• 한국공간정보시스템학회:학술대회논문집
• /
• 2007.06a
• /
• pp.156-161
• /
• 2007

도시화에 따른 도시문제발생이라는 결과로 미루어 볼 때, 지속적인 도시 성장을 위한 도시 성장 관리는 필수적이며, 이것을 위해서 도시지역을 추출하는 것은 도시의 성장 추이를 파악할 수 있게 한다는 점에서 매우 의미 있는 일이다. 본 연구에서는 도시 성장 모니터링에 있어서 정규식생지수(NDVI)와 정규시가지화지수(NDBI)를 결합한 방법의 활용성을 규명하는데 목적을 두었다. 이를 위해 토지피복분류에 일반적으로 사용되는 감독 분류기법과 도시지역추출에 이용되는 NDVI와 NDBI를 결합한 방법(식생지수결합법)으로 1988년과 2000년 두 시기의 Landsat TM 영상을 이용하여 도시지역을 추출하고 일치도를 분석하였다. 분석 결과, 1988년 식생지수결합법과 감독분류기법으로 추출한 도시지역의 일치도는 98%, 식생지수결합법 비도시지역으로 추출된 지역이 감독분류기법으로는 도시지역으로 추출될 확률은 37.35%로 나타났고, 같은 경우 2000년은 각각 99.3%와 7.7%로 나타났다. 이를 통해 식생지수결합법을 사용한 도시지역 추출 결과와 감독분류기법을 사용한 도시지역 추출 결과의 일치도가 비교적 높게 나타남을 알 수 있었다. 또, 각 기법을 통한 도시지역 추출 결과와 실제 도시 검사점과의 일치도의 분석을 통해서도 도시지역 추출 결과의 일치도가 비교적 높게 나타났다. 따라서 분류를 통한 도시지역 추출 방법에 비해 식생지수결합법을 이용한 도시지역 추출이 절차상 수월한 점을 감안하면 도시지역 추출에 있어서 식생지수결합법의 효율성을 입증할 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1642-1652
• /
• 2012

Generally, a camera isn't located at the center of display in a tele-presence system and it causes an incorrect eye contact between speakers which reduce the realistic feeling during the conversation. To solve this incorrect eye contact problem, we newly propose an intermediate view reconstruction algorithm using both a color camera and a depth camera and applying for the depth image based rendering (DIBR) algorithm. In the proposed algorithm, an efficient hole filling method using the arithmetic mean value of neighbor pixels and an efficient boundary noise removal method by expanding the edge region of depth image are included. We show that the generated eye-contacted image has good quality through experiments.

• Tunnel and Underground Space
• /
• v.29 no.4
• /
• pp.230-242
• /
• 2019

While various automatic rock fracture survey methods have been researched, the evaluation of the accuracy of these methods raises issues due to the absence of a metric which fully expresses the similarity between automatic and manual fracture maps. Therefore, this paper proposes a geometry similarity metric which is especially designed to determine the overall similarity of fracture maps and to evaluate the accuracy of rock fracture survey methods by a single number. The proposed metric, Scanline Intersection Similarity (SIS), is derived by conducting a large number of scanline surveys upon two fracture maps using Python code. By comparing the frequency of intersections over a large number of scanlines, SIS is able to express the overall similarity between two fracture maps. The proposed metric was compared with Intersection Over Union (IoU) which is a widely used evaluation metric in computer vision. Results showed that IoU is inappropriate for evaluating the geometry similarity of fracture maps because it is overly sensitive to minor geometry differences of thin elongated objects. The proposed metric, on the other hand, reflected macro-geometry differences rather than micro-geometry differences, showing good agreement with human perception. The metric was further applied to evaluate the accuracy of a deep learning-based automatic fracture surveying method which resulted as 0.674 (SIS). However, the proposed metric is currently limited to 2D fracture maps and requires comparison with rock joint parameters such as RQD.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.37-46
• /
• 2012

In the existing data dissemination methods for mobile P2P networks, the search performance of content that matches the peer profile is very excellent. However, in the search for content that does not match the their profile, additional consideration about case that contents does not match the profile is needed because costs for the query processing will be incurred. To solve these problems, we propose a new data dissemination method for efficient contents search in mobile P2P networks. In the proposed method, peers determine whether they experienced communications by using a timestamp message and then perform data dissemination. We also propose a ranking algorithm to efficiently store dissemination data in a limited memory. The proposed ranking method can reduce query messages by considering the profile matches, the distribution range, and the connectivity to the data distribution peer.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.988-995
• /
• 2008

A consensus-based feedback linearization method is proposed to maintain a specified time-varying geometric configuration for formation flying of multiple autonomous vehicles. In this approach, there exists no explicit leader in the team, and the proposed control strategy requires only the local neighbor-to-neighbor information between vehicles. The information flow topology between the vehicles is defined by Graph Laplacian matrix, and the formation flying can be achieved by the proposed feedback linearization with consensus algorithm. The stability analysis of the proposed controller is also performed via eigenvalue analysis for the closed-looop system. Numerical simulation is performed for rotary-wing type micro aerial vehicles to validate the performance of the proposed controller.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.8 no.4
• /
• pp.313-318
• /
• 2014

In this paper, we propose a method for correcting the measurement axis twist that occurs in the process of wearing and each estimation method of joint in which the inertial measurement unit based in health arm by the method of operation upper limb rehabilitation equipment of hemiplegic patients. In order to verify the proposed method, it is fitted with a inertial measurement unit of the upper arm and forearm of the experimenter left arm, verified by comparing actual joint angle is detected by photographing the arbitrary posture, the angle that the estimated joint. Then, it was verified by comparing the applied front / rear techniques for correcting the measurement axis twist. A result of the experiment, before applying the measurement axis twist correction, joint, after but each match rate showed a weak concordance rate in 89.16% and were corrected, measurement axis twist, each concordance rate of joint agreement of 93.28% I understand that it has been 4.12% improvement in the rate.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10b
• /
• pp.559-561
• /
• 2000

