• Journal of Auto-vehicle Safety Association
• /
• v.11 no.1
• /
• pp.36-39
• /
• 2019

The particulate matter that was emitted always come up by atmospheric environmental problem. Running on the road vehicles must have regular inspection at regular period and make sure the emissions of exhaust gases exceed the legal standards. Emission test for the atmospheric environment, but it is not free from the particulate matter. Currently, emission test of vehicle inspection is divided into regular inspection and close inspection. Regular inspection and close inspection differ not only the method of emission test, but also the facility standards that must have for this inspection. According to the "Regulations on the Implementation of Comprehensive vehicle Inspection, etc.", close inspection must have trapping device that is trap particulate matter by emission test to vehicle. However, regular inspection is different. Regular inspection do not specify any criteria for trapping facilities. Therefore, this study is confirm how to prevent the emission of particulate matter to the atmosphere during the year when mandatory trapping facilities are required to trapped particulate matter in the regular inspection.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.80-88
• /
• 2003

The present analysis quantifies the particulate contamination of KOMPSAT-2 satellite until in orbit life. Assumptions are defined about integration and test conditions and durations, then a budget is drawn. As KOMPSAT-2 activities are carried out in good cleanliness conditions, the particulate contamination budgets for satellite and instrument surfaces at BOL is fair. To summarise, in the baseline launch conditions (class 10,000) the contribution of satellite AIT and launch activities adds 500 PPM to MSC and STA apertures (telescope mirrors ; front lens ; baffle), 20,000 PPM to MSC and STA outer surfaces, 14 000 PPM to plate-form horizontal surfaces, 1400 PPM to plate-form vertical surfaces, 1000 PPM to plate-form radiators and less than 300 PPM to solar arra.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2003.05b
• /
• pp.327-328
• /
• 2003

경유자동차는 연료 특성상 매연을 포함한 입자상물질을 다량 배출하고 있으며, 이러한 디젤입자상물질은 인체에 유해한 발암성 및 돌연변이원성 물질들을 함유하고 있기 때문에 호흡 등을 통한 인체 유입시 건강에 매우 유해하다. 그러므로 디젤입자상물질을 저감시키기 위한 여러 가지 기술들 중 발생된 배출가스가 배기관을 통해 대기중으로 배출되기 전에 엔진 연소실과 배기관 사이에 후처리장치와 같은 기술들을 이용하여 이를 저감시키고 있다. 본 연구에서는 후처리장치들 중 세라믹필터에 백금과 같은 산화성이 우수한 촉매를 코팅하여 만든 촉매식 매연여과장치(DPF ; diesel particulate filter, SK제공)를 사용하였을 때 입자저감성능 및 입자크기별 분포특성을 살펴보고자 하였다. 이를 통해 도시대기오염 저감대책을 기초자료 및 환경학적, 보건학적 연구에 적극 활용하고자 한다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.231-232
• /
• 2001

도시지역의 주 오염물질 중 하나인 입자상 물질(Particulate Matter:PM)은 공기역학적 직경 2.5$\mu\textrm{m}$을 기준으로 이산형 분포를 하여 2.5$\mu\textrm{m}$이하를 미세입자, 2.5$\mu\textrm{m}$이상을 조대입자로 나뉜다. 이 미세입자는 주로 자동차 배출, 산업연소에서 배출되는 가스상 물질의 2차 반응으로 발생한다(Pope et al., 1995). 미세입자는 상당량이 2차 반응에서 생성되는 물질이며, 크기가 작은 대신 상대적으로 표면적이 크기 때문에 각종 중금속과 유해 대기오염물질과의 흡착이 용이하여 호흡기 계통의 질병을 일으킬 수 있는 확률이 조대입자에 비해 높다고 알려져 있어 인체에 미치는 영향이 클 것으로 시사되고 있다(Dockery et al., 1998). (중략)

• Journal of The Korean Association For Science Education
• /
• v.37 no.1
• /
• pp.25-37
• /
• 2017

