• 유체기계공업학회:학술대회논문집
• /
• 1998.02a
• /
• pp.150-156
• /
• 1998

가스터어빈 트랜지션 덕트 내에서의 공기 역학적인 거동을 입구 스월각의 변화에 대하여 고찰하였다. 트렌지션 덕트가 작은 확산각(divergence angle)을 가지더라도 스트럿 영향으로 인한 탈설계점에서의 유동 패턴은 트랜지션 덕트 내에서의 유동특성을 더욱 악화시킨다. 시험범위의 스월각은 마하수 변화에 따라 손실계수에 큰 영향을 주지 못하였으며 트랜지션 덕트 내에서의 손실 정조는 만족할만 하나, 시험결과에 따르면 저압터빈의 노즐손실은 큰 입사각의 영향으로 커질것으로 생각되며, 또한 스트럿으로부터 떨어져 나오는 와류는 저압터빈의 로우터 블레이드의 진동에 악영향을 미칠 것으로 생각된다.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2591-2596
• /
• 2007

The effect of incidence angle on the three-dimensional flow and aerodynamic loss in the downstream region of a high-turning turbine rotor blade has been investigated with a straight miniature five-hole probe. The incidence angle is changed to be +10, +5, 0, -10, -20, -30 and -40 degrees. The results show that the positive incidence reinforces the three-dimensional vortical flows within the turbine passage including the passage vortex, but the negative incidence weaken them significantly. A small increment in the positive incidence angle results in a remarkable aerodynamic loss increase, while increasing the incidence angle in the negative range leads to a very small change in the aerodynamic loss.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.23 no.3
• /
• pp.35-43
• /
• 2019

In this study, a guide vane with varying positions and incidence angles was adopted to a pin-fin channel to analyze the change in thermal performance and pressure loss characteristics. A numerical analysis was conducted to investigate the effect of incidence angles and positions on heat transfer and flow characteristics at Re =1400. The results of it were compared those of a pin-fin channel without a guide vane. In case 1 when the incidence angle is $0^{\circ}$, the heat transfer performance is maximized and improved by approximately 5% when compared to the pin-fin channel without the guide vane. In case 2 when the incidence angle is $10^{\circ}$, the pressure loss is minimized and decreased by approximately 1.9% when compared to the pin-fin channel without the guide vane.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.5 no.2
• /
• pp.136-148
• /
• 1997

The present study has been carried out to develop a computational procedure for the analysis of the off-design performance in centrifugal compressors with vaneless diffusers by integrating empirical loss models and analytical equations. Losses in centrifugal compressors stem from a number of sources and their exact calculation is not yet possible. This study investigates several modeling schemes and shows that a fairly good prediction can be achieved by a proper selection of the most important flow parameters resulting form a meanline one-dimensional analysis. The performance maps for compressors are calculated and compared with measured performance maps. The off-design performance characteristics in terms of the pressure ratio vs. mass flow produced have generally correct forms. However, no universal means have been found to predict accurately the onset of surge. The prediction method developed through this study can serve as a tool to ensure good matching between parts and it can assist the understanding of the operational characteristics of general purpose centrifugal compressors.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.161-164
• /
• 1998

광대역 주파수 상에서 외부로부터 입사하는 전자파를 산란시키지 않고 유전체 내부에서 흡수시키기 위해 유전체를 다층으로 배열하여 전파 흡수체를 최적 설계하고자 한다. 수직 및 여러 각도로 전파가 입사하는 경우 각 유전층의 두께, 유전 상수, 손실 탄젠트 등의 설계변수를 유전자 앨거리즘을 이용하여 최적화한다. 다극함수에서의 부분 초기화 유전자 앨거리즘의 성능 향상을 위해 부분 초기화율, 부분 초기화 시점, 스케일 인자의 변화에 따른 성능을 비교, 개선하여 흡수체 설계에 적용하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.11
• /
• pp.1217-1223
• /
• 2007

