• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 1998.06a
• /
• pp.69-73
• /
• 1998

경기도 퇴촌에 위치한 경희대학교 연습림내의 경사도와 수종을 달리하는 3개의 서로 다른 임반에서 등고선을 따라 지표면의 토층분화를 조사하였고 이에 따른 수분침투특성을 조사하였다. 3개의 임반은 낙엽송, 잣나무 및 굴참나무의 천연활엽수로 구성되었고 이에 구성 수종에 따라 지표면에 퇴적되는 O, A, B층의 깊이를 달리한다. 토층분화 길이는 3개 임반 모두 경사도가 낮은 하부사면에서 양호하게 발달하였으며 경사도가 높은 산사면이나 수간우가 많은 일부 지역에서는 유거수에 의해 유기물이나 표층토가 유실되어 바로 암반층 또는 풍화층이 나타나는 경향을 보이고 있다. 그러나 잣나무 임반의 경우 밀식 수간에 의해 유기물퇴적층과 A층의 발달이 다른 낙엽송이나 굴참나무 임반보다 토층 발달 깊이가 약 2배 이상으로 깊게 발달되었다. 그리고 조사된 임반의 하부사면의 경우 A층의 발달이 약 35cm부터 약 60cm에 이르고 있으나 토성을 구성하는 요소 중 직경 2mm 이상의 자갈에 토양입자들이 전체 토양의 40%정도를 차지하고 있다. 이러한 토층분화 특성을 달리하는 임반에서의 수분 이동특성은 퇴적된 유기물의 두께가 깊으면 깊을수록 수분침투율은 낮아지는 반면 포면 유거수량은 증가하는 경향을 보여주고 있다. 그리고 지표면, 유기물 퇴적층 아래, 지표면으로부터 30cm 아래에 설치된 Lysimeter를 이용하여 조사된 침출수의 분포는 전체를 100으로 환산시 지표면은 약 55%, 유기물퇴적층 아래는 30%, 그라고 30cm의 위치에서는 나머지 15%정도의 침출수가 포집되었다. 따라서 본 실험의 결과를 살펴보았을 때 지표 층에 존재하는 유기물이 전체 수분이동에 영향을 미치는 것으로 조사되었다.양 실험 결과, 서식지에서 조사된 결과인 잎과 줄기에서 Pb$\alpha$ 추정시에는 SeaWiFS 위성과 관련된 global algorithms 중에서 490nm와 555nm의 복합밴드를 포함하는 OC2 알고리즘(ocean color chlorophyll 2 algorithm)을 사용하는 것이 OC2 series 및 OC4 알고리즘보다 좋은 추정 값을 도출할 수 있을 것으로 기대된다.환경에서는 5일에서 7월에 주로 이 충체의 유충이 발육되고 전파되는 것으로 추측되었다.러 가지 방법들을 적극 적용하여 금후 검토해볼 필요가 있을 것이다.잡은 전혀 삭과가 형성되지 않았다. 이 결과는 종간 교잡종을 자방친으로 하고 그 자방친의 화분친을 사용할 때만 교잡이 이루어지고 있음을 나타내고 있다. 따라서 여교잡을 통한 종간잡종 품종육성 활용방안을 금후 적극 확대 검토해야 할 것이다하였다.함을 보이고 있다.X> , ZnCl$_{3}$$^{-}$같은

• Journal of Digital Convergence
• /
• v.17 no.10
• /
• pp.373-379
• /
• 2019

Polymethyl methacrylate (PMMA), a self-polymerizing resin for removable orthodontic devices, has been used as a dental orthodontic device for many years because of its advantages such as color stability, volume stability, and tissue compatibility. However, such a removable orthodontic device has a disadvantage that the longer the use in the oral cavity due to the low strength of the PMMA fracture of the orthodontic device resin in use. In this study, zinc nanoparticles (ZNP) were mixed with orthodontic PMMA to introduce strength effect. Rectangular samples ($1.4{\times}3.0{\times}19.0mm$) of orthodontic PMMA (0, 0.5, 1.0, 2.0 and 4.0%) containing ZNP were prepared. The finished specimen was tested for three-point bending strength at a speed of 1 mm / min, and the Vickers hardness was measured three times using a hardness tester. The surface roughness was measured with a surface roughness. As a result, the 3-point bending strength did not change significantly (p>0.05). Surface energy increased significantly. As a result, we successfully synthesized ZNP in this study and prepared the dispersed resin specimen for calibration. It will be possible to develop high-density dental orthodontic resins.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.144-152
• /
• 2004

The aim of this study was to evaluate the resistance to degradation of three commercial compomers in an alkaline solution. Dyract(Dentsply), Elan(Kerr) and F-2000(3M) polyacid modified resin composites(compomers) were used in this study. The resistance to degradation was evaluated on the basis of mass loss(%), degradation $depth({\mu}m)$ and Si, Al, Ba loss(ppm). The results were as follows : 1. The mass loss of each brand was $1.42%{\sim}2.14%$ and there was no statistically significant difference of mass loss among Dyract, F2000 and Elan. 2. The degradation layer depth of each brand was $182.92{\sim}227.7{\mu}m$ and there was no statistically significant difference of degradation layer depth among Dyract, F2000 and Elan. 3. There was statistically significant differences in Si-loss and Al-loss among three compomers (p<0.05). Si loss was the highest value in Dyract and Al loss was the highest value in F2000. 4. There was statistically significant correlation between mass loss and degradation layer depth (r=0.60, p<0.05). 5. In SEM finding, there was some destruction of compomer matrix-filler interface in post-exposure specimen to NaOH solution. As the matrix decreased, the filler particles distinguished and the periphery of the filler particles appeared whitish color due to degradation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.295-300
• /
• 2015

Purpose: The aim of this study was to evaluate the shear bond strength between Ni-Cr alloy and composite resin using universal adhesive systems coMPared to conventional method using metal primers. Materials and methods: For this study, a total of 120 cast commercial Ni-Cr alloy (Vera Bond 2V) disks were embedded in acrylic resin, and their surfaces were smoothed with silicon carbide papers and airborne-particle abrasion. Specimens of each metal were divided into 6 groups based on the combination of metal primers (Metal primer II, Alloy primer, Metal & Zirconia primer, MKZ primer) and universal adhesive systems (Single Bond Universal, All Bond Universal). All specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Shear bond strength testing was performed with a universal testing machine at a cross head speed of 1 m/min. Data (MPa) were analyzed using one-way ANOVA and the post hoc Tukey's multiple comparison test (${\alpha}$=.05). Results: There were significant differences between Single Bond Universal, All Bond Universal, Metal Primer II and Alloy Primer, MKZ Primer, Metal & Zirconia Primer (P<.001). Conclusion: Universal Adhesive system groups indicated high shear bond strength value bonded to Ni-Cr alloy than that of conventional system groups using primers except Metal Primer II. Within the limitations of this study, improvement of universal adhesive systems which can be applied to all types of restorations is recommended especially non-precious metal alloy. More research is needed to evaluate the effect of silane inclusion or exclusion in universal adhesive systems.