• Journal of environmental and Sanitary engineering
• /
• v.17 no.2
• /
• pp.11-17
• /
• 2002

Diesel particulate matter (DPM) is known to be one of the major harmful emissions produced by diesel engines. The majority of diesel particles are in the range of smaller than $I{\mu}\textrm{m}$. Because of their tiny volume, ultrafine diesel particles contribute very little to the total mass concentration which is currently regulated for automobile emissions. Diesel particles are known to have deleterious effects upon human health because they penetrate human respiratory tract and have negative effects on the health. The measurement of the number distribution of nanometer size particles (nanoparticles) in the diesel exhaust emission is important in order to evaluate their environmental and health impact, and to develop new types of diesel particulate filters. In this study, we directly sampled particulate matters emitted from a diesel truck mounted on the chassis dynamometer by a flow separator and dilution system, and measured the nanoparticles using two types of differential mobility analyzers combined with a Faraday cup electrometer (FCE) and a condensation particle counter (CPC). The particle size distributions were analyzed by changing engine operation condition, i.e. ratio of engine loading. The total number concentration of particles were increased with the engine loading ratio and the nanoparticles (less than 50nm) were affected by hydrocarbon (HC) concentration in the diesel exhaust.

• Journal of Korean Society for Atmospheric Environment
• /
• v.18 no.4
• /
• pp.297-303
• /
• 2002

Fine particles (d$_{p}$ < 2.5 $\mu$m) were measured using an annular denuder system (ADS) in Chongju. The data set was collected on fifty-eight different days with a 24-hr sampling period from October 27, 1995 through August 25, 1996. Particulate nitrate in the ADS was also measured on teflon and nylon filters in series behind denuders to collect HNO$_3$, HNO$_2$, SO$_2$and NH$_3$. From this study. the mean concentration of particulate nitrate of PM$_{2.5}$ in the ADS were seen with the following order: winter (5.05) ＞fall (4.36) ＞spring (3.92) > summer (1.10 $\mu\textrm{g}$/㎥). Nitrate losses, which calculated from the ratio of nylon filter nitrate to the sum of teflon and nylon filter nitrates, varied in the following manner summer (72.2%) > spring (42.6%) > fall (23.5%)> winter (0.4%). Especially, gaseous nitric acid was dominant at temperature higher than 8$^{\circ}C$ while particulate nitrate was major species in total nitrate below that temperature. This indicates the particulate nitrate loss is strongly correlated rather with ambient temperature.e.e.

• Journal of Environmental Science International
• /
• v.29 no.5
• /
• pp.531-539
• /
• 2020

To understand the composition, quantity, and quality of Suspended Particulate Organic Matter (SPOM) in the Gangneung Namdae Stream, Korea, we examined spatiotemporal variations in water temperature, salinity, chlorophlly a (Chl a), Particulate Organic Carbon (POC) and nitrogen (PON), and carbon stable isotope (δ¹³C) of SPOM at six stations in June (pre-monsoon), July (monsoon), and September (post-monsoon) 2017. With increasing precipitation, the average POC and C/N values increased significantly in July than in June. In September, the values decreased with decreasing precipitation. The δ¹³C values showed irregular spatiotemporal fluctuations among the stations and periods, thereby suggesting a greater contribution of autochthonous organic matter to the pool of SPOM than that of allochthonous organic matter derived from upstream. In addition, the large and irregular changes in POC, C/N ratio, C:Chl a, and δ¹³C compared to that of PON were observed for all periods among the stations, indicating a serial discontinuity of the stream. Our results suggest that the Gangneung Namdae Stream is significantly influenced by the increase in freshwater discharge caused by heavy rainfalls during the summer monsoon and post-monsoon periods.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.99-105
• /
• 2022

Public attention to the indoor environment of underground subway stations, which is a representative multi-use facility, has been increasing along with the increase in indoor activities. In underground stations, fine iron oxide, which affects the health of users, is generated because of the friction between wheels and rails. Among particulate pollutant reduction technologies, plants have been considered as a non-chemical air purification method, and their effects in reducing certain chemical species have been identified in previous studies. The present study aimed to derive the total quantitative and qualitative reduction effects of a bio-filter system comprising air purifying plants, installed in an underground subway station. The experiment proceeded in two ways. First, PM(particulate matter) reduction effect by vegetation biofilter was monitored with the IAQ(indoor air quality) station. In addition, chemical speciation analysis conducted on the samples collected from the experimental and control areas where plants and irrigation using SEM-EDS(scanning electron microscopy-energy dispersive X-ray spectroscopy). This study confirmed the effect of the vegetation bio-filter system in reducing the accumulation of particulate pollutants and transition and other metals that are harmful to the human body.

• Journal of the Korean Chemical Society
• /
• v.51 no.2
• /
• pp.213-222
• /
• 2007

In this study, science history program was developed to enhance student's concepts toward the particulate nature of matter and the understanding about the nature of science. And the effects of its application was investigated in the lesson of ‘Composition of Matter' in middle school science class. This science history program was based on genetic approach and included the contents from the old Greek natural philosophers to Avogadro. Before instruction, the test of understanding about nature of science was administered, and the science scores of the previous course were obtained, which were used as covariates. During 24 class hours, this study was conducted with two classes(experimental and comparison group) in a middle school in Seoul. The experimental group was received lessons by science history programs and the comparison group was received traditional lessons. After instruction, the scientific concept test, the test of understanding about nature of science were administered. The result of this study indicates that the scientific concept scores of experimental group were significantly higher than comparison group at p <.01 level of significance. It means that the students in experimental group has more sound conceptions about the particulate nature of matter and less mis conceptions about matter than the students in comparison group. However, there was no significant difference between two groups in the score of understanding about the nature of science.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.2
• /
• pp.149-157
• /
• 2005

