• Journal of Nutrition and Health
• /
• v.9 no.4
• /
• pp.54-58
• /
• 1976

Deterioration of ascorbic acid content is the important factor in the food quality. The degradation of ascorbic acid undergoes as a first-order of reaction in the presence of excess oxygen content. However, under the limited oxygen content, ascorbic acid decomposes as a psudo-first order of reaction. The ascorbic acid, in this study, under the limited dissolved oxygen content in the presesce of iron(III) and copper(II) decomposed as first-order reaction with a little influence in rate constant and the light was an accelerating factor on the ascorbic acid degradation.

• Journal of Korean Society of Environmental Engineers
• /
• v.35 no.10
• /
• pp.710-716
• /
• 2013

New and renewable energy sources have drawn attention because of climate change. Many studies have been carried out in waste-to-energy field. Fast pyrolysis of waste lignocelluosic biomass is one of the waste-to-energy technologies. Bubbling fluidized bed (BFB) reactor is widely used for fast pyrolysis of the biomass. In BFB pyrolyzer, bubble behavior influences on the chemical reaction. Accordingly, in the present study, hydrodynamic characteristics and fast pyrolysis reaction of waste lignocellulosic biomass occurring in a BFB pyrolyzer are scrutinized. The computational fluid dynamics (CFD) simulation of the fast pyrolysis reactor is carried out by using Eulerian-Granular approach. And two-stage semi-global kinetics is applied for modeling the fast pyrolysis reaction of waste lignocellulosic biomass. To summarize, generation and ascendant motion of bubbles in the bed affect particle behavior. Thus biomass particles are well mixed with hot sand and consequent rapid heat transfer occurs from sand to biomass particles. As a result, primary reaction is observed throughout the bed. And reaction rate of tar formation is the highest. Consequently, tar accounts for 66wt.% of the product gas. However, secondary reaction occurs mostly in the freeboard. Therefore, it is considered that bubble behavior and particle motions hardly influences on the secondary reaction.

• YAKHAK HOEJI
• /
• v.21 no.2
• /
• pp.62-69
• /
• 1977

지구상에서 생합성된 천연물은 완급의 차이는 있겠으나 궁극적으로는 CO$_{2}$ H$_{2}$O, NH$_{3}$ 등으로 다시 산화분해된다. 이 분해과정은 미생물의 효소반응으로 이루어지며 생물권의 항상성도 일차적으로는 미생물의 이 산화분해작용으로 유지된다고 볼 수 있다. 미생물이 영위하는 이러한 효소반응을 생리활성물질의 공업적합성에 이용한 초기의 예로는 부현피질호르몬의 합성과정에서 Rhizopus nigricans를 사용한 수산화반응과 ascorbic acid 합성과정에서 Acetobacter xylinum을 사용한 탈수반응이 유명하며 이러한 반응은 아직도 이용되고있다. 특히 지난 십수년간의 응용미생물학의 발전은 대단한 것이며 여러가지 항생물질, 당질, amino산, 핵산관련물질들이 생리활성물질과 함께 발효법으로 생산되고 있다. 그러나 이글에서 다루는 미생반응은 발효과정에서 생산되는 미생물자체의 일차적 대사산물 (primary metabolite)이나 이차적대사산물 (secondary metabolite)를 대상으로 한것이 아니며 어디까지나 외부에서 공급되는 화학물질에 대한 균체의 효소반응산물을 목적물로 하고있다. 또한 근래 활발히 이용되는 균체고정및 효소고정법을 이용한 효소공학적수법도 제외하고 배양과정의 균체 또는 배양후의 군체를 이용한 미생물반응에 한정코저 한다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.09a
• /
• pp.113-116
• /
• 2002

UV/과산화수소법을 적용하여 유기염소계 농약인 chlorothalonil을 분해하는 공정에 있어서 광화학 반응의 효율을 증대시키는 방안으로 과산화수소와 옥살산염의 최적 주입농도를 선정하여 그 제거효율을 비교하였다. 그 결과 UV조사시 과산화수소의 농도가 100ppm일 때 일차반응속도 상수(k)가 0.0869로 가장 높게 나타났으며 옥살산염에서는 1mM일 때 0.1782로 높게 나타남으로써 과산화수소와 옥살산염의 최적 농도를 산출할 수가 있었다. 최적 과산화수소와 옥살산염을 조합하여 UV조사시 반응속도 상수값(k)이 0.1893으로 UV/옥살산염보다도 분해속도가 빠르게 나타났다.

