• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.487-494
• /
• 2020

The distance between the source and the detector, the diameter of the detector, and the volume effect of the radiation source result in a change in solid angle at the detector entrance, which affects the determination of detection efficiency by causing a difference in path length within the detector. A typical analysis method for calculating solid angles was useful only for a source (⁶⁰Co) with a simple geometric structure, so in this experiment, the distance between the detector and the source was measured by switching on for up to 25 cm with the reference point of window cap 0.5 cm. In addition, 450 and 1000 ㎖ Marinelli beaker of standard volumetric sources were closely adhered to the detector. For circular point sources co-axial with the detector, the change in the solid angle to the distance from the detector window is equal to half the square radius of the source versus the square radius of the detector, if the resulting relationship of the calculation analysis results in the detector being less than the radius of the source. Since the solid angular difference is 0.5 the result of Monte Carlo is acceptable. The relationship between detector and source distance is shown. Solid angles have been verified to decrease rapidly with distance. Measurement and simulation results for a volumetric source show a difference of ±1.01% from a distance of 0 cm and less than 4 % when the distance is reduced to 5 and 10 cm. It can be seen that the longer distance, the smaller efficiency angle, and the exponential increase in attenuation as the energy decreases, is reflected in the calculation of efficiency. Thus, the detection efficiency has proved sufficient for the use of solid angle and Monte Carlo codes.

• Proceedings of the Optical Society of Korea Conference
• /
• 2004.07a
• /
• pp.148-149
• /
• 2004

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.11a
• /
• pp.50-50
• /
• 2011

국내 섬유산업은 해외로부터의 저가 섬유제품이 대량으로 유입되는 속에서도 수출의 상당한 부분을 차지하며, 꾸준히 양에서 질로의 전환을 도모해 왔으며, 특히 최근에는 섬유 전반에 걸쳐 고부가 가치화를 지향하고 있다. 이러한 소비자의 요구에 부응하여 섬유소재에도 다양한 신개념과 이를 충족시킬 수 있는 기술이 요구되고 있으며, 그 가운데 하나의 영역을 구축해 나가고 있는 분야가 면 리플가공과 같은 표면 형태 가공이며, 최근 들어 폴리에스테르 입체(3D)가공제의 개발 및 가공 방법도 이런 흐름에 부응하여 업계에서 절실한 개발을 요구하고 있는 분야이다. 기존의 폴리에스테르 및 합성섬유의 입체 가공에 적용된 화학제품보다 성능은 우수하면서, 가공 공정이나 완성된 섬유제품에 전혀 잔존하지 않아 인체친화적(기존의 제품들은 인체에 유해한 재료이면서 가공 후 잔존함)이며, 환경적인 측면에서도 친환경을 유지하면서 새로운 폴리에스테르섬유, 좀 더 폭넓게는 열가소성인 모든 합성섬유의 입체가공이 가능한 약품의 개발 및 이를 이용한 가공방법의 개발은 매우 중요한 의의를 가지게 된다. 본 연구에서는 폴리에스테르의 3D입체 디보싱을 부여하는 합성바인더가 물에 의한 용해도를 확인하기 위하여 용액의 PH에 따른 용해성 시험을 진행하였으며, 합성한 발포제의 양에 따른 3D입체형성 정도를 이미지로 형상화 하였다.

• Radiation Oncology Journal
• /
• v.20 no.2
• /
• pp.123-129
• /
• 2002

Purpose : The purpose of this study 띤as to determine the potential role of three-dimensional conformal radiotherapy (3D-CRT) in the treatment of primary unresectable hepatocellular carcinoma. The preliminary results on the efficacy and the toxicity of 3D-CRT are reported. Materials and Methods : Seventeen patients were enrolled in this study, which was conducted prospectively from January 1995 to June 1997. The exclusion criteria included the presence of extrahepatic metastasis, liver cirrhosis of Child-Pugh classification C, tumors occupying more than two thirds of the entire liver, and a performance status of more than 3 on the ECOG scale. Two patients were treated with radiotherapy only while the remaining 15 were treated with combined transcatheter arterial chemoembolization. Radiotherapy was given to the field including the tumor plus a 1.5 cm margin using a 3D-CRT technique. The radiation dose ranged from $36\~60\;Gy$ (median; 59.4 Gy). Tumor response was based on a radiological examination such as the CT scan, MR imaging, and hepatic artery angiography at $4\~8$ weeks following the completion of treatment. The acute and subacute toxicities were monitored. Results : An objective response was observed in 11 out of 17 patients, giving a response rate of $64.7\%$. The actuarial survival rate at 2 years was $21.2\%$ from the start of radiotherapy (median survival; 19 months). Six patients developed a distant metastasis consisting of a lung metastasis in 5 patients and bone metastasis in one. The complications related to 30-CRT were gastro-duodenitis $(\geq\;grade\;2)$ in 2 patients. There were no treatment related deaths and radiation induced hepatitis. Conclusion : The preliminary results show that 3D-CRT is a reliable and effective treatment modality for primary unresectable hepatocellular carcinoma compared to other conventional modalities. Further studies to evaluate the definitive role of the 3D-CRT technique in the treatment of primary unresectable hepatocellular carcinoma are needed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.305-307
• /
• 2011

최근 3D 입체 영화 및 3D 방송 기술의 개발과 더불어, 사용자의 몰입감을 극대화하기 위하여, 3D 입체영상과 사용자의 인터랙션 효과를 융합하는 3D Interaction 기술이 개발되고 있다. 본 논문에서는 3D 디스플레이에서의 시각안전영역을 고려한 3D 사용자 인터페이스의 구현 방법에 대해서 소개한다. 사용자의 입력에 따라 객체의 변이 정보를 계산하고, 변이 정보가 사람의 시각안정영역 내에서 존재하도록 적응적으로 깊이를 조절하여, 사용자의 시각적 편안함과 3D 객체에 대한 조절 기능을 제공할 수 있다. 무안경 3D 디스플레이 상에서의 구현 결과를 통해 제안하는 기술의 효율성을 보여준다.

