• Korean Journal of Food Science and Technology
• /
• v.15 no.3
• /
• pp.262-268
• /
• 1983

Properties of noodle prepared with FPC and wheat flour were investigated, and the results were summarized as follows: 1. Farinogram showed that the water absorption ratio and dough development time increased as the mixing level of FPC to wheat flour increased. 2. Amylogram showed that the maximum viscosity of the composite flour decreased as the content of FPC increased. 3. In the textural parameters, such as hardness, cohesiveness and gumminess of noodles, there were no marked differences between wheat flour and cooked noodles from the composite flour of 3% or 5% FPC-97% or 95% wheat flour. 4. Regarding weight and volume of the cooked noodles, those of cooked noodles from the composite flour of 3% or 5% FPC-97% or 95% wheat flour were similar to wheat flour alone. As the content of FPC in noodle increased, however, those of cooked noodles slightly decreased, and soup turbidity increased. 5. Results of sensory evaluations showed that the noodle from the composite flour of 3% FPC-97 wheat flour appeared to be the most acceptable, and the noodles from the composite flour of 5% or 7% FPC-95% or 93% wheat flour were judged as acceptable as the wheat flour alone.

• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.155-165
• /
• 2012

In any military services, young leaders are superiors to another and the leaders must be equipped with not only command and control(C2) and management capabilities but with a skill set that addresses their service members' problems and hardships throughout a counseling approach. These young leaders other than regular professional counselors are wearing dual hats as a commander and a counselor to address their service member's issues. There are couple of hours to give a lecture about counseling during the basic training course, however, we noticed that there are some limitations to cover up the uniqueness of counseling during the course, since we cannot rule out the unique vertical situation within military system that runs by its hierarchy. Therefore, we developed education program in order to enhance commander's counseling skills, refined the program with thorough review and commentary by professions and military commanders, and provided 10 events of program to the young leaders. As a result, the leaders scored high on self-effectiveness, communication skills, and counseling development-level. If we adjust minor changes to the program, it will be the outstanding program to improve young leaders' counseling capability.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.3
• /
• pp.11-20
• /
• 2015

Fire incidents, which occur every year, cause huge damage to properties and humans. Significant time and costs have been invested in minimizing and responding to such accidents. With the recent advances in the development of spatial information, in the firefighting field, studies have been conducted to effectively bring fires under control using GIS(Geographic Information System). Most of such studies, however, focused on individual analyses of firefighting-related factors, but comprehensive research on the vulnerability factors in fire control activities, a major part of firefighting activity, has yet to be done. This study sought to pinpoint and analyze the factors that obstruct fire controlling, and to gather relevant data and create GIS-based databases. Based on such database, GIS-based overlay analysis was conducted to produce a fire control vulnerability map. The findings of this study will enable a quantitative analysis of firefighting obstruction factors to assist the personnel engaging in firefighting in rational decision-making, such as in formulating a firefighting operation plan for securing golden time.

• The KIPS Transactions:PartD
• /
• v.12D no.5 s.101
• /
• pp.797-806
• /
• 2005

The objective of the In-h(High Level Architecture) have recommended by DoD(Department of Defense) is to facilitate interoperability among simulations and to promote reuse of their components. There are many legacy simulation softwares developed before the HLA becomes simulation standard. The integration of legacy simulations into federations using the HLA is an important research topic in M&S(Modeling and Simulation) area. Legacy simulation softwares of the mission critical industry such as nuclear and aerospace are generally use Fortran language. However, the reuse of those is not easy because the HLA is not support Fortran language. This paper suggests a integration method which minimizes the modification of legacy simulation software and migrates the legacy simulation software to HLA federation. Each federate participating in federation have the separated executables that communicate via a shared memory created at run-time. Two types of shared memory blocks are used for publication and subscription. Declaration block for global variables used in legacy simulation software is separated for publication and subscription and then mapped as classes of objects and interactions for the HLA FOM design. To validate the suggested method, we approached the HLA integration of legacy nuclear simulation code being used in plant design and to observe the integration results, we used the FMT(Federation Management Tool). The diagnostic information which the FTM displays showed that our method can be successfully and effectively used for a HLA federation.

• Journal of Aerospace System Engineering
• /
• v.12 no.1
• /
• pp.10-16
• /
• 2018

In 2018 and 2019, GEO-KOMPSAT-2A and GEO-KOMPSAT-2B will be launched in order to succeed the COMS mission. The two satellites will be collocated in $128.25{\pm}0.05$ degrees East. For precise ranging and orbit determination, the GEO-KOMPSAT-2B will be equipped with LRA (Laser Retroreflector Assembly) and SLR (Satellite Laser Ranging) systems will be utilized. This systems are located in Geochang. In this case, the laser beam emitted from the SLR station can cause problems in terms of safety of optical payloads and image quality. As a solution of this possibility, the laser ranging will be done during the night time when the shutters of the optical payloads remain closed. Still, the optical payload of the GEO-KOMPSAT-2A is not safe from the laser beam because its optical payload shall continue its mission for 24 hours a day. In order to handle this problem, the laser ranging shall be limited to time slots when the angular distance between two satellites observed from the Geochang SLR station is large enough. In this paper, through orbit simulations, the characteristics of variation of the angular distance between the two satellites is analyzed to figure out the time slots when laser ranging is allowed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.759-767
• /
• 2021

