• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.648-652
• /
• 2005

A super ionic conductor, $K^+$-beta-aluminas, which is known to be difficult to obtain in the form of dense sintered density under atmospheric pressure, was pulverized to 350 nm mean particle size using attrition mill. The sample were pressed into tablet form by uniaxial pressing. The specimen was sintered under atmospheric pressure in powder form. Sintering temperature range was $1400^{\circ}C$ to $1650^{\circ}C$ at $50^{\circ}C$ intervals. Additionally, zone sintering was carried out to control the growth grain at high temperature ($1600^{\circ}C$). The density of specimens that were sintered at $1600^{\circ}C$ and $1650^{\circ}C$, and sintered at $1600^{\circ}C$ by zone sintering were about 93% and 95%, respectively. In the case of the lengthened sintering time to 2 h, the density of specimen was reduced to lower than 90%, since the particles were grown to the duplex microstructure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.373-373
• /
• 2013

높은 효율의 InGaN/GaN 전광소자는 현대 조명 산업에 필수적인 역할을 하고 있다. 그러나 전광소자의 효율을 높이는 데에는 여러가지 한계들이 있다. 예를 들면 높은 전류에서의 효율저하, GaN 의 전위결함에 의한 비발광 재결합의 발생 등이 있다. 이러한 한계를 극복하고자 InGaN/GaN 전광소자의 효율을 높이기 위해 사파이어 기판의 표면을 거칠게 바꾸는 방법, 무분극 전광소자, 표면 플라즈몬 등 여러가지 많은 방법들이 개발되고 있다. c-plane InGaN/GaN LED 기반의 표면 플라즈몬 실험은 많은 연구가 수행되고 있으나, m-plane InGaN/GaN LED 기반의 표면 플라즈몬은 아직 연구가 진행되지 않았다. 본 실험의 목적은 표면 플라즈몬 효과를 이용하여 semi-polar InGaN/GaN LED의 광효율을 개선하는 것이다. 유기금속화학 증착 장비로 m-plane sapphire위에 $6{\mu}m$ 의 GaN 버퍼층을 증착하고 표면의 평탄화를 위해 $2{\mu}m$의 n-GaN을 증착하였다. 그 위에 3개의 다중양자우물 층을 증착하였고, 10 nm의 도핑이 되지않은 GaN를 증착하였다. 표면 플라즈몬 현상을 일으키기 위해 Ag박막을 10, 15, 20 nm 증착하여 급속 열처리 방법으로 $300^{\circ}C$에서 20분 열처리 하였다. 형성된 나노입자를 측정하기 위해 주사전자현미경으로 표면을 분석하였다. 표면플라즈몬에 의한 InGaN/GaN 광 세기를 측정하고자 여기 파장이 385 nm인 photoluminescence (PL) 를 사용하였다. 또한 내부양자효과의 증가를 확인하기 위해 PL을 이용하여 온도를 10~300 K까지 20 K 간격으로 광세기를 측정하였다. 향상된 내부 양자효과가 표면 플라즈몬에 의한 것임을 증명하기 위해 time-resolved PL을 이용하여 운반자 수명시간을 구하였다.

• Applied Microscopy
• /
• v.30 no.1
• /
• pp.61-72
• /
• 2000

Three fertilization envelopes (FE) have been observed after the artificial insemination of U. unicinctus oocytes. The substances of the first fertilization envelope, which is an effective barrier against excessive sperm, come mainly from the surface coat of the oocyte. The secretions of the cortical granules take part in formation of the 2nd fertilization envelope. Histologically, the 3rd fertilization envelope is not amorphous as seen under light microscope, but contains numerous panicles under electron microscope, which would be contributed to harden the envelope by 60 min after the fertilization. With the substantial similarity between the 1st fertilization envelope and the surface coat of the oocyte, and the coincidence of retraction of microvilli and the formation of the 1st fertilization envelope, it is suggested that the microvilli contain the sperm receptors in U. unicinctus. Some granular substances from the distal part of the acrosome diffuse on the surface coat of the oocyte while the acrosomal tubules penetrate into the surface coat. The acrosomal tubules arise from the proximal part of the acrosome and pass through the acrosomal lumen.