• Electronics and Telecommunications Trends
• /
• v.26 no.2
• /
• pp.126-136
• /
• 2011

최근 문화기술(CT) 기반으로 다양한 산업의 콘텐츠화가 급속히 진행되고 있는 가운데, 융합형 콘텐츠가 새로운 성장동력으로서 주목받고 있다. 또한 상상력과 창의력 기반의 문화적 요소가 가미된 융합형 콘텐츠 산업은 '경쟁없는 시장'으로서 국가 비즈니스 혁신의 돌파구가 될 것으로 전망되고 있다. 이런 상황에서 차세대 융합형 콘텐츠 분야의 유망 전략 산업에 대한 산업-기술 연계 로드맵 작성 및 기술기획 프레임워크(framework) 구축은 미래 기술기획 및 기술개발, 관련 산업의 활성화, R&D 투자 배분 등을 위한 사전 작업 및 방향지표로서의 의의를 가진다. 이에 본 고에서는 유망 융합형 콘텐츠 분야에 대한 산업-기술 연계 로드맵을 3가지 기술발전 경로, 즉 단위 소요기술의 향상(upgrade road), 기존 소요기술의 진화(evolution road), 단위 소요기술의 혁신(innovation road)을 반영하여 작성하는 입체로드맵으로 기술기획 프레임워크 내에서 제시 적용하도록 한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1689-1691
• /
• 2015

인체 장기의 내부 구조를 학습하기 위해 많은 3 차원 인체영상관련 콘텐츠들이 소개되어 왔다. 하지만, 이러한 학습 콘텐츠들은 사실적인 색상을 표현하기 어려울 뿐만 아니라 사용자가 조작할 때 현실감이 떨어지기 때문에 해부도감과 같은 2 차원 학습 콘텐츠와 차별성이 적다. 본 논문에서는 사실적인 인체 색 정보를 가지고 있는 컬러 인체 데이터와 사용자의 동작을 인식하는 센서를 활용하여 몰입감 높은 체험형 가상 내시경 모의 훈련 시스템을 제안한다. 컬러 인체 데이터를 양안시 볼륨렌더링 하여 입체감을 높이고 동작인식 센서를 이용하여 사용자의 손동작으로 직접 가상 내시경 카메라를 조작하여 항행하도록 하였다. 제안한 시스템을 이용하여 다양한 인체 장기의 내부 구조를 사실적으로 표현할 수 있으며 이를 통해 의학정보 학습에 도움을 줄 수 있다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.275-284
• /
• 2017

As the 3D Greenery system is known to improve the urban environment, it works as new alternative for eco-friendly building and warrants further study for application to the domestic field. This study aimed to apply the design components for eco-friendly composition by investigating the spatial characteristics of the 3D Greenery System reflected in interior and exterior of buildings and to analyze the organization and design elements of domestic and foreign cases. The results showed that instances of the Greenery System tended to be a large scale and high-density development in order to expand various exterior spaces. Although its early forms were often found in such public facilities as exhibition and education purpose, cases of multi-unit dwelling have been growing. Allowing apartment residents to prefer intimate space by providing various such spaces for residential units and offering independent green spaces would induce diverse residents' lifestyles rather than monotonous design. The analysis also indicated that community space composed of various outdoor spaces and atmosphere would change life patterns of multi-housing and establish a real neighborhood through social interaction. Moreover, further investigation of the design patterns of outdoor space arrangement is needed since the Greenery system actively reflects the environmental characteristics of building sites and clearly shows a tendency to utilize natural terrain and slope in building shapes.

• Investigative Magnetic Resonance Imaging
• /
• v.16 no.1
• /
• pp.67-75
• /
• 2012

Purpose : We studied enhanced method to view the vessels in the brain using Magnetic Resonance Angiography (MRA). Noticing that Maximum Intensity Projection (MIP) image is often used to evaluate the arteries of the neck and brain, we propose a new method for view brain vessels to stereo image in 3D space with more superior and more correct compared with conventional method. Materials and Methods: We use 3T Siemens Tim Trio MRI scanner with 4 channel head coil and get a 3D MRA brain data by fixing volunteers head and radiating Phase Contrast pulse sequence. MRA brain data is 3D rotated according to the view angle of each eyes. Optimal view angle (projection angle) is determined by the distance between eye and center of the data. Newly acquired MRA data are projected along with the projection line and display only the highest values. Each left and right view MIP image is integrated through anaglyph imaging method and optimal stereoscopic MIP image is acquired. Results: Result image shows that proposed method let enable to view MIP image at any direction of MRA data that is impossible to the conventional method. Moreover, considering disparity and distance from viewer to center of MRA data at spherical coordinates, we can get more realistic stereo image. In conclusion, we can get optimal stereoscopic images according to the position that viewers want to see and distance between viewer and MRA data. Conclusion: Proposed method overcome problems of conventional method that shows only specific projected image (z-axis projection) and give optimal depth information by converting mono MIP image to stereoscopic image considering viewers position. And can display any view of MRA data at spherical coordinates. If the optimization algorithm and parallel processing is applied, it may give useful medical information for diagnosis and treatment planning in real-time.

• Journal of the Korean Chemical Society
• /
• v.39 no.2
• /
• pp.123-126
• /
• 1995