• Journal of the Korean Geophysical Society
• /
• v.2 no.1
• /
• pp.75-88
• /
• 1999

A recent major subject of geophysical exploration is research into 3-D subsurface imaging with a composite information from the various geophysical data. In an attempt to interpret Schlumberger sounding data for the study area in 2-D and 3-D view, resistivity imaging was firstly performed and then pseudo-3-D resistivity volume was reconstructed by interpolating several 1-D resistivity plots. Electrical resistivity discontinuities such as fracture zone were successfully clarified in pseudo-3-D resistivity volume. The low resistivity zone mainly associated with fracture zone appears to develop down to granitic basement in the central part of the study area. Seismic velocity near the lineament is estimated to be approximately as small as 3,000 m/s, and weathering-layer for the southeastern part is interpreted to be deeper than for the northwestern part. Geophysical attributes such as electrical resistivity, seismic velocity, radioactivity for the Chojeong Area were analysed by utilizing a GIS software Arc/Info. The major fault boundaries and fracture zones were resolved through image enhancement of composite section (electrical resistivity and seismic refraction data) and were interpreted to develop in the southeastern part of the area, as characterized by low electrical resistivity and low seismic velocity. However, radioactivity attribute was found to be less sensitive to geological discontinuities, compared to resistivity and seismic velocity attributes.

• Journal of Life Science
• /
• v.20 no.5
• /
• pp.639-643
• /
• 2010

Sudden deaths have occurred in feedlot cattle with marked necro-hemorrhagic enteritis of the jejunum, ileum and colon. Suckling beef calves are the most frequently affected. Over-consumption of large amounts of milk, inadequate colostrum intake, chilling and stress are conducive to the development of enterotoxemia. Enterotoxemia caused by Clostridium perfringens type D mostly occurs following a sudden change of diet, particularly to feeds made richer in order to grow the cattle to market weight in feedlots. During July 2006, sudden deaths of cattle occurred in the Youngcheon regional area of Gyeongbuk province. There were no significant clinical signs except anorexia, depression, intermittent diarrhea and mild respiratory failure. Histological findings revealed a prominent intranuclear inclusion as well as infiltration of the globular leukocytes in various organs including the heart, kidneys, liver, spleen and lymph nodes. Spleen and lymphatic tissues showed lymphatic necrosis and a starry sky appearance. In the submucosa of the small intestines, basophilic aggregation was detected with massive infiltration of the globular leukocytes and eosinophils. Gram staining for the tissue sections containing inclusions of the small intestines revealed a positive histochemical reaction. Taken together, we suggest that Clostridium perfringens type D-induced enterotoxemia is determined to be the cause of sudden death of feedlot cattle.

• Journal of the Korean Chemical Society
• /
• v.39 no.8
• /
• pp.657-665
• /
• 1995

The oxidation of various benzyl ethers and benzyl alkyl ethers to benzoates has been studied in two-phase system of $CH_3CO_2Et$ and aqueous NaOCl (6.6 mol eq.). The oxidant N-oxo-4-methoxy-2,2,6,6-tetramethylpiperidium bromide (N-oxoammonium salt) was prepared in situ and recycled by addition of 4-methoxy-2,2,6,6-tetramethylpiperidine-1-oxyl (0.03 mol eq., 4-methoxy-TEMPO), co-catalyst KBr (0.03mol eq.) and second oxidant NaOCl. Thus the catalytic amount of 4-methoxy-TEMPO was used. An adjustment of the pH value of below 8.0 was also required for this reaction with 2.5 hr of reaction time at 0∼5$^{\circ}C$. Under these conditions benzyl ethers were oxidized to benzoates. The selectivity of oxidation of benzyl alkyl ethers is dependent on the acidity of hydrogen and steric effect of alkyl group.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.1
• /
• pp.51-56
• /
• 2003

The main goal of existing mobile robot system was a complete autonomous navigation and the vision information was just used as an assistant way such as monitoring For this reason, the researches have been going towards sophistication of autonomousness gradually and the production costs also has been risen. However, it is also important to control remotely an inexpensive mobile robot system which has no intelligence at all. Such systems may be much more effective than fully autonomous systems in practice. Visual information from a simple camera and distance information from ultrasonic sensors are used for this system. Collision avoidance becomes the most important problem for this system. In this paper, we developed a force feedback joystick to control the robot system remotely with collision avoiding capability. Fuzzy logic is used for the algorithm in order to implement the expert s knowledge intelligently. Some experimental results show the force feedback joystick werks very well.