The purpose of this study is to analyze the effects on particulate concept formation based on abductive reasoning model for elementary science class. For this study, an author selected two groups in the sixth grade. One group is an ordinary textbook-based control group (N=26) and the other group is an abductive reasoning model-based treatment group (N=26). After twelve lessons, the scores of Concepts Test for Gas were analyzed by t-test and two-way ANOVA. The result of t-test showed both the control and treatment groups have higher score than before they take the lesson. But after the lesson, an author found out that the treatment group had higher score than that of the control group. And compared to the number of particles expressed, the number of the treatment group were higher than that of the control class. The two-way ANOVA result revealed that the interaction effect between their cognitive level and treatment was not significant. And regardless of the level of cognition, the scores of treatment group are higher than those of control group. Therefore, abductive reasoning model-based elementary science class were found to be more effective for particulate concept formation. Based on the results, an author concluded that abductive reasoning model is very effective in teaching particulate concepts to elementary students.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.6
• /
• pp.78-84
• /
• 1996

In order to eliminate TPM(Total Particulate Matter) from a diesel engine, we designed and developed a particulate trap system using a burner, which was named as AEFR(Active Exhaust Feeding Regeneration) system. We have considered the temperature distributions and gradients in the filter being regenerated according to regeneration control schemes Ⅰ, Ⅱ and Ⅲ. Schemes Ⅲ has shown the most desirable peak temperature and temperature gradients in AFER system. Finally, it was concluded that much lower peak temperature and temperature gradients in the filter could be obtained than that of other advanced research results by our AEFR system.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.4
• /
• pp.84-91
• /
• 1996

A fractal analysis on fracture surface of aluminium-particulate SiC composites was attempted. As the volume fraction of SiC in composites increases, the fractal dimension tends to increase. However, no correlation between the fractal dimension and the fracture toughness in terms of critical energy release rate was observed. Since the fractal dimension represents the roughness of fracture surface, the fracture toughness would be a function of not only fracture surface roughness but also additional parameters. Thus the applicability of fractal analysis to the estimation of fracture toughness must depend on the proper choice and interpretation of additioal paramerters. In this paper, the size of characteristic strctural unit for fracture was considered as an additional parameter. As a result, the size appeared to be a function of only volume fraction of SiC. Finally, a master curve for fracture toughness of aluminium-particulate SiC composites was proposed as a function of fractal dimension and volume fraction of SiC.

• Particle and aerosol research
• /
• v.16 no.1
• /
• pp.9-17
• /
• 2020

The characteristics of particulate matter made from daily cooking at a Korean residential apartment house with three dwellers had been investigated for about 3 months. All data were recorded by an optical particle counter every minute at the kitchen. Types of cooking such as boiling, frying, and grilling that performed in the house were listed. Boiling only was used in 32% cases among total 234 meals. Frying and grilling were 14% and 11%, respectively. From an initial indoor particulate matter smaller than 10 ㎛ in diameter, the increases due to cooking are reported by size. In case of boiling, PM at 1-10 ㎛ size and under 1 ㎛ size little increased. Normally, particles from oil or combustion in a process of frying or grilling increased indoor PM. In a case of grilling, particle mass concentration in a region of 1-10 ㎛ in diameter increased as much as 295 ㎍/㎥. Mass concentration of particles smaller than 1 ㎛ increased as much as 33 ㎍/㎥.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.15 no.7
• /
• pp.611-617
• /
• 2003

The air-side particulate fouling in the heat exchangers of HVAC applications degrades the performance of cooling capacity, pressure drop across a heat exchanger, and indoor air quality. Indoor and outdoor air contaminants foul heat exchangers. The purpose of this study is to investigate the characteristics of the air-side particulate fouling materials in finned-tube heat exchangers of air conditioners. Air conditioners being used in the field such as inns, restaurants, and offices are collected in chronological order in use. Typical fouling materials on the heat exchangers include fibers and dusts ranged from 6.6 to 20.9 ${\mu}{\textrm}{m}$ in mass median diameter.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.133-138
• /
• 2006

Effective thermal conductivity of particulate reinforced composite has been predicted by Eshelby's equivalent inclusion method modified with Mori-Tanaka's mean field theory. The predicted results are compared with the experimental results from the literature. The model composite is polymer matrix filled with ceramic particles such as silica, alumina, and aluminum nitride. The preliminary examination by Eshelby type model shows that the predicted results are in good agreements with the experimental results for the composite with perfect spherical filler. As the shape of filler deviates from the perfect sphere, the predicted error increases. By using the aspect ratio of the filler deduced from the fixed filler volume fraction of 30%, the predicted results coincide well with the experimental results for filler volume fraction of 40% or less. Beyond this fraction, the predicted error increases rapidly. It can be finally concluded from the study that Eshelby type model can be applied to predict the thermal conductivity of the particulate composite with filler volume fraction less than 40%.