• Cement Symposium
• /
• no.31
• /
• pp.198-204
• /
• 2004

온라인 분쇄입도 조절 콘트롤(Insitec) 시스템은 시멘트의 생산공정상에 시멘트입도를 직접 측정하고 측정된 데이터를 이용하여 공정을 제어할수 있는 새로운 방법으로서, 세계적으로 50여개의 시멘트 생산 현장에 이러한 시스템이 설치되어 있다. 시멘트의 생산공정은 일반적인 분쇄공정과는 차별되는 나름데로의 특성이 있으므로 이를 개발한 Malvern Instrument사(영국)에서는 시멘트 공장의 특성에 적합한 시스템을 개발해왔다. 우선 가장 이상적인 Instec 시스템의 설치를 위해서는 다음과 같이 3단계의 절차가 필요하다. 첫 단계로서 공정상의 변수로 적용되어야 될 변화를 찾아 모니터링하고 연관시키는 것이다. 그 다음 단계에서, 시멘트 생산공정을 24시간 동안 모니터링하여 설정 값과 측정 값과의 차이점과 원인을 찾아내어 요인을 결정하게 되고, 마지막 단계에서는 현장에 장비를 설치, 상기의 반복과정을 마무리하고 공정을 제어할 수 있게 하는 것이다. 시멘트 생산공정에서 분쇄기, 분급기 및 송풍기 등의 회전수 증가와 감소, 시멘트조성의 변화와 같은 중요한 공정상의 변화가 있을 경우, 이로 인해 생기는 입도의 영향은 Insitec 시스템의 입도관리에 기록되게 된다. 본 논문에서는 스페인의 Jerez에 있는 Holcim 플랜트에 설치된 Insitech를 이용하여 운전상의 변수 등을 측정하고 제어하며 시멘트 공정에 활용하는 방안에 대한 연구를 소개한 것이다.

• Proceedings of the KSR Conference
• /
• 2003.10b
• /
• pp.85-91
• /
• 2003

본 연구에서는 원과 선분을 이용하여 복잡한 형상의 입자를 표현할 수 있는 2차원 개별요소법(DEM) 알고리즘에 3종류(균등분포, 정규분포, 대수정규분포)의 입도분포를 구현할 수 있도록 하였다. 개발된 프로그램을 이용하여 다양한 반지름을 갖는 원형요소를 구현하고 도상자갈을 원하는 입도분포로 모델링할 수 있었다. 그리고 우선적으로 균등분포에 대하여 변위제어 하중 재하 방식에 의하여 도상으로부터 노반으로 전달되는 응력을 파악하였다.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.304-305
• /
• 2009

• Resources Recycling
• /
• v.24 no.6
• /
• pp.17-23
• /
• 2015

Flue gas desulfurization(FGD) is the technique to remove $SO_2$ gas from stack gases of coal-fired plants. Many researcher have studied to replace the desulfurizing agent because FGD systems use a lot of limestone and energy. In this study, we use the limestone sludge which is a by-product of steel industry in order to replace desulfurizing agent of FGD system by control the particle size of limestone sludge. And desulfurization performance test is implemented by investigating $SO_2$ gas removal properties upon the characteristic of the limestone sludge with various particle size.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.6
• /
• pp.761-770
• /
• 2014

In september 2004 and 2006, topographical and sedimentological survey were carried out using multibeam echosounder, which were to investigate shape characteristics, temporal changes and control factors of the subaqueous dunes in the southern Gyeonggi Bay. The present tidal current and sedimentary characteristics of study area make conditions that the sizes (length and height) of large subaqueous dunes are developed and maintained sufficiently. The change of sedimentary characteristics over time, the decrease in grain size causes reduction in the height of very large subaqueous dunes. Therefore it shows that the grain size of surface sediments is a primary control factor in defining subaqueous dune sizes in the study area.

• Resources Recycling
• /
• v.5 no.3
• /
• pp.65-72
• /
• 1996

Colloidal calcium wrbonate(diametcr 0.02-0 09 m~wja s developed to maintain the mamenl of pnriide formatio~>w ~lhoutsurlace trealment. The control factors of particle size and optimum condiliuna for compound fam*tition has not bccn studiedyet. This shldy war aimed at developing a method fur compounding colloidal calcium carbonfcte to cnl~hol cubic calciumcarbonate, and then compounding the b-o types oI precipitated calcium wrbonatc under optimum wndilrans Calc~umhydroxide was calcinated at 1, lWC far two hours, md then hydrated for 30 minutes at t i i O rprn and ambiznt temperahlle.Two-liter suspension was subjected to the contact with carbon dioxide at l5"C, 600 ipxn and C0= injection in the rate of 1 Umin Two types of dcium carbonate(cuhic calcium carbonatc(0 24.9 pm) md collnidd calcium mhnnate (0.02-0 09 pm))were compounded by "wing the concentrations of calcium oxide and ihe suspension were compounded. It was found that theoptimum concentrations of each suspensions were 5 wt % and 2.5 \I*.% respectively. ' h c key control factor af thc parlicle slzcdislribution was the concenkation al the suspension. The size of compounded particles was measured by a Zcla S k r 'fieaverage particle size of the cubic calcium carbonate aas 223.4 nm(0.223 pm), and that of thc colloidal a~lciumc arbonate was93.6 nm (0.093 km). Ihe particle sizc was evenly cantlolled on a stdblc basis in an H, O reaction system.asis in an H, O reaction system.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.367-368
• /
• 2009

