• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.9
• /
• pp.1237-1244
• /
• 2001

An experimental study was carried out to identify the various regimes of natural convective pool boiling and to determine the boiling heat transfer curve and Critical Heat Flux(CHF) on a vertical square surface having a 70mm width and a 70mm height. The heater made of copper block with embedded cartridge heaters is submerged in a water tank at atmospheric pressure. As the heat flux increases from 100kW/㎡ to 1.2MW/㎡, the heat transfer regime migrates from the nucleate boiling to the film boiling. The boiling heat transfer data are fitted by Rohsenow type correlation. An explosive vapor generation on the heated surface, whose size and frequency are characterized by the heat flux, is visualized using a high speed digital imaging system.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2005.11a
• /
• pp.35-38
• /
• 2005

압축된 영상의 비트스트림에 오류가 발생할 경우 영상을 원할 때 심각한 왜곡이 발생하고, 이 때문에 멀티미디어 서비스에서 오류 보상 방법은 더욱 중요한 기술로 대두되고 있다. 기존의 연속된 블록을 복원하는 Hsia방법에서는 상하에 인접한 블록의 경계면에 따라 화소 값을 비교하고 정합벡터를 구하였다. 이와 같이 구해지 정합벡터는 주변 블록의 에지 분포에 대한 고려가 배제되기 때문에 정확한 블록의 복원을 이루어낼 수 없다. 이러한 문제를 해결하기 주변 블록의 에지 분포를 고려한다. 오류 블록을 중심으로 상단과 하단의 에지 분포를 고려하여 에지 방향으로 보간한다. 이때 에지 검출을 위해 Sobel 연산자를 이용하고 그 임계값은(Just-Noticeable-Distortion)/MND(Minimally- Noticeable Distortion)로 한다. 에지의 뭉개짐 현상을 막기 위하여 상단 블록과 하단 블록에 에지가 존재 하지 않을 때와 존재할 때를 구분해서 보간한다. 연속된 블록에 발생한 오류를 제안하는 방법으로 보상 할 경우 PSNR이 최대 2dB이상 향상된다.

• Nuclear Engineering and Technology
• /
• v.26 no.2
• /
• pp.237-246
• /
• 1994

A high flow critical heat flux (CHF) correlation, based on the single-pin CHF experimental data for finned and unfinned heated rods, was developed for the thermal-hydraulic design and safety analysis of the Korea Multi-purpose Research Reactor (KMRR) core. The correlation consists of dimensionless parameters such as Reynolds number, thermodynamic equilibrium quality, liquid-to-vapor density ratio, and hydraulic equivalent diameter ratio. The fin effect was taken into account in the correlation by a finned-to-unfinned heated perimeter ratio. The effects of a cold wall and non-uniform axial power distribution ore discussed to verify the applicability of the single-pin based correlation to the KMRR fuel bundle. The correlation limit departure from nucleate boiling ratio (DNBR) was determined as 1.44 from the statistical analysis of the CHF data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1138-1146
• /
• 2006

It is very important for the sensor network to save battery capacity. Switching active mode to sleep mode is used for S-MAC protocol and expiring timer before end of the active part is used for T-MAC in order to extend battery life span. We proposed IS-MAC (Improved Sensor MAC) which gives more energy efficiency than S-MAC and T-MAC To improve energy efficiency in sensor network, we used the threshold value in buffer to transmit data packet and proposed the method to reduce the number of control packets which cause extra battery consumption. Based on the analytical results, we found that the proposed IS-MAC protocol shows better performance than conventional MAC protocols.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.5
• /
• pp.584-594
• /
• 1999

이 논문에서는 CDMA(Code Division Multiple Access)셀룰러 시스템에서 우선순위 큐(Queue)에 기반을 둔 핸드오프채널할당기법의 모델을 제안하였다. 또한 제안한 모델의 성능을 컴퓨터 시뮬레이션을 통해 비우선순위기법 및 FIFO(First In First Out)큐기법과 비교하였다. 제안하는 모델의 핸드오프 채널할당 기법에서는 이동국의 진행방향에 있는 인접 셀(Neighbor Cell)의 파일롯 중에서 임계치가 T-ADD 이상인 파일롯이 있을 경우 기지국이 이 파일롯(Pilot)에 대한 파일롯 세기 측정메시지를 이동국으로부터 수신 한 지점에서 드롭타이머가 종료된후 현재의 셀에서 사용중인 파일롯에 대한 파일롯 세기 측정 메시지를 이동국으로부터 수신한 시점까지 핸드오프 처리가능 영역으로 정의하고 이를 우선순위 큐의 최대큐 대기시간으로 사용하였다. 제안된 기법의 성능을 분석하기 위한 성능평가 척도는 강조종료확률, 호 블록킹 확률, 전체 제공 트래픽에 대한 수행 트래픽 비율, 평균 규크기미치 핸드오프 시 평균 지연시간이다. 성능시뮬레이션결과, 제안된 기법이 전체 시스템 호처리 용량면에서 약간의 단점은 발생하지만 핸드오프 처리에 있어서 높은 성능을 유지함을 알수 있었다.