• Journal of the Korean Institute of Rural Architecture
• /
• v.23 no.4
• /
• pp.1-12
• /
• 2021

Recently, the use of unmanned aerial vehicles (UAVs) is increasing in the field of land information acquisition and terrain exploration through high-altitude aerial photography. High-altitude aerial photography is suitable for large-scale geographic information collection, but has the disadvantage that it is difficult to accurately collect small-scale geographic information. Therefore, this study used low-altitude UAV to monitor changes in small rural spaces around rural resources, and the results are as follows. First, the low-altitude aerial imagery had a very high spatial resolution, so it was effective in reading and analyzing topographic features. Second, an area with a large number of aerial images and a complex topography had a large amount of point clouds to be extracted, and the number of point clouds affects the three-dimensional quality of rural space. Third, 3D mapping technology using point cloud is effective for monitoring rural space and rural resources because it enables observation and comparison of parts that cannot be read from general aerial images. In this study, the possibility of rural space analysis of low-altitude UAV was verified through aerial photography and analysis, and the effect of 3D mapping on rural space monitoring was visually analyzed. If data acquired by low-altitude UAV are used in various forms such as GIS analysis and topographic map production it is expected to be used as basic data for rural planning to maintain and preserve the rural environment.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.3
• /
• pp.307-320
• /
• 2013

This paper proposes a new hybrid support structure by the driven piles which removes disadvantages of the existing type of support structure for offshore wind turbines. The hybrid type of support structure is combined with concrete cone and steel shaft, and is supported not only by gravity type foundations but also by driven piles. For three dimensional analysis of the huge and thick concrete structure, a solid-shell element that is capable of exact modeling and node interpolations of stresses is developed. By applying wave theory of stream function and solid-shell element in XSEA simulation software for fixed offshore wind turbines, a quasi-static analysis and natural frequency analysis of proposed support structure are performed with the environmental condition on Southwest Coast in Korea. In the result, lateral displacement is not exceed allowable displacement and a superiority of dynamic behavior of new hybrid support structure is validated by natural frequency analysis. Consequently, the hybrid support structure presented in this study has a structural stability enough to be applied on real-site condition in Korea. The optimized structures based on the preliminary design concept resulted in an efficient structure, which reasonably reduces fabrication costs.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.4
• /
• pp.110-122
• /
• 2014

As multimedia technologies develop, three-dimensional (3D) technologies are attracting increasing attention from researchers. In particular, video quality assessment (VQA) has become a critical issue in stereoscopic image/video processing applications. Furthermore, a human visual system (HVS) could play an important role in the measurement of stereoscopic video quality, yet existing VQA methods have done little to develop a HVS for stereoscopic video. We seek to amend this by proposing a 3D visual attention (3DVA) model which simulates the HVS for stereoscopic video by combining multiple perceptual stimuli such as depth, motion, color, intensity, and orientation contrast. We utilize this 3DVA model for pooling on significant regions of very poor video quality, and we propose no-reference (NR) stereoscopic VQA (SVQA) method. We validated the proposed SVQA method using subjective test scores from our results and those reported by others. Our approach yields high correlation with the measured mean opinion score (MOS) as well as consistent performance in asymmetric coding conditions. Additionally, the 3DVA model is used to extract information for the region-of-interest (ROI). Subjective evaluations of the extracted ROI indicate that the 3DVA-based ROI extraction outperforms the other compared extraction methods using spatial or/and temporal terms.