• Journal of Navigation and Port Research
• /
• v.30 no.3 s.109
• /
• pp.241-245
• /
• 2006

Displayed result that handle particle contaminant and hydrospace organism included a number of ballast that is happened in ship using automatic back washing filter. Reason that removes first contaminant that is included in number of ballast is that heighten processing effectof after processing processof the filter. Another advantage is to drop off the solids with controlling revolution of drum screen in pretreatment filtration process. The fact that it is easy to attach and detach a several type of screen for getting the expected water quality is another advantage. Filter rotation speed of filtration filter could be expose by 35mmHg more than 60 rpm and filter consecutively filtration pressure is 40.5mmHg in 20 rpm and 40 rpm are 36.6mmHg. Filtration system removal aquatic organism over $70{\mu}min$ ballast water. This study shows that the filtration treatment system has a potential for the treatment of ballast water.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.136-136
• /
• 2010

해색원격탐사에서 해수 type을 광학적 성질에 따라 Case-I water와 Case-II water로 구분한다. Case-I water는 기본적으로 조류 세포 및 그 쇄설물 그리고 미량의 용존 유기물을 포함하며, 맑은 해수인 대양이 이에 속한다. Case-II water는 부유 무기입자, 육상 기원입자 및 높은 용존 유기물 농도, 인간이 만든 유입물을 포함한 탁한 해수이며, 연안 해역의 해수가 이에 속한다(Gordon, 1983). Case-II water에 속하는 연안 해역의 부유사 농도는 해양 연안 환경 변화를 모니터링 할 수 있는 중요한 지표 중 하나이다. 부유사가 연안 환경, 연안 양식장, 어장 환경에 어떤 영향을 주는지 파악할 수 있다. 채수를 통하여 부유사 농도를 추정하는 것은 시간적 경제적 제약이 따른다. 하지만 위성자료와 실측 자료간의 상관관계가 잘 나타나는 계수를 유도하면, 실측없이 위성영상만 있으면 연속적인 부유사 농도 분포를 볼 수 있을 것으로 기대된다. 이런 목적으로 Landsat ETM+ 자료를 이용하여 광양만의 표층 부유사 농도를 추정하였다. 위성 통과시간에 맞춰 2009년 9월 22일과 11월 25일 2차례에 걸쳐 부유사 농도와 반사도를 광양만 16개 정점에서 측정하였다. 부유사 농도는 표층의 해수를 채수하여 GF/F 필터를 이용해 측정되었고, 반사도는 Spectroradiometer를 사용하여 350nm부터 1050nm까지 1nm 간격으로 측정되었다. Landsat ETM+ 자료와 실측 반사도는 원격반사도 $R_{rs}$로 변환되었고, 두 가지 $R_{rs}$를 실측 부유사 농도와 비교하여 부유사 농도 산출 계수를 유도하였다. 경험적으로 구한 계수를 사용하여 위성영상을 부유사 농도로 계산하였으며, 이는 같은 날의 실측 부유사 농도와 비슷한 공간분포를 나타내었다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.181-185
• /
• 2005

The treated ballast water from previous treatment contains microorganisms and pathogenic organisms in an filtration treatment system. The advantage of this process can be filtrated to minimize the demage to screen clogging of drum filter with sweeping the solids off rotating the surface of the filter. Another advantage is to drop off the solids with controlling revolution of drum screen in pretreatment filtration process. Also the fact that it is easy to attach and detach a several type of screen for getting the expected water quality is another advantage, too. Filter rotation speed at 20rpmis 40.5cmHg and 40rpm is 36.6cmHg. Filter out impurities from ballast water over 60rpm is 35cmHg. Filtration system removal aquatic organism over $80{\mu}m$ in ballast water. This study shows that the filtration treatment system has a potential for the removal of ballast water.

• Fire Science and Engineering
• /
• v.31 no.4
• /
• pp.20-25
• /
• 2017

In the present study, the temperature distribution of droplet diffusion flames was predicted from the measurements of radiative emissions of soot particles formed. In order to predict the temperature distributions, the radiative emissions from soot particles filtered at both 700 nm and 900 nm were measured using CCD cameras and local emission distributions within the flame deconvoluted with Abel transformation were plugged into a two color method. The experimental results obtained from the present study demonstrate that the two color method as tool for temperature measurements is feasible but can introduce approximately 2% maturement errors in a deconvolution process depending on intervals for the line of sight. The estimated error in temperature measurements was found to be within 18 K at 2000 K.