Advanced microwave absorbers for wide oblique incidence angles are required in many applications including wireless communication or vehicle identification in ITS(Intelligent Transport System) where 5.8 GHz DSRC(Dedicated Short Range Communication) system is applied. In this study, two-layered microwave absorber(with a laminate structure of dielectric/magnetic composites) has been designed for the achievement of low reflection coefficient over wide incidence angles at 5.8 GHz. Iron flake particles are used as the filler in the absorbing layer, and the magnetic composite sheet exhibits high magnetic loss due to ferromagnetic resonance in gigahertz frequencies. The surface layer of low dielectric constant containing small amount of carbon black is used as the impedance transformer. On the basis of transmission line theory, the reflection loss has been calculated for the two-layer structure with variation of incident angles for both TE(Transverse Electric) and TM(Transverse Magnetic) polarizations. At the optimum thickness of the composite layers, a low value of reflection loss(less than -10 dB) has been predicted for wide incidence angles up to $55^{\circ}$ which is in good agreement with the measured value determined by free-space measurement.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.5
• /
• pp.75-81
• /
• 2010

Adaptive array antenna system estimates target signal, as making a null pattern toward the interference signal. However, receiving a coherent interference signal at adaptive array antenna system, as target signal is regarded as interference signal, the performance of system rapidly decreases. The main beam does not direct an incidence direction of target signal due to sensitivity in directivity error. This paper proposes beamforming algorithm which combines high order limit condition and directivity error modify method. And it minimizes degree of freedom and decreases interference signal and directivity error using proposed algorithm. This paper compares and analyzes the performance of proposed algorithm and general algorithm using simulation. In this paper, the proposed algorithm correctly estimates an incident angle, but general algorithm occurs an error of about $0.8^{\circ}$.

• The Journal of the Acoustical Society of Korea
• /
• v.40 no.4
• /
• pp.297-303
• /
• 2021

When sound waves propagate over long distances in shallow water, measured transmission loss is greater than predicted one using underwater acoustic model with the Rayleigh reflection model due to inhomogeneity of the bottom. Accordingly, the US Navy predicts sound wave propagation by applying the empirical formula-based High Frequency Bottom Loss (HFBL) model. In this study, the measurement and analysis of transmission loss was conducted using mid-frequency (2.3 kHz, 3 kHz) in the shallow water of the East Sea in summer. BELLHOP eigenray tracing output shows that only sound waves with lower grazing angle than the critical angle propagate long distances for several kilometers or more, and the difference between the predicted transmission loss based on the Rayleigh reflection model and the measured transmission loss tend to increase along the propagation range. By comparing the Rayleigh reflection model and the HFBL model at the high grazing angle region, the bottom province, the input value of the HFBL model, is estimated and BELLHOP transmission loss with HFBL model is compared to measured transmission loss. As a result, it agrees well with the measurements of transmission loss.

• Journal of KSNVE
• /
• v.7 no.6
• /
• pp.945-952
• /
• 1997

This paper shows the feasibility of the suggestion that the angle distribution of incident sound to panels might be gaussian, instead of the conventional uniform distribution in the analysis of transmission loss of panels. To prove the suggestion, the problems with the diffuse sound field in a reverberation room are examined by case studies and the comparision of the prediction with the measurement of sound transmission loss of walls are performed. The results of the comparision show good agreement between the two values.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.7
• /
• pp.15-22
• /
• 2000

This paper proposes a distributed highlight algorithm to generate efficiently echo signal for underwater target. In this algorithm, echo signal is synthesized by discontinuity highlights that are varied to incident angle, by equivalent and specified position highlights according to the spatial target structure. Completed UTAHID(Underwater TArget by Highlight Distribution) model is confrimed that PTS, ETS, echo elongation effect, target time spreading loss and envelope fluctuation are satisfied to expected values by various simulations. Thus it can be efficiently used in all sorts of real systems related to underwater target echo signal synthesis in active sonar.