• Clinics in Shoulder and Elbow
• /
• v.13 no.1
• /
• pp.40-46
• /
• 2010

Purpose: The aim of this study was to evaluate the usefulness of arthroscopic Bony Bankart repair using a One Anchor Double Fixation Technique. Materials and Method: Seventeen patients with a Bony Bankart lesion were treated using the One Anchor Double Fixation Technique (OADF Technique). There were 13 males and 4 females. The average age was 24 years (range 17-42). The average follow-up period was 22.3 months. One 3.0 mm suture anchor with doubly loaded sutures was inserted into the glenoid rim. One suture strand was passed the around the small bony fragment and tied first. Another suture strand was passed through the capsule and tied over the bony fragment. The result was measured using Rowe's evaluation index & KSS score. The glenoid defect & bony fragment were measured by 3D-CT scan. Results: Rowe's evaluation index on the final follow-up showed an overall improvement from an average of 54 (range, 23-71) to 83.4 (range 71-90). Of the 17 cases, 13 were excellent, 3 were good, and 1 was fair. KSS scores showed improvement from an average of 71 (range 49-82) to 92.5 (range 82-94). There were no cases where pain continued to the final follow-up, and no cases being re-dislocated during the follow-up period. For six cases, we confirmed the bony healing of the bony Bankart lesion by CT. Conclusion: Bony Bankart lesion repair using this new method achieves excellent clinical results with low recurrence rates and is considered another choice for bony Bankart lesions.

• Journal of Veterinary Clinics
• /
• v.11 no.1
• /
• pp.485-505
• /
• 1994

Lead toxicity was evaluated in forty-five cats on a balanced diet, treated with 0(control), 10, 100(low), 1, 000, 2, 000 and 4, 000(high)ppm of lead acetate orally on a body weight basis. The objectives were to describe the gross and histopathologic changes and to demonstrate what tissue lead concentrations correlate with the known dosages of lead. In subclinical lead toxicity, greater than 80% of the absorbed lead was deposited in the bone, whereas in more acute lead toxicity, 42% of absorbed lead was deposited in the bone and 36% and 20% of absorbed lead was deposited in the kidneys and in the liver, respectively. No gross lesions were found in the nervous system. Yellow-brown colored livers appear to be associated with lead toxicity. Neuronal necrosis in the cerebrum was the most predominant histopathologic finding. Astrocytic proliferation in the cerebral gray matter was observed in 1 high dose cat. Gliosis was noted in the cerebral cortex of 6 high dose cats. Two high dose cats had demyelination in the deepest layer of the cortical gray matter of the cerebrum. Extravasation of red cells and cavitation around the vessels were found in the cerebrum of 1 high dose cat. Six high dose cats had degeneration of Purkinje cells in the cerebellum. The microscopic findings in the peripheral nerves were ambiguous. In more acute toxicity, the cats had lead inclusions in the epithelial cells of proximal tubules of the kidneys of 7 cats and hepatocytes of the liver of S cats. These inclusions could be seen wlth H&E, but were more prominent with orcein staining. Two high dose cats had granulomas and connective tissue hyperplasia between tubules of the kidneys. Periportal hepatocyte vacuolization was observed in the liver of 22 cats. Vacuolization of seminiferous tubules and a reduced number of spermatogonia(indicative of reduced spermatogenesis) were found in the testis of 5 treated cats. Cystic ovaries were observed in 3 high dose cats and poor development of oogonia was found in 2 cats. The diagnosis of lead toxicity in cats can be suspected on the basis of the histopathologic lesions described, and can be of value in contributing to a diagnosis. A reliable diagnosis of lead poisoning can be helped utilizing tissue lead analysis(post molten)

• Science of Emotion and Sensibility
• /
• v.20 no.2
• /
• pp.87-102
• /
• 2017

With increasing interest in 3D printing, the interest in the 3D modelling training that should precede the 3D printing is increasing. However, the existing 3D modelling software is developed mostly by foreign brands. Thus, the interfaces are all in English. 3D modelling software training for Korean novices who are not familiar with these terms has constraints. This study aims to explore what to consider when developing a Korean model for 3D modelling educational software for 3D printing in the face of such reality. For this goal, after having novices with no experience in 3D modeling to perform a house building task using either 12D Design or Tinker CAD, we conducted a survey. It was found in the result that more users favored Tinker CAD over 123D Design, and the errors involved while working with the Tinker CAD were less than those with the 123D Design, and the ratio of people who completed the task with the Tinker CAD was higher than that with the 123D Design. In general discussion, an introductory level educational 3D modeling software development is proposed which utilize characteristics of Tinker CAD (easy modelling is possible by three-dimensional figures) and web-based method. Also, a beginner/intermediate level educational 3D modeling software development is proposed which utilize characteristics of 123D Design (with finer measurement manipulations and figure alignment) and Windows-based method.