• Journal of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.115-120
• /
• 1980

A kinetic study of the methanolysis of t-butylbromide and benzoylchloride in methanol-acetonitrile mixtures is reported. First order rate constants for the methanolysis of t-butyl bromide show maximum at $X_{MeOH}$=0.75∼0.9 and 25∼$50^{\circ}C$. Apparent second order rate constants for the methanolysis of benzoylchloride also show maximum at $X_{MeOH}$= 0.6∼0.95 and 12∼$26^{\circ}C$. The maximum rate is ascribed to the solvent structure change; the addition of acetonitrile to methanol perturbs the methanol structure increasing the free methanol molecules available to stabilize the transition state for the methanolysis of t-butylbromide and benzoylchloride. It has been shown that methanol acts as nucleophilic and electrophilic catalyst upon methanolysis of t-butylbromide and as electrophilic catalyst upon methanolysis of benzoylchloride.

• Journal of the Korean Chemical Society
• /
• v.43 no.5
• /
• pp.505-510
• /
• 1999

$TiO_2$ powders were prepared via hydrolysis of titanium n-butoxide in n-butanol and hydrolysis mechanism of titanium n-butoxide was studied using UV-Vis spectrometer. Hydrolysis reactions were controlled to proceed to pseudo-first order reaction in the presence of excess water. The phases of $TiO_2$ powders, prepared under the these conditions, were identified by XRD and reaction rates were calculated by Gugggenheim method. Prepared powders were noncrystalline states in their initial stage of formation but transformed to crystalline rutile structure by heating. Reaction mechanism of titanium n-butoxide was proposed as Interchange-Associative(Ia) mechanism, based on the data of n-value and termodynamic parameters which were determined from the rate constants.

• Applied Chemistry for Engineering
• /
• v.7 no.4
• /
• pp.794-801
• /
• 1996

$TiO_2$ fine powders were synthesized via hydrolysis reaction of titanium isopropoxide in isopropanol solvent and the reaction rates were studied by use of UV spectroscopic method. The reactions were controlled to proceed to pseudo-first-order reaction in the presence of excess water in isopropanol solvent. The rate constants which varied with temperature and concentration of water were calculated by Guggenheim method. Reactions using $D_2O$ were also carried out to determine the catalytic character of water. n value of water molecules in transition state and the thermodynamic parameters showed that the reaction proceeded by $S_N2$ mechanism. $TiO_2$ powders synthesized in this reaction were almost spheric forms and had average particle size of $0.3{\mu}m$ diameter.

• Journal of the Korean Chemical Society
• /
• v.39 no.10
• /
• pp.830-833
• /
• 1995

• Proceedings of the Membrane Society of Korea Conference
• /
• 1992.10a
• /
• pp.9-9
• /
• 1992

막 반응기(membrane reactor)는 365 nm 의 파장을 갖는 UV를 담체튜브 및 코팅막에 조사시켜 막 표면에서 유기물의 산화반응이 일어날수 있도록 고안하였으며 일차적으로 formic acid의 산화효율을 측정하였다. 코팅된 담체는 코팅하지 않은 담체에 비해 flux가 상당히 저하하는 반면에 formic acid의 산화효율은 이에 비례하여 증가하였다. 또한 본 실험의 결과로부터 수처리공정에서 문제시되는 난분해성 유기물질의 산화분해처리에 대한 광촉매 막의 응용성을 제시하고자 한다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.25 no.4
• /
• pp.608-616
• /
• 1996

To propose the use of skipjack processing by-product(SPB) as a food material, the optimal condition for the production of the SPB hydrolysate through enzyme treatment was obtained using RSM(Response Surface Methodology). Among eight pretenses test, Pretense $P^{TM}$ was screened primarily on the aspect of production cost and taste of the product. The extent of autolysis accompanied by endogenous enzyme in the SPB was almost negligible as compared with that of Protense $P^{TM}$ treatment. The derived model equation was within the satisfiable range as indicated by coefficient of $determination(R^2=0.9460)$ and lack of fit(p>0.1) values. From the results of RSM and ridge analysis, the conditions favoring the higllest degree of hydrolysis were: PH 7.2, $51^{\circ}C,$ reaction time of 3.94 hr, substrate concentration of 33.3%, and enzym $e_strate ratio of 0.48%.48%.8%.