• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.129-136
• /
• 2006

Engineered mixtures, which consist of rigid sand particles and soft fine-grained rubber particles, are tested to characterize their small and large-strain responses. Engineered soils are prepared with different volumetric sand fraction, sf, to identify the transition from a rigid to a soft granular skeleton using wave propagation, $K_{o}-loading$, and triaxial testing. Deformation moduli at small, middle and large-strain do not change linearly with the volume fraction of rigid particles; instead, deformation moduli increase dramatically when the sand fraction exceeds a threshold value between sf=0.6 to 0.8 that marks the formation of a percolating network of stiff particles. The friction angle increases with the volume fraction of rigid particles. Conversely, the axial strain at peak strength increases with the content of soft particles, and no apparent peak strength is observed in specimens when sand fraction is less than 60%. The presence of soft particles alters the formation of force chains. While soft particles are not part of high-load carrying chains, they play the important role of preventing the buckling of stiff particle chains.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 1999.10a
• /
• pp.194-196
• /
• 1999

대기나 수용액 속에 부유 입자는 서로 충돌하여 합쳐져서 그 크기가 커지게 된다. 이러한 과정을 응집(Coagulation)이라고 하며, 이는 대기중 부유입자의 농도 및 크기분포의 변화, 구름 속에서의 빗방울형성 등에 매우 중요한 기작 중의 하나이다. 응집방정식은 일반적으로 비선형 편미적분 방정식으로 표현되어 일반 해를 구하는 것은 불가능하다. 이러한 이유로 응집방정식을 풀 때에는 수치 해석적인 방법이 주로 이용되고 있다.(Tolof, 1977; Gelbard and Seinfeld, 1978; Reed ea al., 1980; Mick et al., 1991).(중략)

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.520-520
• /
• 2012

플라즈마 방전의 공간 평균 모사는 플라즈마 변수에 대한 정확한 값을 주지는 않지만 방전외부 조건에 따른 플라즈마 변수 변화를 통해 플라즈마 특성을 예측하는데 많은 도움을 준다. 본 연구에서는 준안정준위를 포함한 다단계 이온화 반응을 고려하여 헬륨 플라즈마의 공간 평균 모사를 진행하였다. 플라즈마에 흡수된 전력, 압력에 따른 각 입자의 생성, 소멸에 대한 입자 보존식과 전자에 대한 에너지 보존식을 통하여 플라즈마 변수를 얻었으며, 반응식을 세우기 위하여 헬륨 원자 에너지 준위 내의 특정 준위를 택하여 준위 간의 전이 반응 계수를 계산하였고 실험값과 비교하였다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1999.11a
• /
• pp.57-60
• /
• 1999

순환유동층 보일러는 연소로 (상승관: riser)내에 공기를 고속으로 주입하여 비말동반되는 고체입자를 사이클론에서 포집 하여 재주입하는 유동층을 이르는 것으로, 난류유동층(turbulent fluidized bed), 고속유동층(fast fluidized bed) 그리고 희박상 유동(dilute phase flow) 영역에서 조업이 이루어진다. 순환유동층은 비교적 높은 기체 유속에서 조업이 이루어지기 때문에 고체입자의 혼합 및 비산 그리고 재순환이 격렬하게 이루어지고, 기-고체간 접촉효율 및 전열계수가 높아 전체적인 처리량 및 효율이 좋은 장점을 가지고 있다.(중략)

• Progress in Medical Physics
• /
• v.1 no.1
• /
• pp.97-107
• /
• 1990

A method of detecting charged particles in an allyl diglycol carbonate material (PN-3) which is available, amorphous, optically clear and thermoset plastic in which nuclear particle tracks could be revealed by etching in hot NaOH solutions, has been investigated. It has been applied to the study of alpha particle tracks over an energy range of 3.17～5.49 MeV which has been obtained after having passed through several sheets of polycarbonate. The dose equivalent rate of the alpha source was calculated and the spark chamber was used in order to measure the range of alpha particles after having passed through different number of absorbers. The etching characteristics and the detection response of PN-3 have been studied as a funcion of lengths of etched tracks against the parameters of energies and of the track etching rate(V$_{T}$). The investigation of the etching process for alpha particles in the PN-3 provided the most interesting results.s.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.40 no.11
• /
• pp.689-695
• /
• 2016

