• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.1
• /
• pp.7-13
• /
• 2011

The behavior prediction of PAHs in Jinhae Bay using a three-dimensional ecological model(EMT-3D) was examined. A three-dimensional ecological model(EMT-3D) was applied to the simulation of PAHs behaviors in Jinhae Bay of Korea. The computed results of simulation were in good agreement with the observed values. The result of sensitivity analysis showed that photolysis coefficient and extinction coefficient were important factors in the variation of dissolved PAHs, and POC partition coefficient was important factor in the variation of PAHs in particulate organic matter. In the case of PAHs in phytoplankton, bioconcentration factor of plankton was the most significant and the most effective in all. In simulations of 30%, 50% and 80% reduction in total loads of PAHs, the concentrations of dissolved PAHs were shown to be lower than 24 ng/L, 20 ng/L and 16 ng/L, respectively.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.6
• /
• pp.1613-1620
• /
• 1990

For the purpose of the study on the spray characteristics of a coaxial nozzle, the measurement of the velocity and size of droplets, concentration, and the statistical correlation coefficient between the fluctuation of the velocity and that of the corresponding drop diameter have been carried out. Various method of simultaneous measurement of velocity and drop size have been developed from LDV techniques. The technique used here belongs to the method that supposed by Yule, Holve and Self. It has the advantages of making use of a standard LDV apparatus to which minor modifications have been brought, photomultiplier is equipped with a slit instead of a pinhole and observed the measuring volume at an angle of 90.deg.. The voltage supplied by the photomultiplier has undergone an appropriate analog and digital processing. The experimental results give a good idea of the two phase flow organization and can be helpful to find a drop diffusion model when suitable data are imput.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.1
• /
• pp.21-27
• /
• 2008

Triangular structure is used as basic shape of artificial structures for generating the upwelling current in order to make rich fishing ground at sea. Artificial upwelling current could bring the deep sea water containing a lot of nutrients from the bottom up to the surface. The purpose of this study is to examine the flow characteristics around underwater triangular structure with various stratification parameter. An experimental study was carried out for the triangular structure model in the circulating water channel to investigate flow characteristics by flow visualization method. A velocity fields around the underwater structure were measured by particle image velocimetry(PIV). The experimental results showed that the upwelling effect at the back and upper region of the structure could be best when the water depth was 2 times of the structure height and the stratification parameter was approximately 3.0. These quantitative data will be useful to determine the functional efficiency cf artificial upwelling structures.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.487-493
• /
• 2016

The moment analysis of lysozyme was implemented using chromatograms that were obtained from weak cation exchange column in high performance liquid chromatography system. Three elution sodium phosphate buffers containing 1.0, 0.75, 0.5M sodium chloride were used. Experiments were conducted by varying flow rate, elution sodium chloride concentration, and lysozyme solute concentration. The general rate (GR) model was employed to calculate the first moment and the second moment. By plotting $L/u_0$ vs. $({\mu}_1-t_0)/(1-{\varepsilon}_e)(1-{\varepsilon}_i)$] equilibrium constants (K) were obtained from first moment analysis. Intra-particle diffusivity was obtained from theoretical plate number data. Based on the results of moment analysis, van Deemter plots were drawn in order to investigate the contributions of $H_{ax}$, $H_f$, and $H_d$ to total Height Equivalent to a Theoretical Plate (HETP, $H_{total}$). The effect of intra-particle diffusion ($H_d$) was the most dominant factor contributing to HETP while external mass transfer ($H_f$) was negligible factor.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.171-172
• /
• 2005

PSNZT계 압전 세라믹스는 압전 특성을 개량하고, 여러 가지 응용 분야의 요구를 만족할 특성을 얻기 위해 Mn을 포함하는 첨가물에 관한 연구를 하였다. Mn을 포함하는 산화물은 기계적 품질계수($Q_m$)를 높이는 강화제로 널리 활용되고 있으며, $Mn^{4+}$를 갖는 $MnO_2$가 가장 많이 사용되고 있다. 산화물에서 Mn 전자가는 여러 상태 인데, 이런 전자가의 변화가 압전 특성에 미치는 영향을 조사하였다. Mn 전자가에 따라서 소결체의 미세구조는 $MnCO_3$와 $Mn_3O_4$경우 입자크기가 10${\mu}m$정도였으며, $Mn_2O_3$와 $MnO_2$의 입자크기는 $1\sim5{\mu}m$정도로 불규칙하였다. 전반적으로 소결체는 밀도가 $7.75g/cm^2$이상이었고, 치밀하였다. $MnCO_3$경우 전기기계 결합계수는 56%이고, $MnO_2$경우 기계적 품질계수는 2000이상이었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.30 no.7
• /
• pp.90-97
• /
• 2002

