) for hydrophobic PP were prepared from different mix of DMPA content, NCO/OH molar ratio, various wt% of silicone diol and various soft segment content, among which DMPA of 21 mole %, NCO/OH molar ratio of 1.2, modified silicone diol of 5 wt% and soft segment content of 73 wt% led to good adhesion strength. Additionally, the incorporation of optimum content of additives (0.5 wt% dispersing agent, 0.5 wt% levelling agent, 1.5 wt% antifoaming agent, 3.0 wt% matting agent) into the optimum waterborne polyurethane-urea also enabled good stability, levelling, antifoaming and non-glossy.