Most weapons systems that are Force Integration are expensive equipment that reflects the latest technology, and the operation and maintenance cost is increasing continuously. Factors that efficiently operate and maintain these weapon systems include maintenance plans, economic costs, and repair part requirements. Among them, predicting the repair parts requirements during the life cycle in advance is an important way to increase operation and maintenance cost efficiency and operating availability. The start of requirement analysis for repair parts is a calculation of the CSP (CSP: Concurrent Spare parts, CSP hereafter) that is distributed when the weapon system is deployed. The CSP is an essential component of achieving the operating availability during this period because the weapon system aims to successfully perform a given operation mission without resupply for an initial set period. In the present study, the CSP calculation method was analyzed, reflecting the failure rate and operating time of items, but the analyzed CSP was aimed at preparing for technical failure, but in the initial operating environment, it is limited in coping with unexpected failures caused by human error. The failure is not included in the scope of free maintenance and is a serious factor in making the weapon system inoperable during the initial operation period. To prevent the inoperable status of a weapon system, CSP that considers human error is required in the initial operating environment, and the calculation criteria and measures are proposed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.409-414
• /
• 2021

Tightness performance that blocks compartments is important for surface ships to achieve superior mission performance and survivability in combat environments. To meet the above requirements, airtightness of the structural elements and the appropriate strength to specific areas are checked during a test run after ship construction. In particular, air tests of compartments adjacent to the water surface are performed. In an air test, air is injected into the compartment up to the test pressure of the test memo. The pressure drop value is checked after 10 minutes to determine if the requirements of the corresponding area are satisfied. In summer, however, when the influence of the outside temperature is large, a phenomenon in which the internal pressure increases during the air test was identified. This phenomenon reduces the reliability of the test result. Therefore, a system was designed to compensate for temperature changes in the compartments through this study. The developed system calculates the amount of pressure change caused by a temperature change in the compartment and outputs a correction value. The pressure change was calculated using the ideal gas equation, reflecting the maintenance, increase, and decrease in temperature during the test process. A comparison of the calculated pressure correction value with the database of NIST REFPROP revealed a difference of 0.126% to a maximum of 0.253%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.941-948
• /
• 2022

Disaster response robots are deployed to disaster sites where human access is difficult and dangerous. The disaster response robots explore the disaster sites prevent a structural collapse and perform lifesaving to minimize damage. It is difficult to operate robots in the disaster sites due to rough terrains where various obstacles are scattered, communication failures and invisible environments. In this paper, we developed a series connectable wheeled robot module. The series connectable wheeled robot module was developed into two types: an active driven robot module and a passive driven robot module. A wheeled robot was built by connecting the two active type robot modules and one passive type robot module. Two robot modules were connected by one DoF rotating joint, allowing the wheeled robot to avoid obstructions in a vertical direction. The wheeled robot performed driving and obstacle avoidance using only pressure sensors, which allows the wheeled robot operate in the invisible environment. An obstacle avoidance experiment was conducted to evaluate the performance of the wheeled robot consisting of two active driven wheeled robot modules and one passive driven wheeled robot module. The wheeled robot successfully avoided step-shaped obstacles with a maximum height of 80 mm in a time of 24.5 seconds using only a pressure sensors, which confirms that the wheeled robot possible to perform the driving and the obstacle avoidance in invisible environment.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.42 no.6
• /
• pp.783-789
• /
• 1997

This study was conducted to identify leakage of fluorescent substances out of 56 crops and to develop sorting methods of nonviable seeds of Chinese cabbage. Fluorescent substances were detected from 36 species, Chinese cabbage, radish, broccoli, cauliflower, egg plant and rape seed etc. In Chinese cabbage, the germination rate of non-sorted seeds decreased rapidly with ageing of seeds at 45$^{\circ}C$ and 100％. After Chinese cabbage seeds soaked for 4hrs and coated with cellulose, the sorting ratio of non fluorescent seeds were decreased 91.3％ to 1.7％ by increasing ageing periods from control to 8 days, while fluorescent seeds were increased drastically from 8.7％ to 98.3％. Also, incubation of water soaked dead seeds of Chinese cabbage treated with 0.5-1.0％ ninhydrin and 0.01N sodium thiosulfate for 30~60 minutes at 35$^{\circ}C$ developed purple color.

• Convergence Security Journal
• /
• v.22 no.2
• /
• pp.131-141
• /
• 2022

Future battlefield domains are expanding to ground, sea, air, space, and cyber, so future military operations are expected to be carried out simultaneously and complexly in various battlefield domains. In addition, the application of convergence technologies that create innovations in all fields of economy, society, and defense, such as artificial intelligence, IoT, and big data, is being promoted. However, since the current Korean military C4I system manages warfighting function DBs in one DB server, the efficiency of combat performance is reduced utilization and distribution speed of data and operation response time. To solve this problem, research is needed on how to apply the 4th industrial revolution technologies such as AI, IoT, 5G, big data, and cloud to the Korean military C4I system, but research on this is insufficient. Therefore, this paper analyzes the problems of the current Korean military C4I system and proposes to apply the 4th industrial revolution technology in terms of operational mission, network and data link, computing environment, cyber operation, interoperability and interlocking capabilities.