High-rise building in modern society is becoming increasingly necessary to reduce the weight of the building. Accordingly, increased use of lightweight bubble concrete is a trend Porous ceramics (ALC) is the most common, lightweight bubble concrete. And it is by lightweight blocks the same used as building materials. This research is related to the physical characteristics of ALC controlled by particle size and contents of raw materials.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.46-53
• /
• 2019

Cement mortar was hydrothermal-synthesized with particle size of tailings using scheelite tailings deposited without proper treatment, and its physical properties were investigated. The mixing ratios of water-cement and sand-cement were fixed at 75 % and 400 %, respectively, during preparing cemnt mortar, and the sand was replaced by the tailings at 0 ~ 50 %. The particle size of tailings was controlled at 9.3 ~ 53.0 ℃, and the hydrothermal temperature was kept at 60 ~ 180 ℃ for 6 hours after the temperature increased to pretermined temperature with 2 ℃ heating rate. The compressive strength increased with increasing hydrothermal temperature. The compressive strengths were 55.2 MPa and 54.5 MPa when the mortars were prepared with 30 % low arsenic and high arsenic tailings after 60 min grinding. The compresiive strenght was enhanced 300 % compared with reference sample.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.7
• /
• pp.752-765
• /
• 1999

대부분 병렬처리 시스템에서 성능 파라미터는 복잡하고 프로그램의 수행 시 예견할 수 없게 변하기 때문에 컴파일러가 프로그램 수행에 대한 최적의 성능 파라미터들을 컴파일 시에 결정하기가 힘들다. 본 논문은 병렬 처리 시스템의 프로그램 수행 시, 변화하는 시스템 성능 상태에 따라 전체 성능이 최적화로 적응하는 적응 수행 방식을 제안한다. 본 논문에서는 이 적응 수행 방식 중에 적응 프로그램 수행을 위한 이론적인 방법론 및 구현 방법에 대해 제안하고 적응 제어 수행을 위해 프로그램의 데이타 공유 단위에 대한 적응방식(적응 입도 방식)을 사용한다. 적응 프로그램 수행 방식은 프로그램 수행 시 하드웨어와 컴파일러의 도움으로 프로그램 자신이 최적의 성능을 얻을 수 있도록 적응하는 방식이다. 적응 제어 수행을 위해 수행 시에 병렬 분산 공유 메모리 시스템에서 프로세서 간 공유될 수 있은 데이타의 공유 상태에 따라 공유 데이타의 크기를 변화시키는 적응 입도 방식을 적용했다. 적응 입도 방식은 기존의 공유 메모리 시스템의 공유 데이타 단위의 통신 방식에 대단위 데이타의 전송 방식을 사용자의 입장에 투명하게 통합한 방식이다. 시뮬레이션 결과에 의하면 적응 입도 방식에 의해서 하드웨어 분산 공유 메모리 시스템보다 43%까지 성능이 개선되었다. Abstract On parallel machines, in which performance parameters change dynamically in complex and unpredictable ways, it is difficult for compilers to predict the optimal values of the parameters at compile time. Furthermore, these optimal values may change as the program executes. This paper addresses this problem by proposing adaptive execution that makes the program or control execution adapt in response to changes in machine conditions. Adaptive program execution makes it possible for programs to adapt themselves through the collaboration of the hardware and the compiler. For adaptive control execution, we applied the adaptive scheme to the granularity of sharing adaptive granularity. Adaptive granularity is a communication scheme that effectively and transparently integrates bulk transfer into the shared memory paradigm, with a varying granularity depending on the sharing behavior. Simulation results show that adaptive granularity improves performance up to 43% over the hardware implementation of distributed shared memory systems.

• Clean Technology
• /
• v.19 no.3
• /
• pp.249-256
• /
• 2013

The experiments have been performed to obtain zinc complex compound with smaller particle sizes, which is used as a charge control agent in manufacturing toner. Metallic salts and polyhydric alcohols have been studied to investigate their effects on the formation and the triboelectric charge of zinc complex-compound particle with different sizes. Reactants such as zinc chloride and 3,5-di-tert.-butyl salicylic acid have been used to form the complex compound. Polyethylene glycol (PEG-300), glycerin and ethylene glycol have been added into the zinc chloride solution beforehand to lower the reaction rate in the formation of zinc complex-compound. Aluminium(III) chloride has been mixed in the zinc chloride solution beforehand to restrain the particle size from growing. When PEG-300 and aluminium(III) chloride are used to lower the reaction rate and to restrain the particle size from growing, the average particle size of zinc complex compound decreases from $5.28{\mu}m$ to $2.33{\mu}m$, which was 44.1% of $5.28{\mu}m$.