• Asian Journal of Turfgrass Science
• /
• v.17 no.4
• /
• pp.155-163
• /
• 2003

This study was conducted to find out suitable rootzone profile, irrigation system, and turfgrass species for roof turf garden. Treatments of profile with soil amendment were Mixture I: Perlite(PL)60％＋Vermiculite(VC)20％＋Peatmoss(PM)20％, Mixture II: PL60％＋VC 10％＋PM20％＋Sand(SD)10％, Mixture III: PL60％＋VC20％＋PM20％ and Mixture IV: PL60％＋VC10％＋PM20％＋SD10％＋Styrofoam 5cm as a drain layer. To test trickle irrigation for roof garden, intervals of main pipe spacing(50cm, 100cm) and drop hole distance(15, 20, 30, 50 and 100cm)were treated, To select most suitable turfgrass species or mixture, Bermudagrass 'Konwoo', Zoysiagrass 'Konhee' and cool-season grass(Kentucky Bluegrass 80％ ＋ Perennial Ryegrass 20％, Tall Fescue 30％ ＋ KB50％ ＋ PR 20％)were tested. In particle size analysis, the soil amendments Perlite and vermiculite showed very even distribution, however, peatmoss contained mostly coarse particles with fiber over $\Phi$ 4.75mm. Under field moisture condition, vermiculite and peatmoss showed 350％ water holding capacity, on the other hand, sand or Perlite showed 115％ and 166％, respectively. Total weight of soil profile was 139.2kg/$m^2$ with Styrofoam drain layer without sand, which showed most lightest among treatments. Turf quality also resulted positve with Styrofoam drain layer installation. On trickle irrigation system, the proper interval of main drain pipe spacing and drop hole distance were 50cm and 50cm, respectively, In irrigation frequency, once per a day for 15 minute irrigation with 2 1/hr showed the best results on turf quality. Among turfgrass species or cool season grass mixture, warm season turfgrass fine leaf type zoysiagrass 'Konhee' and Bermudagrass 'Konwoo' showed very acceptable result on all over the treatments of rootzone and irrigation system. To apply cool season grasses for the roof garden, advanced researches may be needed to establish the proper soil amendment, rootzone profile, and irrigation system, Application of Bermudagrass 'Konwoo' for roof turf garden also needs successive tests to overcome winter injuries.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.9
• /
• pp.751-759
• /
• 2015

In this study, we investigate the Characteristics of the flowfields of a circular cylinder having a small triangular prism at the upstream side. We measure the fluid force on the circular cylinder and obtain a visualization of the flow fields using particle image velocimetry (PIV). The experimental parameters employed were the width ratios (H/B = 0.2~0.6) of the triangular prisms to the circular cylinder's diameter, and the gap ratios (G/B = 0~3) between the circular cylinder and the triangular prism. We observed that the drag reduction rate and Strouhal number of the circular cylinder increased and then decreased with G/B in the case of the same H/B. The drag reduction rate increased with H/B in the case of the same G/B. In the case where the circular cylinder had a small triangular prism, the stagnation regions were represented in the upstream and downstream sides of the circular cylinder.

• Journal of the Korean Magnetics Society
• /
• v.21 no.4
• /
• pp.136-140
• /
• 2011

Mechanical properties of degraded materials must be measured for evaluating the integrity of the facilities operating at high temperature. In fact it is complicated to obtain the different degraded specimens from an operating facility. Specimens of 1Cr-0.5Mo steel prepared by the isothermal heat treatment at $700^{\circ}C$ were tested, which has been widely used as tubes for heat exchangers and as plates for pressure vessels. The magnetic properties and Rockwell hardness (HRB) were measured at room temperature. The peak interval of Barkhausen noise envelope (PIBNE), coercivity, and hardness decreased with the increase of degradation. The magnetic and mechanical softening of matrix is likely to govern the properties of the specimen more than the hardening of grain boundary by carbide precipitations. The degradation of test material may be determined by the linear correlation of PIBNE and HRB. Degradation of 1Cr-0.5Mo steel could well be nondestructively evaluated by PIBNE measured with surface type probe.