PFC(Perfluorocarbon) decontamination process is one of best methods to remove hot particulate adhered at inside surface of hot cell and surface of equipment in hot cell. It was necessary to develop a particulate filtration equipment to reuse PFC solution used on PFC decontamination due to its high cost and to minimize the volume of second wastewater. Contamination characteristics of hot particulate were investigated and then a filtration process was presented to remove hot particulate in PFC solution generated through PFC decontamination process. The removal efficiency of PVDF(Poly vinylidene fluoride), PP(Polypropylene), Ceramic(Al$_{2}$O$_{3}$ filter showed more than 95$\%$. The removal efficiency of PVDF filter was a little lower than those of other kiters at same pressure(3psi). A ceramic filter showed a higher removal efficiency with other filters, while a little lower flux rate than other filters. Due to inorganic composition, a ceramic filter was highly stable against radio nuclides in comparison with PVDF and PP membrane, which generate H$_{2}$ gas in e-radioactivity atmosphere. Therefore, the adoption of ceramic filter is estimated to be suitable for the real nitration process.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.1
• /
• pp.86-96
• /
• 2002

The distributions of suspended particulate matter (SPM), chlorophyll a, particulate organic carbon (POC) and nitrogen (PON) and particulate biogenic silica (PBSi) along the salinity gradient were investigated in the Seomjin River estuary from March 1999 to April 2001. Sampling sites were set based on the surface salinity during each cruise rather than geographic locations. Concentrations of SPM were less than 20 mg/L, suggesting relatively low input of terrestrial SPM despite large freshwater discharge through Seomiin River, Chlorophyll a peaks occurred at 5$\~$ 15 psu salinity zone (10$\~$20 km from Nan Cho Island) in November 1999, at 15$\~$25 psu (10$\~$20 km) salinity zone in April 2000 and at 1$\~$15 psu salinity zone (15$\~$20 km) in October 2000 (ca. 8$\~$58%\mu$g/L). Concentrations of POC, PON and PBSi were also high at the same zone. Relatively low ratios of POC to chlorophyll a in mid-salinity zone where POM peak occurred suggests high contribution of living phytoplankton to the total POC. On the other hand, relatively high ratios of POC to chlorophyll $\alpha$ in very low salinity zone and the mouth of estuary indicated relatively high portions of detrital POC. Consequently, the low concentrations of SPM in this estuary and the high concentrations of chlorophyll $\alpha$ and the low ratios of POC to chlorophyll $\alpha$ in the mid-salinity zone suggest that production of living phytoplankton is primary factor in controlling distribution of POM along the salinity gradients in the Seomjin River estuary.

• Particle and aerosol research
• /
• v.10 no.4
• /
• pp.169-176
• /
• 2014

Air samples were collected at various altitudes (from 165 to 1153 m) to observe vertical distribution of particulate PAHs concentrations using a very compact and light particle sampling package developed by Eun et al.(2013). TD-GC-MS developed by Hwang et al.(2014) was applied to PAHs analysis for effective analysis of PAHs contained trace amounts in the samples. The ranges of total PAHs concentrations were from 6.95 to $96.0ng\;m^{-3}$ on the ground and from 3.75 to $21.74ng\;m^{-3}$ at high altitude, respectively. All of particulate PAHs concentrations measured on the ground were higher than those measured at high altitude, while, the profile of individual PAH compounds between the ground and high altitude samples were similar. It means the distribution of particulate PAHs concentrations at high altitude were affected by the emission of PAHs emitted from ground.

• Journal of Korea Foundry Society
• /
• v.14 no.3
• /
• pp.240-247
• /
• 1994

TiC particulate reinforced magnesium matrix composites were fabricated by melt stirring method. The effect of alloying elements on TiC particulate dispersion into molten magnesium and mechanical properties were investigated. The incorporation time is defined as the time required for dispersion of solid particles into molten metal. The incorporation time of TiC particles into molten pure magnesium was remarkably shorter and the particulated dispersion was more uniform than that of pure aluminum which was reported previously. The incorporation time was, prolonged by the addition of Al, Bi, Ca, Ce, Pb, Sn or Zn. The tensile strength increased and elongation decreased by the addition of Cu or Sn into the matrices and composites. Although, the tensile strength of the matrices and composites increased by alloying with Ca or Ce, the maximum elongation was observed at a content of about 1% for the matrices. By alloying with Zn, the tensile strength increased for the matrices and composites, but the elongation of the matrices increased. The pure magnesium and its alloy matrix composites reinforced with 20vol% TiC have the tensile strength of about 400MPa. This value is compared with the tensile strength of SiC whisker reinforced magnesium matrix composites fabricated by liquid infiltration method at the same volume fraction. There fore, the melt strirring method which has the advantages of simple process is considered to be efficient in fabricating magnesium matrix composites.

• Journal of the Korean Chemical Society
• /
• v.26 no.2
• /
• pp.88-94
• /
• 1982

The concentrations of gaseous ammonia and particulate ammonium emitted from a urea plan were measured, and the conversion rate of ammonia to ammonium was estimated. The conversion of ammonia to ammonium has two stages with transport time in the atmosphere. In the initial 15min the conversion rate was 3.2% min$^{-1}$, and thereafter 0.26% min$^{-1}$. The high conversion rate of ammonia to ammonium at the initial period of it's transport might be due to the dissolution of ammonia into water droplets formed by the decrease in temperature of the stack effluent. The concentration of ammonium is further increased by the decomposition of urea in alkaline droplet formed. Half-lives of ammonia gas at initial and latter slag were 16 min and 192 min respectively. No correlation of particulate ammonium concentration to temperature, relative humidity, and concentrations of sulfur dioxide, nitrogen oxides and airborne particulate matter were found in this field measurement.