• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.632-638
• /
• 2011

Recently, it has been studying for the polishing process of micro parts widely. However, present MR polishing system, it is difficult to minimize electromagnet and to polish sphere or slope parts. Then, it can not be obtained demanded surface quality. In this study, material removal characteristics of BK7 glass using round endmill type MR polishing system were investigated through series of experiment. The experiments were investigated by changing imposed polishing conditions, such as rotational speed and polishing depth. As a results, very high material removal was obtained at 0.7mm gap distance, 1,980rpm.

• 한국기계가공학회지
• /
• 제4권1호
• /
• pp.7-12
• /
• 2005

An internal finishing process by the application of magnetic abrasive finishing has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, another method of magnetic abrasive machining in which the N and S magnetic poles are vibrated and a workpiece is rotated only is tried in a non-ferromagnetic pipe(SUS304), and its finishing characteristics is experimently investigated by various effective factors such as vibrating frequency and amplitude. From the experimental results, it is found that the vibration effects of magnetic poles on the finishing characteristics are large in internal finishing.

• 광학세계
• /
• 통권109호
• /
• pp.52-55
• /
• 2007

• 대한기계학회논문집A
• /
• 제41권4호
• /
• pp.251-255
• /
• 2017

미세 패턴의 기계적 가공에서는 버의 발생이 불가피하고, 패턴과 버의 크기가 매우 작아 이를 구분하기 어렵다. 본 연구에서는 turning machine을 이용하여, 원통형 공작물의 옆면에 패턴의 피치와 높이가 각각 60, $1{\mu}m$인 마이크로 패턴을 제작하고, 패턴의 형상을 이용하여 버의 형상과 생성 메커니즘을 정의하였다. 또한, 자기연마 디버링을 이용하여 마이크로 패턴의 정밀도를 높이고자 하였다. 그 결과, 미세패턴의 제작 시, 공구의 이송방향에 따라 버의 생성방향이 결정됨을 확인할 수 있었다. 또한, 자기연마디버링 공정에서 자속밀도와 공구의 회전속도가 각각 40mT, 1600rpm일 때, 패턴의 높이는 $1.018{\mu}m$로 측정되었으며, 자기연마 디버링에 가장 적합한 조건임을 알 수 있었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.191-192
• /
• 2011

• 대한기계학회논문집A
• /
• 제35권8호
• /
• pp.899-904
• /
• 2011

본 연구는 마이크로 머시닝을 적용한 유동채널가공에서 버의 발생과 제거에 관한 연구이다. AISI316 스테인리스강의 마이크로 유동채널가공은 마이크로 밀링과 자기 디버링을 결합하여 실시하였다. 먼저 마이크로 밀링으로 유동채널을 가공하였고, 가공조건에 따라 마이크로 채널주변에 미소 버가생성됨을 확인하였다. 미소 버를 제거하기 위해서 자기 디버링을 행하였다. AISI316 스테인리스강은 비자성체로 자기연마에 큰 영향을 미치는 자속밀도가 매우 낮은 금속이다. 본 연구에서는 공작물의 자속밀도를 향상시키기 위해서 자기 테이블을 개발하여 이를 자기연마 디버링에 적용하였고, 주사전자현미경(SEM)과 표면형상기로 자기 디버링에 의한 버의 제거효과를 측정하였다.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.47-53
• /
• 2001

Results ar presented of a new process for internal precision finishing of slender fine ceramic pipes using a magnetic field generated by a permanent magnets. For finishing the interior surface of a long pipe, a new type of finishing equipment was developed which can be very easily used in an industrial surrounding. In general, the pipe is so slender that a conventional finishing tool is hardly inserted into the pipe deeply, being impossible to finish. Therefore, a new technology has been considered to finish inside of a slender ceramic pipe by a simple technique. In this experimental, Magnetic Abrasive Machining is applied for the inner surface of silicon nitride fine ceramic pipe using ferromagnetic particles mixed with chromium-oxide powder. It is shown the initial roughness of 2.6㎛ Ry(0.42㎛ Ra) in the inside surface can be precisely finished to the roughness of 0.1㎛ Ry(0.01㎛ Ra). This paper discusses the outline of the processing by the application of magnetic abrasive machining and a few finishing characteristics.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.629-632
• /
• 2005

ELID(ELectrolytic In-process Dressing) grinding is an excellent technique for mirror grinding of various advanced metallic or nonmetallic materials. A polishing process is also required for elimination of scratches present on ELID grinded surfaces. MAP(Magnetic Assisted Polishing) has been used as a polishing method due to its high polishing efficiency and to its resulting in a superior surface quality. This study describes an effective fabrication method combining ELID and MAP of nano-precision mirror grinding for glass-lens molding mould, such as WC-Co, which are extensively used in precision tooling material. And for the optics glass-ceramic named Zerodure, which is extensively used in precision optics components too. The experimental results show that the combined method is very effective in reducing the time required for final polishing. The best surface roughness of the polished glass-ceramic was within 1.7nm Ra in this study.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.960-963
• /
• 2001

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, another method of magnetic abrasive machining in which the N and S magnetic poles are vibrated and a workpiece is rotated only is tried in a non-ferromagnetic pipe(SUS304), and its finishing characteristics is experimental results, it is found that the vibration effects of magnetic poles on the finishing characteristics are large in internal finishing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.779-782
• /
• 2000

An internal finishing process by the application of magnetic abrasive machining has been developed as a new technology to obtain a fine inner surface of pipe. In this paper, the finishing process of a non-ferromagnetic pipe by a static magnetic field method is introduced and its finishing characteristics is discussed with effective factors by various experiments. From these experimental results, it is found that the proper suppling quantity of magnetic abrasives per diameter of pipe is important, and the inner surface roughness of pipe is not changed much after certain critical finishing time. As a result of this investigation the 3.2$\mu$m Rmax in inner surface roughness of stainless steel pipe is improved to 0.7$\mu$m Rmax after 6 minutes finishing.