Wall slip models are essential to the study of nonequilibrium gas transport in rarefied and microscale condition that can be found in gas flows associated with aerospace vehicle, propulsion system, and MEMS. The Maxwell slip model has been used for this type of problem, but it has difficulty in defining the so-called accommodation coefficient and has not been very effective in numerical implementation. In the present study, on the basis of Langmuir's theory of the adsorption of gases on metals, a physical slip model is developed. The concept of the accommodation coefficient and the difference of gas particles are clearly explained in the new model. It turned out that the Langmuir model recovers the Maxwell model in the first-order approximation. The new models are also applied to various situations including internal flow in a microchannel. Issues of validation of models are treated by comparing analytic results with experiment.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.136-136
• /
• 2010

해색원격탐사에서 해수 type을 광학적 성질에 따라 Case-I water와 Case-II water로 구분한다. Case-I water는 기본적으로 조류 세포 및 그 쇄설물 그리고 미량의 용존 유기물을 포함하며, 맑은 해수인 대양이 이에 속한다. Case-II water는 부유 무기입자, 육상 기원입자 및 높은 용존 유기물 농도, 인간이 만든 유입물을 포함한 탁한 해수이며, 연안 해역의 해수가 이에 속한다(Gordon, 1983). Case-II water에 속하는 연안 해역의 부유사 농도는 해양 연안 환경 변화를 모니터링 할 수 있는 중요한 지표 중 하나이다. 부유사가 연안 환경, 연안 양식장, 어장 환경에 어떤 영향을 주는지 파악할 수 있다. 채수를 통하여 부유사 농도를 추정하는 것은 시간적 경제적 제약이 따른다. 하지만 위성자료와 실측 자료간의 상관관계가 잘 나타나는 계수를 유도하면, 실측없이 위성영상만 있으면 연속적인 부유사 농도 분포를 볼 수 있을 것으로 기대된다. 이런 목적으로 Landsat ETM+ 자료를 이용하여 광양만의 표층 부유사 농도를 추정하였다. 위성 통과시간에 맞춰 2009년 9월 22일과 11월 25일 2차례에 걸쳐 부유사 농도와 반사도를 광양만 16개 정점에서 측정하였다. 부유사 농도는 표층의 해수를 채수하여 GF/F 필터를 이용해 측정되었고, 반사도는 Spectroradiometer를 사용하여 350nm부터 1050nm까지 1nm 간격으로 측정되었다. Landsat ETM+ 자료와 실측 반사도는 원격반사도 $R_{rs}$로 변환되었고, 두 가지 $R_{rs}$를 실측 부유사 농도와 비교하여 부유사 농도 산출 계수를 유도하였다. 경험적으로 구한 계수를 사용하여 위성영상을 부유사 농도로 계산하였으며, 이는 같은 날의 실측 부유사 농도와 비슷한 공간분포를 나타내었다.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.7
• /
• pp.47-55
• /
• 2013

In the element test for coarse granular materials, the grain size distributions of the materials are often adjusted, in case the grain size of coarse material in the field is larger than the available maximum grain size of the laboratory test equipment. In this study, we carried out the large cyclic triaxial test to evaluate the effect of the grain size distribution adjustment on Young's modulus in small to intermediate strain level. The test results showed that the coarse granular materials with the adjusted grain size distribution underestimated Young's modulus of the original materials. The difference of Young's modulus was larger in small strain level than in intermediate strain level.

• Resources Recycling
• /
• v.12 no.2
• /
• pp.11-20
• /
• 2003

Limestone mine waste was used as a aggregate far permeable concrete. Void ratio, continuous void ratio, coefficient of permeability, compressive strength and flexural strength of concrete were measured and then the relationship between porosity and strength properties was investigated. Void ratio, continuous void ratio and strength properties of permeable concrete were greatly influenced by the grain size of aggregate and void filling ratio in comparison with the containing ratio of limestone mine waste. Furthermore, void ratio showed a good relation with continuous void ratio, and porosity of permeable concrete indicated a good relation with strength properties also. The coefficient of permeability of permeable concrete using limestone waste was over 0.2 cm/sec and was excellent result in comparison with normal concrete. Therefore, it could be expected that the limestone mine waste would be utilized as aggregate for pavement concrete, green concrete and water resource specie concrete in the results of this study.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.2 no.2
• /
• pp.14-23
• /
• 1998

The present study investigates numerically particle laden flow through compressor cascade. In general, a lot of turbine engines are affected by various particles which are suspending in the atmosphere. Especially in the case of aircraft aviating in volcanic, industrial and desert region including many particles, each components of engine system are damaged severely. That damage modes are erosion of compressor binding and rotor path components, partial or total blockage of cooling passage and engine control system degradation.. Initial damages can not be serious but cumulation of damages influences on safety of aircraft control and economical maintenance cost of engine system can be increased. When dust, materials and volcanic particles in the atmosphere flow in the compressor, it is necessary to predict damaged and deposited region of compressor blades. To the various flow inlet angle, predictions of particles trajectory in compressor cascade by Lagrangian method are presented and impulses by impaction of particles at blade surface are calculated. By the definition of particle deposition efficiency, characteristics of particles impact are considered quantitatively. With these prediction and experimental data, erosion rates are predicted for two materials - ceramic, soft metal - on compressor blade surface. Improvements like coating of blade surface could be found, by above prediction.