The performance of proton exchange membrane fuel cells (PEMFC) is strongly related to the water flow and accumulation in the gas diffusion layer (GDL) and catalyst layer. Understanding the behavior of fluid from the characteristics of the media is crucial for the improvement of the performance and design of the GDL. In this paper, a numerical method is proposed to calculate the design parameters of the GDL, i.e., permeability, tortuosity, and effective diffusivity. The fluid flow in a channel filled with randomly packed hard spheres is simulated to validate the method. The flow simulation was performed by lattice Boltzmann method with bounce back condition for the solid volume fraction in the porous media, with different values of porosities. Permeability, which affects the flow, was calculated from the average pressure drop and the velocity in the porous media. Tortuosity, calculated by the ratio the average path length of the randomly injected massless particles to the thickness of the porous media, and the resultant effective diffusivity were in good agreement with the theoretical model. The suggested method can be used to calculate the parameters of real GDL accurately without any modification.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.4
• /
• pp.48-56
• /
• 2002

It was peformed to estimate the sensitivity analyses and mass balance for tributyltin in Masan Bay, using the model builded by stella program. The results of the sensitivity analysis for dissolved tributyltin and tributyltin in the particulate organic carbon showed that not only organic carbon partition coefficient but also settling rate is important. In the case of tributyltin in phytoplankton, bioconcentration factor of phytoplankton is most important. The results of the mass balance showed that standing stocks of tributyltin in water, in phytoplankton and in particulate organic carbon are 3.29×10⁴g, 1.16×10²g and 3.17×10³g, respectively. In the case of flux, partition to particulate organic carbon showed most high value, 1.64×10³g/4ay, and next were deposition to sediment, 1.64×10³g/day and transportation to open sea by tide, 1.64×10³g/day.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.141-150
• /
• 2022

Fluid flow and thermal characteristics of laminar nanofluid(water/Al2O3) flow in a circular U-bend tube have been studied numerically. In this study, the effect of Reynolds number and the solid volume fraction and the impact of the U-bend on the flow field, the heat transfer and pressure drop was investigated. Comparisons with previously published experimental works on horizontal curved tubes show good agreements between the results. Heat transfer coefficient increases by increasing the solid volume fraction of nanoparticles as well as Reynolds number. Also, the presence of the secondary flow in the curve plays a key role in increasing the average heat transfer coefficient. However, the pressure drop curve increases significantly in the tubes with the increase in nanoparticles volume fraction.

• Korean Chemical Engineering Research
• /
• v.47 no.4
• /
• pp.459-464
• /
• 2009

Gas-liquid mass transfer characteristics were investigated in pressurized three-phase slurry bubble columns with variation of column diameter. Effects of gas velocity, operating pressure, liquid viscosity, solid content in the slurry phase and column diameter on the gas-liquid volumetric mass transfer coefficient($k_La$) were determined. The effects of operating variables on the mass transfer coefficient tended to change with variation of column diameter. The mass transfer coefficient increased with increasing gas velocity or operating pressure but decreased with increasing column diameter, liquid viscosity or solid concentration in the slurry phase. The increase trend of $k_La$ value with increasing gas velocity and the decrease trend of $k_La$ value with increasing liquid viscosity, tended to decrease gradually with increasing column diameter. However, the effects of operating pressure and solid concentration in the slurry phase on the $k_La$ value did not change considerably with variation of column diameter. The values of $k_La$ were well correlated with operating variables with in this experimental conditions as $k_La=0.02D^{-0.26}U_G^{0.28}P^{0.43}{\mu}_L^{-0.04}S_c^{-0.35}$.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.2
• /
• pp.89-96
• /
• 2011

A three dimensional ecological model(EMT-3D) was applied to Ulsan Bay for the simulation of Dioxins. The simulated results of dissolved Dioxins were in agreement with the observed values, with a correlation coefficient(R) of 0.7951 and a coefficient of determination($R^2$) of 0.6265. The results of sensitivity analysis showed that partition rate, adsorption rate and bioconcentration factor were important factors. Therefore, the parameters must be carefully considered in the modeling. In the case of 50% and 80% total loads reduction, concentration of dissolved Dioxins was shown to be lower than 0.150 and 0.250 pg WHD-TEQ/L, respectively.