현재 활발한 연구가 진행중인 유전자 분석과 같은 분야에서는 유전자 염기 서열과 같은 대규모 서열 정보들에 대한 효과적인 분석기술을 요구하고 있다. 본 논문은 이러한 서열 정보들 사이의 유사도를 측정하고 분석하는 작업을 효과적으로 지원하기 위한 가시화 도구의 개발을 다룬다. 본 논문에서 사용하는 유사도 가시화 기법은 유전자 정보의 유사도 가시화를 위해 제안되었던 시각적 점-행렬 도면(Graphical Dot-Matrix Plots) 기법을 이용하는데, 이 시각적 점-행렬 도면 기법은 비교 대상이 되는 서열 정보의 크기가 커지면 효율적으로 가시화하기가 힘들다는 단점을 가진다. 본 논문은 시각적 점-행렬 도면 기법의 이러한 문제를 해결하기 위해 서열 정보 유사도 비교 결과를 화면의 해상도 내에서 표현할 수 있도록 데이터를 영역별로 분할하고 각 영역별 일치도를 이분 그래프(bipartite graph)의 최대 평면 일치(maximal planar matching)를 이용하여 결정하고 이를 하나의 화소(pixel)로 출력하는 기법을 제안한다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.340-340
• /
• 2016

불연속 지형을 지나는 천수 흐름의 해석에서 흐름률을 정확하게 계산하기 위하여 계단에 의한 흐름 저항이 지배적인 계단 전면과 그 영향이 비교적 덜한 계단의 윗부분을 구분하여 접근하는 새로운 기법이 제안되었다(Hwang, 2015). 이 기법에 의한 모의 결과는 정확해, 가상의 문제에 대한 3차원 모의 결과, 그리고 실험 결과와 비교하여 대체로 만족스런 일치를 보인 바 있으나, 그 기법의 개선을 위해 보다 다양한 문제에 대해 검토할 필요가 있다. 이 연구에서는 높이 0.01 m인 계단의 전면 및 후면을 지나는 댐 붕괴 흐름에 대한 실험(Kim et al., 2014)에 대해 Hwang (2015)의 새로운 기법을 적용하고 그 결과를 비교하였다. 기존 모형(SGMS)의 결과에 비해 새로운 기법에 의한 결과(STP-TH)는 전면 계단의 앞(P2)과 뒤(P3) 그리고 후면 계단의 앞(P4)과 뒤(P5)에서 상류 저수지의 수심이 0.1 m인 실험 경우에 의한 수위와 더 잘 일치하였다.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.1
• /
• pp.51-57
• /
• 2011

Purpose: The aim of this study is to identify clinical usefulness of Wide Beam Reconstruction (WBR) which is called Xpress.cardiac$^{TM}$ to confirm the agreement between segmental perfusion and regional wall motion in myocardium compared to conventional OSEM method. Materials and Methods: Subjects were separated two groups. First group was composed of 20 normal control group. Second group was composed of 10 patients (abnormal group) who had coronary artery disease. Subjects underwent myocardial perfusion SPECT ($^{201}Tl$ rest and $^{99m}Tc$-MIBI stress). Image acquisition and reconstruction were that rest stage was each step per 30, 15 seconds and stress stage was each step per 25, 13 seconds, OSEM and WBR methods were applied. Segmental perfusion and regional wall motion were applied 20-segment model of QPS, QGS algorithm in AutoQuant. Status of perfusion was composed of 5 point scoring system (0=normal, 1=mild, 2=moderate, 3=severe hypokinesia, 4=dyskinesia). Status of regional wall motion was also composed of 5 point scoring (0=normal, 1=mild, 2=moderate, 3=severe hypokinesia, 4=dyskinesia). We evaluated the agreement between conventional OSEM and WBR through automatic quantification value. Results: The agreement of rest segmental perfusion between conventional OSEM and WBR in normal patients was 99% (396/400, k=0.662, p<0.0001) and one of rest regional wall motion was 83.8% (335/400, k=0.283), the agreement of stress segmental perfusion was 95.8%(383/400, k=0.656), one of stress regional wall motion was 87.3% (349/400, k=0.390). The match rate of rest segmental perfusion in abnormal patients was 83% (166/200, k=0.605, p<0.0001) and one of rest regional wall motion was 55.5% (111/200, k=0.385), the agreement of stress segmental perfusion was 79.5% (159/200, k=0.682), one of stress regional wall motion was 63.5% (127/200, k=0.486). Conclusion: Compared to conventional OSEM, WBR method had a good agreement of segmental perfusion in myocardium in normal and abnormal groups. However regional wall motion showed meaningful low agreement. Although WBR offers high resolution and contrast ratio, it is not useful method for gated myocardial perfusion SPECT.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.1
• /
• pp.89-99
• /
• 2015

The World Economic Forum and the Korean Ministry of Knowledge Economy have selected big data as one of the top 10 in core information technology. The key of big data is to analyze effectively the properties that do have data. Clustering analysis method of big data techniques is a method of assigning a set of objects into the clusters so that the objects in the same cluster are more similar to each other clusters. Similarity measures being used in the cluster analysis may be classified into various types depending on the nature of the data. In this paper, we studied upper and lower bounds for binary similarity measures with negative matches such as Russel and Rao measure, simple matching measure by Sokal and Michener, Rogers and Tanimoto measure, Sokal and Sneath measure, Hamann measure, and Baroni-Urbani and Buser mesures I, II. And the comparative studies with these measures were shown by real data and simulated experiment.