• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1639-1644
• /
• 2018

Unlike internal combustion engines, electric cars have little engine sound and very quiet, causing the following problems to occur. First of all, pedestrians are a threat to safety because they can't feel the car approaching. The driver is also unable to recognize how fast his car is driving at a certain speed. To solve these problems, electric cars should be artificially created and reused. This paper examines the problems of the Sampling engine sound currently being used and uses the engine sound to produce a sound engine sound for the solution. The sampling engine sound has some limitations in making natural engine sounds. To overcome this problem, we studied two methods of using software synthesizers. They found subtractive synthsizing and wavetable synthsizing, which compared wavetabe synthsizing with actual engine, sampling and subtractive methods to find the most similar to real engine sound. We found that data usage and production cost are more advantageous than sampling method and subtractive syndication method.

• Journal of the Korean Institute of Gas
• /
• v.17 no.6
• /
• pp.15-19
• /
• 2013

This paper is to analyze and study the cause of fire examples produced because of short phenomenon by electric connecting damage and contacting engine over-heating with combustible materials in engine room of vehicle. In the first example, it knew the fact that the fire produced by contacting with body of vehicle because of loosed of bracket bolt for wire fixing that installed on the transmission case the battery power cable supply the power from battery of engine room to starting motor. In the second example, it certified the fire by short phenomenon because of insulation tape melting wound wiring lined from battery to starting motor. In the third example, it sought for fire's cause that melting phenomenon the wire coating by overheated engine as the wire disconnected with connector by the vibration. Therefore, the fire of system including engine electric made in the danger the people in the car by failure of engine and other system. And than, the car's driver must manage and examine a vehicle conscientiously.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.1-12
• /
• 2008

The major components of an engine are the cylinder block, cylinder head, crankshaft, connecting rod, and camshaft, which are more popularly known as the 5 C's. Thus, the engine shop usually consists of six sub-lines, including five machining lines and one assembly line. The flow line is the typical concept of the layout when the engineer designs the engine shop. This paper introduces a simulation study regarding the new crankshaft machining line in a Korean automotive factory. The major factors for designing the machining line are considered, and their effects on the system performance are evaluated with a three-dimensional(3D) simulation model that is developed with $QUEST^{(R)}$. The initial layout is analyzed using the simulation model, and we suggest some ideas for improvement.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.9
• /
• pp.801-805
• /
• 2016

In this paper, engine clutch engagement shock is analyzed during the mode change of plug-in hybrid electric vehicles. Multi-driving mode includes the EV (electric vehicle) mode, HEV (hybrid electric vehicle) mode, and engine operating mode. Depending on the mode change, the engine clutch is either engaged or disengaged. The magnitude of shock during clutch engagement is very important because it impacts vehicle acceleration and clutch synchronization speed, which affects ride comfort substantially. The performance simulator of plug-in hybrid electric vehicles was developed using MATLAB/Simulink. The simulation results show that the mode change control algorithm is necessary for minimizing shock during clutch engagement.

• Journal of the korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.17-22
• /
• 1996

티타늄합금을 사용하여 흡기밸브, 배기밸브, 밸브스프링 리테이너를 시제작하였다. FEM 구조해석결과와 모터링 내구실험결과를 통해 이들 부품들이 신뢰성을 가지는 것으로 판명되었다. 엔진성능실험을 통해서 고속영역에서 엔진출력 및 토오크가 3-4% 향상되었다. 단 향후 엔진내구실험을 통하여 충분한 내구성검증이 필요하다고 판단된다.

• Journal of KSNVE
• /
• v.11 no.2
• /
• pp.207-215
• /
• 2001

삶의 질적 향상에 대한 소비자의 욕구가 증대되고 환경문제에 대한 관심이 실생활과 밀접한 관계가 있는 자동차에 미치게 되면서, 배기가스 규제 강화와 함께 소음에 대한 소비자의 요구 수준이 점점 높아지고 있다. 자동차의 소음은 일반적으로 주행시 외부로 방사되는 주행소음(pass-by noise)과 승차감에 영향을 미치는 실내소음으로 구분할 수 있는데, 주행시 외부소음은 국내 2002년 법규와 유럽의 법규 등에서 그 규제가 점점 강화되고 있고, 실내소음은 자동차의 상품성을 좌우하는 요소로서 그 중요성이 점점 커지고 있다 각 자동차 생산업체들은 NVH (noise, vibration and harshness) 개선에 많은 관심을 두고 있으며, 특히 주행소음 및 실내소음 전반에 있어 발생요인으로 큰 비중을 차지하고 있는 파워트레인(엔진 및 트랜스미션)에 대한 NVH 개선에 많은 투자를 하고 있다. 최근 개발되고 있는 차세대 자동차 엔진들을 보아도 EU의 2005년 EURO-IV배기가스 규제 및 북미의 SULEV 규제를 만족함과 동시에, 연비 향상과 NVH 향상을 개발 목표로 하고 있음을 알 수 있다.(중략)

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1594-1599
• /
• 2015

The world car industry is in an era of internal combustion engines in the past 100 years of environmental, energy and IT is eco-friendly, high-tech cars technologies are bringing an era of change. Until now, the study of new technologies in automobile research and development has been focused on. The car's new technology development is also important, but it's cutting-edge technology is used in the car before the car's performance, and became an important point in the customer experience improvement problems. New technology development, as well as effective for existing technology applied is also important. This study was to determine the effects of temperature and the performance of automobile engine and determine the cause of the content in accordance with the type(tap water, distilled water, underground water) of anti-freeze and water that is contained in the automotive engine cooling water for the effective application of the anti-freeze. In the freezing point of the coolant -10, -20, -30, -40, $-50^{\circ}C$ dynamo performance test was conducted with the numerical analysis. Water (distilled water) were measured at the reference point peak performance 71.112, 99.622hp freezing $-10^{\circ}C$.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.2
• /
• pp.60-68
• /
• 1996

디젤 엔진의 분사연료를 연소실 내부에 마련된 작은 돌출부에 충돌시켜 액적을 작게 부수고 연료가 연소실 내부에 고루 분포할 수 있도록 하여 여러 가 지 엔진성능향상을 도모한 새로운 디젤 연소실 시스템이 최근 제시되고 있다. 이들 시스템은 피스톤 내부 혹은 엔진헤드 부위에 분사연료 충돌부를 두고 있는데, 여기에서는 이 새로운 시스템 개발에 있어 고려되어야 할 몇 가지 중요 요인들에 중점을 두어 분석하였다. 결과로서 분사압력, 사노즐크기, 주위공기 온도와 압력의 변화가 분무 평균입경과 분무연료의 분포에 미치는 영향을 제시하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.16 no.6
• /
• pp.1-8
• /
• 1994

• Journal of the KSME
• /
• v.57 no.5
• /
• pp.53-55
• /
• 2017

이 글에서는 자동차 엔진 부품의 열피로 파손의 개요와 연구동향에 대해 설명하고자 한다.