• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.1
• /
• pp.53-62
• /
• 1992

Material can be degraded by using it for a long service under the high temperature and pressure circumstances, Therefore, material degradation can affect the strength of mechanical structures. At present, the life prediction of the degraded structures is considered as an important technical problem. In this paper, the degraded 21/4Cr-lMo steel is the material used for about 10 years around 400.deg. C in an oil refinery plant. The recovered one was prepared out of the above degraded steel by heat treatment for one hour at 650.deg. C. The degradation effect was investigated through the tension test, Hardness test and Charpy impact test. On the smooth surface material, the fatigue crack initiation, growth and coalescence stages of the distributed small cracks were investigated with photographs, and the crack length and density were measured. The measuring results were analyzed by quantative and statistical methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.39-45
• /
• 2017

In this study, permeable repair materials mainly composed of silicate - based inorganic materials(SIM), which are easily available domestically, were prepared as a basic study for the development of permeable repair materials using SIM. SIM were compared and examined for their performance as repair materials by selecting a product group which has many cases of use in foreign countries. The SIM used were mainly composed of sodium, potassium and lithium silicate. Performance evaluation of SIM was performed by absorption and penetration, compression and adhesion, rapid chloride ion penetration, rapid freezing and thawing, and chemical resistance test. According to the test results, SIM showed effective performance in all areas, mainly because SIM permeates into the interior of the capillary and has a dense internal microstructure. Therefore, it can be used variously to improve the durability of concrete based on the results of this experiment.

• Tribology and Lubricants
• /
• v.25 no.6
• /
• pp.387-398
• /
• 2009

The operation condition of recently designed pistons for high power and high speed diesel engine become more severe due to the increment of combustion pressure and temperature. So, in order to overcome high temperature, the application of the mono-metal cast aluminum alloy piston featuring an enclosed cast-in open cooling gallery has increased. In this research, it is developed a PCJ (piston cooling jet) rig tester, described the test procedure and validated the performance of sample piston cooling gallery design. Then the test rig will be used for developing the design technology of piston cooling gallery. The test rig is composed with oil reservoir and pumping system, oil jet system, piston fixing and moving system, collecting oil measuring system, and data measuring and recording system. It will be measured collecting efficiencies under conditions of a few piston positions, oil jet pressures and oil viscosities for a piston cooling gallery. Furthermore, the PCJ rig tester will be used for the optimum design of the oil cooling gallery which being applied to increase the cooling efficiency of pistons in diesel engines satisfying the EURO V emission regulation and the more.

• The Journal of Society for e-Business Studies
• /
• v.12 no.3
• /
• pp.75-93
• /
• 2007

This paper presents real-time online early fire warning systems developed for preserving cultural properties of Bulguksa which is a world heritage designated by UNESCO. The system is based on the ubiquitous sensor network employing 900MHz and 2.4GHz bands. In this paper, we analyze requirements that should be considered in building effective management systems of cultural heritages by using wireless sensor network. Finally, we introduce the architecture, sensor and network design, and software design of the fire warning systems which is an initial version of U-Bulguksa. The current version of systems has been operating in Bukguksa for a few months. U-Bukguksa project sponsored by National Information Society Agency is ultimately aimed at developing an integrated system of U-cultural heritage management and U-tourism. The former aims to conserve and manage intangible cultural properties by providing a variety of environmental information such as erosion, crack, and gradient as well as fire which are important causes of loss and damage in real-time and online. The latter refers to the intelligent tourism information and guidance systems allowing tourists to get the personalized content on cultural heritages and help guidance with mobile devices in Bulguksa.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.2
• /
• pp.109-113
• /
• 1984

This study was conducted to get basic information about yield capacity and major agronomic characteristics of rice varieties with large grain. The results obtained are as follows; Between grain weight and grain components such as length, width and thickness showed highly positive correlation. The relationship between grain length and grain shape (Length/Width) was clear (r=0.5707${\ast}\;{\ast}$). 1, 000 grain weight of 14 rice varieties with large grain was negatively correlated with number of spikelets per panicle, number of panicles per hill, ripening ratio, total dry matter, grain yield and harvest index, but less clear. The relationship between grain weight of 14 rice varieties with large grain and growth duration was less clear (r=0.440). 1, 000 grain weight of 20 rice varieties differing in grain size showed a highly positive correlation with chalkiness of rice kernel (r=0.8477${\ast}\;{\ast}$).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.3
• /
• pp.294-301
• /
• 1987

This experiment was carried out to investigate the occurrence of tiller and its proportion to grain yield under 5 different plant densities. Plant density 5 x 5cm was more favorable for increasing the number of spikes per unit area, where leads to improve grain yield. Effective tillers showed only main stem, M$_1$-axil and M$_2$-axil, indication more effective tillers in M$_1$ rather than main stem. Every tillers held at least 6 leaves to bear spikes, indicating that main stem has 12 -13 leaves. Leaves attached on main stem M$\sub$0/ and M$_1$ were very important as main source of photosynthesis, especially under more compart plant densities while leaves of M$_1$ occupied 66.8% in a plant. The proportion of grain yield of each tiller to total grain yield per plant was high in main stem under conpact plant density, in M$_1$ stems under less compact plant density, and in M$_2$ -stems under wide plant density, indicating same result on multiple regression analysis.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.409-415
• /
• 1984

