• International Journal of Highway Engineering
• /
• v.7 no.4 s.26
• /
• pp.125-140
• /
• 2005

This study suggests a suitable random transverse tining for reduction tire/road noise from concrete pavement. Through literature reviews, random transverse tining that can disperse the energy concentrated to the specific frequency was suggested using the LCG(linear congruential generators) algorithm. The spacing of tining from this study is applied to Daegu-Pohang express highway. For the purpose oi comparison, two other random tining sections were included that are research products from Chung-Ang university and Wisconsin DOT. In result of pass-by noise measurement by car, though designed section is superior to the others as noise reduction by reducing pitch noise, the effectiveness is not large. In case of traffic noise measurement, lower noise was observed at random transverse tining sections than uniformly transverse tining section, too. But there are seine differences between pass-by noise and traffic noise.

• International Journal of Highway Engineering
• /
• v.6 no.1 s.19
• /
• pp.1-11
• /
• 2004

This study tries to propose the most effective pavement texture method through the performance evaluation of variable texture methods. Noise 2$\sim$3dB is reduced in the section of uniform space 18m longitudinal tinning. This result is proved by comparing the magnitude of noise in two sections. The noise of 26mm longitudinal firming section is greater than that of 18mm section by 2$\sim$3dB(A). The skid resistances measured in all test section show the reasonable results. The roughness or all the test sections satisfies AASHTO roughness standard (PrI 16cm/km). The result or questionnaire survey about driving quality shows that the longitudinal tinning is the most effective method. As the result of a visual measurement, it is proved that the section applied uniform space 26mm longitudinal tinning and the general section applied uniform space 26mm transverse tinning could drain water effectively. As the result of analysis with the ranking method, the 18mm longitudinal tinning in selected as one of the most effective tinning methods. In addition, 26mm longitudinal tinning, random space transverse tinning, and transverse drag are selected in order.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1581-1582
• /
• 2006

본 논문은 그루빙(grooving), 타이닝(tining), 텍스쳐(texture) 등의 포장도로의 표면 상태를 차량에 장착된 고성능의 레이저 변위센서를 사용하여 주행 중에 정밀하게 측정하는 도로 표면 측정 장비 개발에 관한 논문이다. 본 논문에서는 전체 시스템을 설계 및 시험제작 하였으며, 차량 주행을 모사한 실험 모형을 이용한 실내 실험 및 시험도로에서의 실제 도로 표면 측정 실험을 실시하였다. 실내 포장도면 모사장비를 이용한 실험 결과 타이닝 폭 오차 2%, 깊이 오차 4%(60km/h)를 얻었으며, 실외에서 차량에 레이저센서를 장착 후 측정한 실험에서는 폭 오차 3.24%, 깊이 오차 5% (50km/h)가 측정되었다. 이러한 실험 결과를 토대로 시험도로 상의 실제 도로 표면 측정 실험에서는 25mm, 18mm, 26mm, 그리고 임의의 간격의 횡 방향 및 종 방향 타이닝을 측정하였고 이를 확인하였다.