• Korean Journal of Materials Research
• /
• v.4 no.5
• /
• pp.590-599
• /
• 1994

A work on the brittle to ductile transition (BDT) in single crystal alumina has been performed to understand and assess the dynamics of dislocation mobility around crack tip of brittle material. The critical stress intensity factor and yield strengths were obtained from bending test using precracked specimens at elevated temperatures. It was found that the BDT temperature was dependent on strain rate and orientation of specimen : for (1120) fracture surface, $1034^{\circ}C$, $1150^{\circ}C$ for $4.2 \times 10^{-6}$, $4.2 \times 10^{-7}s^{-1}$ respectively. Under a 4 point bending test, the moving distance of dislocation generated near crack front in ductile range is determined by an etch pits method. The velocity of dislocation in sapphire obtained from the double etching method was applied to modelling study.

• Korean Journal of Optics and Photonics
• /
• v.14 no.3
• /
• pp.327-330
• /
• 2003

We present the fabrication and measured performance of a wavelength tunable Butt coupled DBR-LD. An average coupling efficiency between active layer and passive waveguide layer was measured over 85％per facet, and the average threshold current was 21 ㎃ for the waveguide integrated DBR laser. High output power of Butt coupled DBR-LD was obtained over 25 ㎽. As high as 25 ㎽ of output power was achieved by the butt coupled method. The maximum wavelength tuning range is about 7.4 nm, and the side mode suppression ratio was more than 40 ㏈ using 1.3 ${\mu}{\textrm}{m}$ InGaAsP waveguide layer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3176-3183
• /
• 2010

A multi-scale fatigue life prediction methodology of composite pressure vessels subjected to multi-axial loading has been proposed in this paper. The multi-scale approach starts from the constituents, fiber, matrix and interface, leading to predict behavior of ply, laminates and eventually the composite structures. The multi-scale fatigue life prediction methodology is composed of two steps: macro stress analysis and micro mechanics of failure based on fatigue analysis. In the macro stress analysis, multi-axial fatigue loading acting at laminate is determined from finite element analysis of composite pressure vessel, and ply stresses are computed using a classical laminate theory. The micro stresses are calculated in each constituent from ply stresses using a micromechanical model. Three methods are employed in predicting fatigue life of each constituent, i.e. a maximum stress method for fiber, an equivalent stress method for multi-axially loaded matrix, and a critical plane method for the interface. A modified Goodman diagram is used to take into account the generic mean stresses. Damages from each loading cycle are accumulated using Miner's rule. Monte Carlo simulation has been performed to predict the overall fatigue life of a composite pressure vessel considering statistical distribution of material properties of each constituent, fiber volume fraction and manufacturing winding angle.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.6
• /
• pp.678-686
• /
• 2019

In this study, marine heat waves on coastal waters of Republic of Korea were detected using satellite-based Sea Surface Temperature Anomaly (SSTA). The detected results were compared with the warm water issues reported by the National Institute of Fisheries Science (NIFS). Marine heat waves detection algorithm using SSTA based on a threshold has proposed. The threshold value was defined as 2℃ for caution and 3℃ for warning issues, respectively. Daily averaged SST data from July to September of 2017-2018 were used to generate SSTA. The satellite-based detection results were classified into nine areas according to the place names used in the NIFS warm water issues. In the comparison of frequency of marine heat waves occurrence to each area with the warm water issue, most areas in the southern coast showed a similar pattern, that is probably NIFS uses spatially well distributed buoys. On the other hand, other sea areas had about two times more satellite detection results. This result seems to be because NIFS only considers the water temperature data measured at limited points. The results of this study are expected to contribute to the development of a satellite-based warm/cold water monitoring system in coastal waters.

• Fire Science and Engineering
• /
• v.24 no.6
• /
• pp.1-6
• /
• 2010

A smoldering ground fire can be a probable cause of reignition of surface fire when transmitted from Fermentation layer to Humus layer with temperature higher than that of ignition. Purpose of this paper is to identify experimental methodology on the potential risk of a smoldering ground fire, which is similar to the real surface fuel bed, and its combustion characteristics. The fuel model designed in this study is composed of 3 layers such as Litter layer, Fermentation layer and Humus layer and 8 Thermocouples are set through 3 layer at each boundary and in between to detect the temperature change and duration of smoldering and propagation velocity. As a result, it was observed that ignition conditions in the boundary between L layer and F layer determined transmission and non-transmisstion to F-H layer. In addition, range of critical humidity at which a smoldering ground fire was transmitted in a material layer was 33~44% and when temperature exceeds $350^{\circ}C$, likelihood of transmission of a smoldering ground fire was high. In the research, the experimental model for multi-layer smoldering ground fire is suggested and information about propagation of smoldering fire, possibility of reignition according to moisture content, propagation velocity and temperature change are obtained, Also, the built-up methods were established to help analyze basic characteristics of smoldering ground fire.