Finding the variations of principal agronomic traits, fourteen malting barley cultivars were tested with both narrow-spaced row seeding and broadcasting on high ridge respectively. The seeding rates were varied as 15, 20, 25, 30 and 35 liter per 10a in the narrow-spaced row seeding and 20, 25, 30, 35, and 40 litre in the broad casting on his ridge respectively. As a result of the test, there were highly significant differences in variation pattern of assessed traits among cultivars. However, the additional seeding rates in both seeding methods caused the drifts of earlier heading and maturity, longer in culm length, linear increase in number of spike and yields per unit area, slight reduction in 1000 grain weight, and slight increase in one litre weight, but no changes in number of grain per spike.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.1
• /
• pp.84-92
• /
• 1985

This experiment was carried out to study the morphological traits, yield and yield components of barley cultivars - Kangbori, Olbori and Suwon 18 - on different seeding dates. It appeared generally rapid development of young spike from late stage of floret differentiation (X stage) to complete it at heading stage. Young spike appeared more influencials by the different seeding dates rather than years and cultivars. Stem started the development from late stage of spikelet differentiation (VII stage) to early stage of floret differentiation (IX stage), indicating the continuing development from basal to upper internodes. Number of spikes per unit area showed more effect in seeding date rather than cultivar and year. However, number of kernels per spike and 1,000 kernel weight affected more due to years rather than cultivar and seeding date. It was significantly difference in grain yield according to different seeding dates.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.4
• /
• pp.321-327
• /
• 1984

Grain yield of rice plants grown in outmost first and second rows in paddy field blocked by 50 cm wide levee was averaged 30 percent more than that in center rows, but yield increased percents in border rows were significantly different between varieties. Average border effect through 3 varieties were recognized only in first and second rows from levee, but most vigorous variety, Hangangchal, showed border effect up to fourth rows from levee. Rice plants grown in border rows had more number of panicles per hill and more number of spikelets per panicle. Total dry matter weight and average leaf area of rice plants in border rows differed with those in center rows from 30 to 60 days after transplanting. Early maturing variety showed the difference between border and center rows quickly concerning to total dry matter weight and leaf area. Rice plants grown in border rows showed higher values of CGR, RGR, NAR, and LAR through the growth duration except 1 or 2 growing periods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.332-339
• /
• 1991

본 시험은 1968-1990년까지 23년간을 동일시험구에서 무비구를 비롯하여 무질소구, 무인산구, 무가리구, 3요소구, 3요소+유기물구(퇴비 또는 생고), 3요소十석회구를 설치하고, 1990년수도품종 ‘진흥’을 공시하여 그 수량생산성과 미질의 외관 및 이화학적특성을 조사하므로써 장기간에 걸친 시비법이 수량과 양질미생산에 미치는 영향을 검토한 바 그 결과를 요약하면 다음과 같다 1 수량생산성은 3요소구에 비해 3요소+유기물구에서 3-7%의 증수효과가 있었으며, 1 증수요인은 수수와 1수당입수의 증가였다. 2. 무가리구의 수량은 85%로 등숙률의 저하가 감수요인이며, 무인산구는 74%로 수수의 감소가 감수요인이며, 무질소구와 무비구는 59-33%로 수수와 1수립수의 현저한 감소가 감소요인이었다. 3. 미질의 외관적 특성은 무비, 무질소, 무인산구에서 수량은 크게 낮은 반면에 완전미율이 높고 동할미, 심복백미율이 현저히 적으며 3미립의 투명도도 높아 양질의 외관을 보였다. 이에 대해 고수량을 보인 3요소＋유기물구(퇴비, 생고)에서 완전미율이 낮고 동할미, 심복백미율이 높고 투명도가 낮아 외관적 미질이 저하하는 경향이었다. 4 미질검정으로 이용되고 있는 물리적 특성인 알칼리붕괴성과 gel consistency는 처리간 차이를 인정할 수 없었다. 5. 식미의 량부로 평가하고 있는 미립의 화학적 특성은 처리간 차이를 인정할 수 있었다. 즉 단백질함량은 3요소＋유기물구에서 높고 무비구에서 낮았으며 Mg, Mg/K, Mg/KㆍN, Mg/KㆍN\ulcornerAmylose는 무비, 무질소, 무가리구에서 높고, 3요소+유기물. 3요소+석회구에서 낮았다 6. 이상과 같은 결과로 미루어 본 실험에 시용된 절대질소량은 많지 않음에도 불구하고 3요소＋유기물구는 유기물 분해에 따른 질소의 추비적 효과가 나타나서 무비, 무질소구에 비해 동할미, 심복백미 등 미립의 외관적 특성을 저하시키고, 단백질함량은 높이고 Mg/K\ulcornerNㆍAmylose를 낮추어 식미를 저하시키는 것으로 해석된다 7. 취급특성으로서의 흡수율, 취급액요드정색도, 취급용액출고형물은 처리간 명백한 경향을 발견할 수 없었다.